Kernel Version Dependency in BB Recipe
Hello Yocto Community, I did a search and found a great deal about layer dependencies, but I am still not clear on how or if it is possible to add a kernel version dependency to a BB recipe. I would like to bitbake to report an error if it attempts to build my custom package with an unsupported version of Linux. Thank you and best regards,Andres
To Specify the Linux Kernel Local Path In SRC_URI
Hi,
I am trying to build kernel image for new hardware.
So, I prefer to use my linux 3.x version with specific changes.
I want bitbake to fetch the local path of my linux.
Is it possible to specify the local path in SRC_URI.
Thanks and Regards,
Yukatharsani J.
________________________________
From: [email protected] <[email protected]> on behalf of Andres Sagot <[email protected]>
Sent: Thursday, October 29, 2015 9:49 AM
To: [email protected]
Subject: [yocto] Kernel Version Dependency in BB Recipe
Hello Yocto Community,
I did a search and found a great deal about layer dependencies, but I am still not clear on how or if it is possible to add a kernel version dependency to a BB recipe. I would like to bitbake to report an error if it attempts to build my custom package with an unsupported version of Linux.
Thank you and best regards,
Andres
Re: To Specify the Linux Kernel Local Path In SRC_URI
Quoted 9 lines · YUKATHARSANI JEYACHANDRA
Hi,
I am trying to build kernel image for new hardware.
So, I prefer to use my linux 3.x version with specific changes.
I want bitbake to fetch the local path of my linux.
Is it possible to specify the local path in
SRC_URI.
yes. use file:///path/to/linux.tar or even you can use externalsrc and point it to your tree during development.
read through
http://www.yoctoproject.org/docs/1.8/dev-manual/dev-manual.html#building-software-from-an-external-source
Quoted 33 lines
Thanks and Regards,
Yukatharsani J.
________________________________
From: [email protected] <[email protected]> on behalf of Andres Sagot <[email protected]>
Sent: Thursday, October 29, 2015 9:49 AM
To: [email protected]
Subject: [yocto] Kernel Version Dependency in BB RecipeHello Yocto Community,
I did a search and found a great deal about layer dependencies, but I am still not clear on how or if it is possible to add a kernel version dependency to a BB recipe. I would like to bitbake to report an error if it attempts to build my custom package with an unsupported version of Linux.
Thank you and best regards,
Andres--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Re: To Specify the Linux Kernel Local Path In SRC_URI
Thank you khem..It worked.
Quoted 50 lines · Khem Raj
Quoted 9 lines · YUKATHARSANI JEYACHANDRA
Hi,
I am trying to build kernel image for new hardware.
So, I prefer to use my linux 3.x version with specific changes.
I want bitbake to fetch the local path of my linux.
Is it possible to specify the local path in
SRC_URI.yes. use file:///path/to/linux.tar or even you can use externalsrc and point it to your tree during development.
read through
http://www.yoctoproject.org/docs/1.8/dev-manual/dev-manual.html#building-software-from-an-external-sourceQuoted 23 lines
Thanks and Regards,
Yukatharsani J.
________________________________
From: [email protected] <[email protected]> on behalf of Andres Sagot <[email protected]>
Sent: Thursday, October 29, 2015 9:49 AM
To: [email protected]
Subject: [yocto] Kernel Version Dependency in BB RecipeHello Yocto Community,
I did a search and found a great deal about layer dependencies, but I am still not clear on how or if it is possible to add a kernel version dependency to a BB recipe. I would like to bitbake to report an error if it attempts to build my custom package with an unsupported version of Linux.
Quoted 9 lines
Thank you and best regards,
Andres--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto.
To Customize the toolchain path in meta-bsp layer
In reply to Khem RajHi All,
I am trying to build my meta-bsp layer using external linaro
toolchain path.
But i am getting some issues since i set EXTERNAL_TOOLCHAIN
path in local.conf file.
Is there any way to customize my meta layer alone to take
external linaro tool chain not other general meta layers.
Thanks and Regards,
Yukatharsani J.
Quoted 50 lines · Khem Raj
Quoted 9 lines · YUKATHARSANI JEYACHANDRA
Hi,
I am trying to build kernel image for new hardware.
So, I prefer to use my linux 3.x version with specific changes.
I want bitbake to fetch the local path of my linux.
Is it possible to specify the local path in
SRC_URI.yes. use file:///path/to/linux.tar or even you can use externalsrc and point it to your tree during development.
read through
http://www.yoctoproject.org/docs/1.8/dev-manual/dev-manual.html#building-software-from-an-external-sourceQuoted 23 lines
Thanks and Regards,
Yukatharsani J.
________________________________
From: [email protected] <[email protected]> on behalf of Andres Sagot <[email protected]>
Sent: Thursday, October 29, 2015 9:49 AM
To: [email protected]
Subject: [yocto] Kernel Version Dependency in BB RecipeHello Yocto Community,
I did a search and found a great deal about layer dependencies, but I am still not clear on how or if it is possible to add a kernel version dependency to a BB recipe. I would like to bitbake to report an error if it attempts to build my custom package with an unsupported version of Linux.
Quoted 9 lines
Thank you and best regards,
Andres--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto.
Re: Computing transaction Error
Hi All,
I am getting the following error while running my bsp image.
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...error: Can't install packagegroup-mrvl-bsp-1.0-r17.1@bg4ct: no package provides amp
Any idea what might go wrong ?
Thanks and Regards,
Yukatharsani J.
Quoted 66 lines · Yukatharsani Jeyachandra
Hi All,
I am trying to build my meta-bsp layer using external linaro
toolchain path.
But i am getting some issues since i setEXTERNAL_TOOLCHAIN
path in local.conf file.
Is there any way to customize my meta layer alone to take
external linaro tool chain not other general meta layers.Thanks and Regards,
Yukatharsani J.Quoted 51 lines · Khem Raj
Quoted 9 lines · YUKATHARSANI JEYACHANDRA
Hi,
I am trying to build kernel image for new hardware.
So, I prefer to use my linux 3.x version with specific changes.
I want bitbake to fetch the local path of my linux.
Is it possible to specify the local path in
SRC_URI.yes. use file:///path/to/linux.tar or even you can use externalsrc and point it to your tree during development.
read through
http://www.yoctoproject.org/docs/1.8/dev-manual/dev-manual.html#building-software-from-an-external-sourceQuoted 18 lines
Thanks and Regards,
Yukatharsani J.
________________________________
From: [email protected] <[email protected]> on behalf of Andres Sagot <[email protected]>
Sent: Thursday, October 29, 2015 9:49 AM
To: [email protected]
Subject: [yocto] Kernel Version Dependency in BB RecipeHello Yocto Community,
Quoted 14 lines
I did a search and found a great deal about layer dependencies, but I am still not clear on how or if it is possible to add a kernel version dependency to a BB recipe. I would like to bitbake to report an error if it attempts to build my custom package with an unsupported version of Linux.
Thank you and best regards,
AndresSignature · 4 lines
_______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto.
Re: Computing transaction Error
Quoted 13 lines · Yukatharsani Jeyachandra
Hi All,
I am getting the following error while running my bsp image.
Loading cache...
Updating cache... ######################################## [100%]Computing transaction...error: Can't install packagegroup-mrvl-bsp-1.0-r17.1@bg4ct: no package provides amp
Any idea what might go wrong ?
you have a package called amp which is actually empty so it gets removed from final package list but the package group still has the depepndency so you can use ALLOW_EMPTY in amp recipe or your run time dependency in package group is wrong it should probably be some other package coming out of same recipe thats building amp. May be a library
Quoted 73 lines
Thanks and Regards,
Yukatharsani J.Quoted 6 lines · Yukatharsani Jeyachandra
Hi All,
I am trying to build my meta-bsp layer using external linaro toolchain path.
But i am getting some issues since i setEXTERNAL_TOOLCHAINpath in local.conf file.
Is there any way to customize my meta layer alone to take external linaro tool chain not other general meta layers.Quoted 56 lines
Thanks and Regards,
Yukatharsani J.Quoted 50 lines · Khem Raj
Quoted 9 lines · YUKATHARSANI JEYACHANDRA
Hi,
I am trying to build kernel image for new hardware.
So, I prefer to use my linux 3.x version with specific changes.
I want bitbake to fetch the local path of my linux.
Is it possible to specify the local path in
SRC_URI.yes. use file:///path/to/linux.tar or even you can use externalsrc and point it to your tree during development.
read through
http://www.yoctoproject.org/docs/1.8/dev-manual/dev-manual.html#building-software-from-an-external-sourceQuoted 23 lines
Thanks and Regards,
Yukatharsani J.
________________________________
From: [email protected] <[email protected]> on behalf of Andres Sagot <[email protected]>
Sent: Thursday, October 29, 2015 9:49 AM
To: [email protected]
Subject: [yocto] Kernel Version Dependency in BB RecipeHello Yocto Community,
I did a search and found a great deal about layer dependencies, but I am still not clear on how or if it is possible to add a kernel version dependency to a BB recipe. I would like to bitbake to report an error if it attempts to build my custom package with an unsupported version of Linux.
Quoted 9 lines
Thank you and best regards,
Andres--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto.
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto