Update cs42l43b load detection procedure
Subsystems (4)
v2 cover Update cs42l43b load detection procedure
Some updates are required to ensure proper accuracy on the cs42l43b headphone load detection. Add the required extra register to the regmap in the MFD and then update the procedure in ASoC.
Changes since v1:
- Make LOAD_DET_SEL readable
Charles Keepax (2):
mfd: cs42l43: Add load detection register needed for cs42l43b
ASoC: cs42l43: Update load detect procedure for cs42l43b
drivers/mfd/cs42l43.c | 2 + include/linux/mfd/cs42l43-regs.h | 2 + sound/soc/codecs/cs42l43-jack.c | 101 ++++++++++++++++++++----------- 3 files changed, 71 insertions(+), 34 deletions(-)
Signature · 1 line
2.47.3
PATCH v2 1/2 mfd: cs42l43: Add load detection register needed for cs42l43b
The headphone load detection procedure on cs42l43b is slightly different and require a register that wasn't used on previous versions of the chip. Add that register into the driver.
---
Changes since v1:
- Make LOAD_DET_SEL readable
drivers/mfd/cs42l43.c | 2 ++ include/linux/mfd/cs42l43-regs.h | 2 ++ 2 files changed, 4 insertions(+)
drivers/mfd/cs42l43.c +2 -0
@@ -402,6 +402,7 @@ bool cs42l43_readable_register(struct device *dev, unsigned int reg)case CS42L43_BLOCK_EN :case CS42L43_SHUTTER_CONTROL : case CS42L43B_MCU_SW_REV ... CS42L43B_MCU_RAM_MAX: +case CS42L43B_LOAD_DET_SEL :return true;// registers present on all variants case CS42L43_MCU_SW_REV ... CS42L43B_MCU_SW_REV - 1: case CS42L43B_MCU_RAM_MAX + 1 ... CS42L43_MCU_RAM_MAX:
@@ -425,6 +426,7 @@ bool cs42l43_precious_register(struct device *dev, unsigned int reg)case CS42L43_RX_DATA : case CS42L43_DECIM_INT ... CS42L43_HPOUT_INT: case CS42L43_MCU_SW_REV ... CS42L43_MCU_RAM_MAX: +case CS42L43B_LOAD_DET_SEL :return true;default :return false;
include/linux/mfd/cs42l43-regs.h +2 -0
@@ -1204,6 +1204,8 @@#define CS42L43B_ISRC2DEC3_INPUT1 0x0000C7A0#define CS42L43B_ISRC2DEC4_INPUT1 0x0000C7B0 +#define CS42L43B_LOAD_DET_SEL 0x000170E8 +#define CS42L43B_FW_MISSION_CTRL_NEED_CONFIGS 0x00117E00#define CS42L43B_FW_MISSION_CTRL_HAVE_CONFIGS 0x00117E04#define CS42L43B_FW_MISSION_CTRL_PATCH_START_ADDR_REG 0x00117E08
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH v2 1/2] mfd: cs42l43: Add load detection register needed for cs42l43b
Sashiko has reviewed this patch and found no issues.
Quoted 5 lines
The headphone load detection procedure on cs42l43b is slightly different and require a register that wasn't used on previous versions of the chip. Add that register into the driver.
Signed-off-by Charles Keepax <[email protected]>
Sashiko has reviewed this patch and found no issues.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Re: (subset) [PATCH v2 1/2] mfd: cs42l43: Add load detection register needed for cs42l43b
In reply to Charles KeepaxQuoted 3 lines · Charles Keepax
The headphone load detection procedure on cs42l43b is slightly different and require a register that wasn't used on previous versions of the chip. Add that register into the driver.
Applied, thanks!
[1/2] mfd: cs42l43: Add load detection register needed for cs42l43b
commit: cc29c6e45db7b4306efc7a76e7a64d549229d4ac
--
Lee Jones [李琼斯]
Mark Brown
maintainerRe: (subset) [PATCH v2 1/2] mfd: cs42l43: Add load detection register needed for cs42l43b
Quoted 9 lines · Lee Jones
Quoted 3 lines · Charles Keepax
The headphone load detection procedure on cs42l43b is slightly different and require a register that wasn't used on previous versions of the chip. Add that register into the driver.
Applied, thanks!
[1/2] mfd: cs42l43: Add load detection register needed for cs42l43b
commit: cc29c6e45db7b4306efc7a76e7a64d549229d4ac
Can I get a tag for this please, I need the register definitions it adds to build patch 2?
PATCH v2 2/2 ASoC: cs42l43: Update load detect procedure for cs42l43b
In reply to Charles KeepaxThe newer variants requires a slightly different process for the load detection. It is no longer necessary to apply different tuning for 3 vs 4-pole headsets, but a new field does require updated for CTIA vs OMTP headsets. Update the driver to follow the correct process for this new version of the chip.
---
No changes since v1.
sound/soc/codecs/cs42l43-jack.c | 101 +++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 34 deletions(-)
sound/soc/codecs/cs42l43-jack.c +67 -34
@@ -324,6 +324,11 @@ irqreturn_t cs42l43_bias_detect_clamp(int irq, void *data)#define CS42L43_JACK_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | \ SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5) +#define CS42L43_TYPE_CTIA 0x0 +#define CS42L43_TYPE_OMTP 0x1 +#define CS42L43_TYPE_3POLE 0x2 +#define CS42L43_TYPE_OPEN 0x3 +static inline bool cs42l43_jack_present (struct cs42l43_codec *priv) {struct cs42l43 *cs42l43 = priv->core;
@@ -502,9 +507,11 @@ static const struct reg_sequence cs42l43_4pole_patch[] = { { 0x4000, 0x00000000 }, }; -static void cs42l43_start_load_detect (struct cs42l43_codec *priv,bool mic) +static void cs42l43_start_load_detect (struct cs42l43_codec *priv,int type) {struct cs42l43 *cs42l43 = priv->core; +const struct reg_sequence *patch; +int size;dev_dbg (priv->dev,"Start load detect\n" );
@@ -526,14 +533,36 @@ static void cs42l43_start_load_detect(struct cs42l43_codec *priv, bool mic)dev_err (priv->dev,"Load detect HP power down timed out\n" ); } -if (mic) -regmap_multi_reg_write_bypassed (cs42l43->regmap, - cs42l43_4pole_patch, -ARRAY_SIZE (cs42l43_4pole_patch)); -else -regmap_multi_reg_write_bypassed (cs42l43->regmap, - cs42l43_3pole_patch, -ARRAY_SIZE (cs42l43_3pole_patch)); +switch (cs42l43->variant_id) { +case CS42L43_DEVID_VAL : +switch (type) { +case CS42L43_TYPE_3POLE : +case CS42L43_TYPE_OPEN : + patch = cs42l43_3pole_patch; + size =ARRAY_SIZE (cs42l43_3pole_patch); +break ; +default : + patch = cs42l43_4pole_patch; + size =ARRAY_SIZE (cs42l43_4pole_patch); +break ; + } +break ; +default : + patch = cs42l43_4pole_patch; + size =ARRAY_SIZE (cs42l43_4pole_patch); + +switch (type) { +case CS42L43_TYPE_OMTP : +regmap_write (cs42l43->regmap,CS42L43B_LOAD_DET_SEL ,0x89 ); +break ; +default : +regmap_write (cs42l43->regmap,CS42L43B_LOAD_DET_SEL ,0x98 ); +break ; + } +break ; + } + +regmap_multi_reg_write_bypassed (cs42l43->regmap, patch, size);regmap_update_bits (cs42l43->regmap,CS42L43_BLOCK_EN3 ,CS42L43_ADC1_EN_MASK |CS42L43_ADC2_EN_MASK ,0 );
@@ -586,6 +615,14 @@ static void cs42l43_stop_load_detect(struct cs42l43_codec *priv)CS42L43_ADC1_EN_MASK |CS42L43_ADC2_EN_MASK , priv->adc_ena); +switch (cs42l43->variant_id) { +case CS42L43_DEVID_VAL : +break ; +default : +regmap_write (cs42l43->regmap,CS42L43B_LOAD_DET_SEL ,0x0 ); +break ; + } +if (priv->hp_ena && !priv->hp_ilimited) {unsigned long time_left;
@@ -605,7 +642,7 @@ static void cs42l43_stop_load_detect(struct cs42l43_codec *priv)snd_soc_dapm_mutex_unlock (snd_soc_component_to_dapm (priv->component)); } -static int cs42l43_run_load_detect (struct cs42l43_codec *priv,bool mic) +static int cs42l43_run_load_detect (struct cs42l43_codec *priv,int type) {struct cs42l43 *cs42l43 = priv->core;unsigned int val =0 ;
@@ -613,7 +650,7 @@ static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)reinit_completion (&priv->load_detect); -cs42l43_start_load_detect (priv, mic); +cs42l43_start_load_detect (priv, type); time_left =wait_for_completion_timeout (&priv->load_detect,msecs_to_jiffies (CS42L43_LOAD_TIMEOUT_MS ));cs42l43_stop_load_detect (priv);
@@ -629,23 +666,25 @@ static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)if (!cs42l43_jack_present (priv))return -ENODEV ; -if (mic) { +switch (type) { +case CS42L43_TYPE_3POLE : +case CS42L43_TYPE_OPEN : +switch (val &CS42L43_AMP3_RES_DET_MASK ) { +case 0x0 :// < 22 Ohm impedance +case 0x1 :// < 150 Ohm impedance +case 0x2 :// < 1000 Ohm impedance +return CS42L43_JACK_HEADPHONE ; +case 0x3 :// > 1000 Ohm impedance +return CS42L43_JACK_LINEOUT ; +default : +return -EINVAL ; + } +default :cs42l43_start_hs_bias (priv, false);cs42l43_start_button_detect (priv);return CS42L43_JACK_HEADSET ; } - -switch (val &CS42L43_AMP3_RES_DET_MASK ) { -case 0x0 :// < 22 Ohm impedance -case 0x1 :// < 150 Ohm impedance -case 0x2 :// < 1000 Ohm impedance -return CS42L43_JACK_HEADPHONE ; -case 0x3 :// > 1000 Ohm impedance -return CS42L43_JACK_LINEOUT ; -default : -return -EINVAL ; - } }static int cs42l43_run_type_detect (struct cs42l43_codec *priv)
@@ -686,18 +725,12 @@ static int cs42l43_run_type_detect(struct cs42l43_codec *priv)if (!cs42l43_jack_present (priv))return -ENODEV ; -switch (type &CS42L43_HSDET_TYPE_STS_MASK ) { -case 0x0 :// CTIA -case 0x1 :// OMTP -case 0x4 : -return cs42l43_run_load_detect (priv, true); -case 0x2 :// 3-pole -return cs42l43_run_load_detect (priv, false); -case 0x3 :// Open-circuit + type &=CS42L43_HSDET_TYPE_STS_MASK ; + +if (type ==CS42L43_TYPE_OPEN )return CS42L43_JACK_EXTENSION ; -default : -return -EINVAL ; - } +else +return cs42l43_run_load_detect (priv, type); }void cs42l43_clear_jack (struct cs42l43_codec *priv)
Signature · 1 line
2.47.3
[email protected]
AI reviewRe: [PATCH v2 2/2] ASoC: cs42l43: Update load detect procedure for cs42l43b
Sashiko has reviewed this patch and found no issues.
Quoted 7 lines
The newer variants requires a slightly different process for the load detection. It is no longer necessary to apply different tuning for 3 vs 4-pole headsets, but a new field does require updated for CTIA vs OMTP headsets. Update the driver to follow the correct process for this new version of the chip.
Signed-off-by Charles Keepax <[email protected]>
Sashiko has reviewed this patch and found no issues.
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2