Skip to contentSkip to conversation

boot linux kernel from NAND

U-Boot roundrobin 3 participants 4 messages Jan 21, 2009 – Jan 22, 2009

lore
Share & tools
lore

roundrobin

author
#0 lore raw

Hi

We have a custom board where we are using u-boot to boot linux kernel from NOR flash. This is working alright.

However, we are planning to replace the NOR flash with NAND flash. There will be no NOR flash on the board. So I need to boot linux kernel from NAND.

My question is what works do I need to do so that u-boot can boot linux from NAND? Do I need to implement something like a NAND driver for u-boot, or do I just need to modify some u-boot configurations?

By the way, I am talking about booting linux kernel, not u-boot itself. u-boot itself will be loaded from NAND and kicked by using a feature of the board which I am not clear at the moment.

Many thanks in advance for any info on this.

Best regards
Round Robin

Signature · 2 lines
View this message in context: http://www.nabble.com/boot-linux-kernel-from-NAND-tp21579236p21579236.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw
Quoted 9 lines · roundrobin

Hi

We have a custom board where we are using u-boot to boot linux kernel from NOR flash. This is working alright.

However, we are planning to replace the NOR flash with NAND flash. There will be no NOR flash on the board. So I need to boot linux kernel from NAND.

I use the command:

nboot.i 20000000 primary

primary is in my mtdparts environment variable:

mtdparts=nand:7m at 0m(primary),7m at 7m(secondary,2m at 14m(config)

mtdids is
nand0=nand

partition is
nand0,0

Quoted 4 lines

My question is what works do I need to do so that u-boot can boot linux from NAND? Do I need to implement something like a NAND driver for u-boot, or do I just need to modify some u-boot configurations?

You're going to have to configure your nand flash in your board config file. I believe there are sufficient examples for you to read.

Quoted 21 lines

By the way, I am talking about booting linux kernel, not u-boot itself. u-boot itself will be loaded from NAND and kicked by using a feature of the board which I am not clear at the moment.

Many thanks in advance for any info on this.

Best regards
Round Robin

--
View this message in context:
http://www.nabble.com/boot-linux-kernel-from-NAND-tp21579236p21579236.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

author
#2 lore raw

Thanks a lot for the reply.

What I understand from the reply is I need to change my bootcmd environment variable. Currently for loading kernel from NOR, it uses bootm command; now I have to change it to nboot command.
Also I understand that I do not need to write a NAND driver for this purpose.

Please confirm if my understanding is correct.

By the way, what is the purpose of the code in nand_spl directory?

Quoted 66 lines · Matt Gessner-2 wrote:
Quoted 10 lines

Hi

We have a custom board where we are using u-boot to boot linux kernel from NOR flash. This is working alright.

However, we are planning to replace the NOR flash with NAND flash. There will be no NOR flash on the board. So I need to boot linux kernel from NAND.

I use the command:

   nboot.i 20000000 primary

primary is in my mtdparts environment variable:

mtdparts=nand:7m at 0m(primary),7m at 7m(secondary,2m at 14m(config)

mtdids is
nand0=nand

partition is
nand0,0

Quoted 4 lines

My question is what works do I need to do so that u-boot can boot linux from NAND? Do I need to implement something like a NAND driver for u-boot, or do I just need to modify some u-boot configurations?

You're going to have to configure your nand flash in your board config file. I believe there are sufficient examples for you to read.

Quoted 16 lines

By the way, I am talking about booting linux kernel, not u-boot itself. u-boot itself will be loaded from NAND and kicked by using a feature of the board which I am not clear at the moment.

Many thanks in advance for any info on this.

Best regards
Round Robin

--
View this message in context:
http://www.nabble.com/boot-linux-kernel-from-NAND-tp21579236p21579236.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

Quoted 5 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 2 lines
View this message in context: http://www.nabble.com/boot-linux-kernel-from-NAND-tp21579236p21593758.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#3 lore raw
Quoted 19 lines

-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of roundrobin
Sent: Thursday, January 22, 2009 7:54 AM
To: u-boot at lists.denx.de
Subject: Re: [U-Boot] boot linux kernel from NAND

Thanks a lot for the reply.

What I understand from the reply is I need to change my bootcmd environment variable. Currently for loading kernel from NOR, it uses bootm command; now I have to change it to nboot command.
Also I understand that I do not need to write a NAND driver for this purpose.

Quoted 3 lines

Please confirm if my understanding is correct.

By the way, what is the purpose of the code in nand_spl directory?

This is the code required when your u-boot is on NAND and you would like to boot from NAND.
This is the first 4K code which would be read by the SOC after reset from the NAND device into an internal buffer.

Quoted 2 lines

/lists.denx.de/mailman/listinfo/u-boot

Quoted 15 lines
Quoted 2 lines

--
View this message in context:
http://www.nabble.com/boot-linux-kernel-from-NAND-tp21579236p2
1593758.html
Sent from the Uboot - Users mailing list archive at Nabble.com.

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot