Skip to contentSkip to conversation

Resize

BACKING DEVICE Giuseppe Della Bianca 1 participant 1 message May 1, 2021 bcache (block layer cache)

lore
Share & tools
lore
#0 lore raw

Hi.

This is the procedure I used for resize one backing device with btrfs filesystem from 1 to 10 GB.

The technique used is
- Move the start of the partition forward (offset 8192) and set the partition type.
- Perform the resize.
- Move back the beginning of the partition and reset the partition type.

Backup data!!

The backing device /dev/sdc7 is a last logical partition with btrfs filesystem.

Stopping bcacheX device and/or unregister /dev/sdc7 backing device. With bcache show verify that the device is no longer in use.

parted /dev/sdc unit B print
7 574412029952B 575491014655B logical

bd 0 574412029952B 575491014655B logical
fs 8192 574412038144B 575491014655B logical btrfs

parted /dev/sdc
unit B
print
rm 7
mkpart logical btrfs 574412038144B 575491014655B
quit

reboot

gparted resize partition

parted /dev/sdc unit B print
7 574412038144B 585151545343B logical btrfs

fs 8192 574412038144B 585151545343B logical btrfs
bd 0 574412029952B 585151545343B logical

parted /dev/sdc
unit B
print
rm 7
mkpart logical 574412029952B 585151545343B
quit

gdb