Skip to contentSkip to conversation

my u-boot freezing at Uncompress Linux...

U-Boot SlinceArm 2 participants 4 messages May 19, 2009 – May 22, 2009

lore
Share & tools
lore

SlinceArm

author
#0 lore raw

Hi. dear all

my u-boot-2008.03 use tftp download my kernel ,

but my u-boot was frezzing at Uncompressing Linux ...

and show nothing anymore in my console

i try another way to start my kernel : nfs , but there is the same issue in my u-boot .

//here are is u-boot information in my console

TFTP from server 192.168.1.3; our IP address is 192.168.1.8 Filename 'uImage'.
Load address: 0x31000000
Loading: #################################################################

         ###############################                                        
done                                                                            
Bytes transferred = 1403736 (156b58 hex)                                        
## Booting kernel from Legacy Image at 31000000 ...                             
   Image Name:   slincearm_bootloader                                           
   Created:      2009-05-19   5:11:32 UTC                                       
   Image Type:   ARM Linux Kernel Image (uncompressed)                          
   Data Size:    1403672 Bytes =  1.3 MB                                        

Load Address: 31000000
Entry Point: 31000040
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................

Signature · 2 lines
View this message in context: http://www.nabble.com/my-u-boot-freezing-at-Uncompress-Linux...-tp23610073p23610073.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw

Hi SlinceArm,

Quoted 3 lines

my u-boot-2008.03 use tftp download my kernel ,

but my u-boot was frezzing at Uncompressing Linux ...

I doubt that. Actually your Linux kernel freezes - U-Boots last message is the "Starting kernel .." message. It's all Linux from there.

So start troubleshooting your kernel. Searching the archieve for this mailing list will probably be a good start point.

Cheers
Detlev

Signature · 6 lines
"Win32 sucks so hard it could pull matter out of a Black Hole."
                                          -- Pohl Longsine
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
author
#2 lore raw
Quoted 5 lines

I doubt that. Actually your Linux kernel freezes - U-Boots last message is the "Starting kernel .." message. It's all Linux from there. So start troubleshooting your kernel. Searching the archieve for this mailing list will probably be a good start point.

thanks for your reply , Detlev : )

i rebuild a new kernel-2.6.24 and my console freezes at "Starting kernel..."
and i will search this issue in forum .

but i still confuse
in my case , it mean my u-boot setting is "correct" and my kernel cause this issue ??

Signature · 2 lines
View this message in context: http://www.nabble.com/-U-boot-my-u-boot-freezing-at-Uncompress-Linux...-tp23610073p23650633.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#3 lore raw

Hi SlinceArm,

Quoted 2 lines

i rebuild a new kernel-2.6.24 and my console freezes at "Starting kernel..." and i will search this issue in forum .

Good luck.

Quoted 2 lines

but i still confuse in my case , it mean my u-boot setting is "correct" and my kernel cause this issue ??

I'm not sure what you mean by "U-Boot settings", but as you can see, U-Boot loads a kernel and transfers control to it, so I don't know what should be wrong in U-Boot _itself_.

Of course on the other hand, U-Boot transfers a commandline (bootargs) and the mystical a-tags to a Linuxkernel which interprets them, so this is also something you should check.

Cheers
Detlev

Signature · 6 lines
Bacchus, n. A convenient deity invented by the ancients as an excuse for
getting drunk.
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de