Skip to contentSkip to conversation

please add support for Asus PCE-N53 (0x1814, 0x5592)

NETWORKING DRIVERS RT2X00 Treeve Jelbert 1 participant 1 message Jul 23, 2013

lore
Share & tools
lore
#0 lore raw

linux-3.10.0 does not support device (0x1814, 0x5592) Asus PCE-N53 which I would like to use on with 5GHz network.

#lspci
02:00.0 Network controller: Ralink corp. Device 5592
Subsystem: ASUSTeK Computer Inc. Device 851a

# lspci -d :5592 -nn
02:00.0 Network controller [0280]: Ralink corp. Device [1814:5592]

#modprobe rt2x00pci

[ 2724.173984] cfg80211: Calling CRDA to update world regulatory domain

device id (0x1814, 0x5592) 'Asus PCE-N53' not present in rt2800pci.c

After adding this device id , it get the following messages

[    8.993741] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading 
firmware file 'rt2860.bin'
[    8.994857] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware 
detected - version: 0.34
[    9.073053] NET: Registered protocol family 17
[   10.438586] ieee80211 phy0: rt2x00lib_rxdone_read_signal: Warning - Frame 
received with unrecognized signal, mode=0x0000, signal=0x0000, type=4
[   69.171225] ieee80211 phy0: rt2x00lib_rxdone: Error - Wrong frame size 0

max 3840

#lsmod

rt2800pci               9514  0 
eeprom_93cx6            1913  1 rt2800pci
rt2x00pci               2368  1 rt2800pci
rt2800lib              52747  1 rt2800pci
crc_ccitt               1235  1 rt2800lib
rt2x00mmio              2425  1 rt2800pci
rt2x00lib              30593  4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio
led_class               2531  1 rt2x00lib
mac80211              209216  3 rt2x00lib,rt2x00pci,rt2800lib

#ifconfig
wlan0 Link encap:Ethernet HWaddr 30:85:A9:F4:B6:61
UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)