glibc: Do not use Transparent Huge Pages in malloc by default
PATCH 1/1 glibc: Do not use Transparent Huge Pages in malloc by default
From: Etienne Cordonnier <[email protected]>
Since glibc 2.43 malloc on aarch64 defaults to glibc.malloc.hugetlb=1 with a 2MB THP size, which considerably increases memory usage on embedded systems (an aarch64 system went from 465 MiB to 1105 MiB AnonPages at idle and started swapping).
The default is a compile-time constant in glibc and GLIBC_TUNABLES does not reach AT_SECURE programs. Add a configure option to glibc to disable the default and wire it up as the malloc-default-thp PACKAGECONFIG, off by default to get the pre-2.43 behavior. THP can still be enabled at run time with glibc.malloc.hugetlb=1.
Backported to wrynose (glibc 2.43): the glibc patch is the 2.43 backport of the upstream submission, using the pre-refactor malloc-hugepages.h.
[YOCTO #16490]
AI-Generated: Uses Claude Code
--- ...le-malloc-default-thp-configure-opti.patch | 189 ++++++++++++++++++ meta/recipes-core/glibc/glibc_2.43.bb | 7 + 2 files changed, 196 insertions(+) create mode 100644 meta/recipes-core/glibc/glibc/0023-malloc-Add-disable-malloc-default-thp-configure-opti.patch
meta/recipes-core/glibc/glibc/0023-malloc-Add-disable-malloc-default-thp-configure-opti.patch new file +189 -0
@@ -0,0 +1,189 @@ +From f9f37cf138a539263b48e2a6fbe53dce95fe6244 Mon Sep 17 00:00:00 2001 +From: Khem Raj <[email protected]> +Date: Sat, 14 Nov 2026 21:11:13 +0100 +Subject: [PATCH] malloc: Add --disable-malloc-default-thp configure option + +Since glibc 2.43, malloc on aarch64 defaults to glibc.malloc.hugetlb=1 +with a 2MB THP size and also applies MADV_HUGEPAGE to thread arenas. On +memory constrained embedded systems this significantly increases the +resident memory of every process (BZ #34081). + +Add a configure option, --disable-malloc-default-thp, which makes the +generic malloc-hugepages.h override any target definition of +DEFAULT_THP_PAGESIZE with 0. The aarch64 header gets an include guard +so it cannot redefine DEFAULT_THP_PAGESIZE after the generic header has +undefined it. This gives the pre-2.43 behavior (glibc.malloc.hugetlb +defaults to 0, THP can still be enabled at run time with +glibc.malloc.hugetlb=1). The default is unchanged. + +Upstream-Status: Submitted [https://github.com/kraj/glibc/commit/f42cbe83a44f816cd1780516d738a8681044e9d7] + +Backported to glibc 2.43 (pre "hugepages abstraction" refactor): the +sysdeps hunks apply to sysdeps/generic/malloc-hugepages.h and +sysdeps/unix/sysv/linux/aarch64/malloc-hugepages.h using +DEFAULT_THP_PAGESIZE instead of MALLOC_DEFAULT_THP_PAGESIZE, and the +manual/tunables.texi hunk is dropped. Functional change is identical. + +Signed-off-by: Khem Raj <[email protected]> +--- + INSTALL | 9 ++++++++ + config.h.in | 4 ++++ + configure | 21 +++++++++++++++++++ + configure.ac | 8 +++++++ + manual/install.texi | 8 +++++++ + sysdeps/generic/malloc-hugepages.h | 4 ++++ + .../sysv/linux/aarch64/malloc-hugepages.h | 7 +++++++ + 7 files changed, 61 insertions(+) + +diff --git a/INSTALL b/INSTALL +index 4174c9661fa..b1388784076 100644 +--- a/INSTALL ++++ b/INSTALL +@@ -250,6 +250,15 @@ passed to 'configure'. For example: + Disable using 'scv' instruction for syscalls. All syscalls will + use 'sc' instead, even if the kernel supports 'scv'. PowerPC only. + ++'--disable-malloc-default-thp' ++ Do not make 'malloc' use Transparent Huge Pages by default. This ++ restores the behavior of 'glibc.malloc.hugetlb=0' as the default, ++ which can reduce memory usage on systems with limited memory. Huge ++ pages can still be enabled at run time by setting the ++ 'glibc.malloc.hugetlb' tunable to '1'. This only affects targets ++ which use Transparent Huge Pages in 'malloc' by default, currently ++ AArch64. ++ + '--build=BUILD-SYSTEM' + '--host=HOST-SYSTEM' + These options are for cross-compiling. If you specify both options +diff --git a/config.h.in b/config.h.in +index 2cd8c90eb66..74b1a2824c7 100644 +--- a/config.h.in ++++ b/config.h.in +@@ -29,6 +29,10 @@ + /* On powerpc*, define if scv should be used for syscalls (when available). */ + #undef USE_PPC_SCV + ++/* Define if malloc should use Transparent Huge Pages by default on ++ targets which define DEFAULT_THP_PAGESIZE. */ ++#undef USE_MALLOC_DEFAULT_THP ++ + /* Define if _Unwind_Find_FDE should be exported from glibc. */ + #undef EXPORT_UNWIND_FIND_FDE + +diff --git a/configure b/configure +index 0cd2269859c..d4c8aee085d 100755 +--- a/configure ++++ b/configure +@@ -820,6 +820,7 @@ enable_pt_chown + enable_mathvec + enable_cet + enable_scv ++enable_malloc_default_thp + enable_fortify_source + enable_sframe + with_cpu +@@ -1503,6 +1504,10 @@ Optional Features: + (CET), x86 only + --disable-scv syscalls will not use scv instruction, even if the + kernel supports it, powerpc only ++ --disable-malloc-default-thp ++ malloc will not use Transparent Huge Pages by ++ default on targets which enable them, ++ glibc.malloc.hugetlb=1 can still enable them + --enable-fortify-source[=1|2|3] + Use -D_FORTIFY_SOURCE=[1|2|3] to control code + hardening, defaults to highest possible value +@@ -4872,6 +4877,22 @@ then : + + fi + ++# Check whether --enable-malloc-default-thp was given. ++if test ${enable_malloc_default_thp+y} ++then : ++ enableval=$enable_malloc_default_thp; use_malloc_default_thp=$enableval ++else case e in #( ++ e) use_malloc_default_thp=yes ;; ++esac ++fi ++ ++ ++if test "$use_malloc_default_thp" != "no" ++then : ++ printf "%s\n" "#define USE_MALLOC_DEFAULT_THP 1" >>confdefs.h ++ ++fi ++ + # Check whether --enable-fortify-source was given. + if test ${enable_fortify_source+y} + then : +diff --git a/configure.ac b/configure.ac +index 3e4a601c01f..941babaefd0 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -429,6 +429,14 @@ AC_ARG_ENABLE([scv], + + AS_IF([[test "$use_scv" != "no"]],[AC_DEFINE(USE_PPC_SCV)]) + ++AC_ARG_ENABLE([malloc-default-thp], ++ AS_HELP_STRING([--disable-malloc-default-thp], ++ [malloc will not use Transparent Huge Pages by default on targets which enable them, glibc.malloc.hugetlb=1 can still enable them]), ++ [use_malloc_default_thp=$enableval], ++ [use_malloc_default_thp=yes]) ++ ++AS_IF([[test "$use_malloc_default_thp" != "no"]],[AC_DEFINE(USE_MALLOC_DEFAULT_THP)]) ++ + dnl Build glibc with _FORTIFY_SOURCE + AC_ARG_ENABLE(fortify-source, + AS_HELP_STRING([--enable-fortify-source@<:@=1|2|3@:>@], +diff --git a/manual/install.texi b/manual/install.texi +index 073cda05309..0a6534e3b35 100644 +--- a/manual/install.texi ++++ b/manual/install.texi +@@ -280,6 +280,14 @@ C++ libraries. + Disable using @code{scv} instruction for syscalls. All syscalls will use + @code{sc} instead, even if the kernel supports @code{scv}. PowerPC only. + ++@item --disable-malloc-default-thp ++Do not make @code{malloc} use Transparent Huge Pages by default. This ++restores the behavior of @code{glibc.malloc.hugetlb=0} as the default, ++which can reduce memory usage on systems with limited memory. Huge pages ++can still be enabled at run time by setting the @code{glibc.malloc.hugetlb} ++tunable to @code{1}. This only affects targets which use Transparent ++Huge Pages in @code{malloc} by default, currently AArch64. ++ + @item --build=@var{build-system} + @itemx --host=@var{host-system} + These options are for cross-compiling. If you specify both options and +diff --git a/sysdeps/generic/malloc-hugepages.h b/sysdeps/generic/malloc-hugepages.h +index ab2690f7b8a..23a4cdd5bce 100644 +--- a/sysdeps/generic/malloc-hugepages.h ++++ b/sysdeps/generic/malloc-hugepages.h +@@ -41,6 +41,10 @@ enum malloc_thp_mode_t __malloc_thp_mode (void) attribute_hidden; + void __malloc_hugepage_config (size_t requested, size_t *pagesize, int *flags) + attribute_hidden; + ++#ifndef USE_MALLOC_DEFAULT_THP ++# undef DEFAULT_THP_PAGESIZE ++#endif ++ + #ifndef DEFAULT_THP_PAGESIZE + # define DEFAULT_THP_PAGESIZE 0 + #endif +diff --git a/sysdeps/unix/sysv/linux/aarch64/malloc-hugepages.h b/sysdeps/unix/sysv/linux/aarch64/malloc-hugepages.h +index 2204112e4e5..27eef7ecca6 100644 +--- a/sysdeps/unix/sysv/linux/aarch64/malloc-hugepages.h ++++ b/sysdeps/unix/sysv/linux/aarch64/malloc-hugepages.h +@@ -16,6 +16,13 @@ + License along with the GNU C Library; see the file COPYING.LIB. If + not, see <https://www.gnu.org/licenses/>. */ + ++#ifndef _LINUX_AARCH64_MALLOC_HUGEPAGES_H ++#define _LINUX_AARCH64_MALLOC_HUGEPAGES_H ++ ++/* Only define this on the first inclusion, the generic malloc-hugepages.h may ++ undefine it if glibc is configured with --disable-malloc-default-thp. */ + #define DEFAULT_THP_PAGESIZE (1UL << 21) + + #include_next <malloc-hugepages.h> ++ ++#endif
meta/recipes-core/glibc/glibc_2.43.bb +7 -0
@@ -60,6 +60,7 @@ SRC_URI = "${GLIBC_GIT_URI};branch=${SRCBRANCH};name=glibc \ file://0020-fix-create-thread-failed-in-unprivileged-process-BZ-.patch \ file://0021-tests-Skip-2-qemu-tests-that-can-hang-in-oe-selftest.patch \ file://0022-Propagate-ffile-prefix-map-from-CFLAGS-to-ASFLAGS.patch \ + file://0023-malloc-Add-disable-malloc-default-thp-configure-opti.patch \ " B = "${WORKDIR}/build-${TARGET_SYS}"
@@ -97,6 +98,12 @@ PACKAGECONFIG ??= "nscd memory-tagging" PACKAGECONFIG[nscd] = "--enable-nscd,--disable-nscd" PACKAGECONFIG[memory-tagging] = "--enable-memory-tagging,--disable-memory-tagging" +# Since glibc 2.43 malloc defaults to 2MB Transparent Huge Pages on aarch64, +# which considerably increases memory usage on embedded systems +# (https://bugzilla.yoctoproject.org/show_bug.cgi?id=16490). Keep it disabled +# by default, THP can still be enabled at run time with glibc.malloc.hugetlb=1 +PACKAGECONFIG[malloc-default-thp] = "--enable-malloc-default-thp,--disable-malloc-default-thp" + do_patch:append() { bb.build.exec_func('do_fix_readlib_c', d) }
Signature · 1 line
2.43.0