Skip to contentSkip to conversation

media: ipu6: declare firmware files with MODULE_FIRMWARE

PATCH Sergey Lebedev 1 participant 1 message Nov 17 Media (V4L/DVB)

lore
Share & tools
lore

Sergey Lebedev

author Tested-by
#0 lore raw

Hi,

This fixes a boot failure I hit on a Surface Pro 11 (Lunar Lake, IPU7 driven by intel-ipu6, v7.4-rc1). dracut put intel-ipu6 into the initramfs without any firmware, and the probe failed there:

intel-ipu6 0000:00:05.0: error -ENOENT: Requesting signed firmware intel/ipu/ipu7_fw.bin failed intel-ipu6 0000:00:05.0: probe with driver intel-ipu6 failed with error -2

With this patch modinfo lists the eight files, dracut packs the seven present here (there is no ipu8_fw.bin), and the probe in the initramfs
succeeds: CSE authentication done, three sensors found.

Sergey