Skip to contentSkip to conversation

Exposing the same VG from two different disks

linux-lvm [email protected] 3 participants 3 messages Jun 5, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

I'm not sure if what I'm trying to do is possible or not but hopefully someone out there can help!!

I have a volume group which consists of a LUN (/dev/emcpowerv1) in an EMC cabinet. To backup up the disk I use EMC technology to synchronise a second LUN (/dev/emcpoweraf1) with the first, when the synchronisation is complete I then break the connection. At this point I have two identical volume groups exposed to the same host. What I would like to do is rename the second volume group and mount its logical volumes. However I can't because (understandably) LVM doesn't like having two identical volume groups so when I issue pvchange -u I get...

# pvchange -u /dev/emcpoweraf1
  Found duplicate PV dXiYI6nVqu8UpXO2mlaWiKKPKSBPrRbn: using /dev/emcpowerv1 not /dev/emcpoweraf1
  get_pv_from_vg_by_id: vg_read failed to read VG !
  /dev/emcpowerv1: write failed after 0 of 4096 at 4096: Operation not permitted
  pv_write with new uuid failed for /dev/emcpowerv1.
  0 physical volumes changed / 1 physical volume not changed

Notice I issue the command against /dev/emcpoweraf1 but it complains about writing to /dev/emcpowerv1.

does anyone have any ideas?
Thanks in advance
Liam

#1 lore raw
Quoted 16 lines · On Fri, 2009-06-05 at 15:18 +0200, [email protected] wrote:

Hi,

I'm not sure if what I'm trying to do is possible or not but hopefully
someone out there can help!!

I have a volume group which consists of a LUN (/dev/emcpowerv1) in an
EMC cabinet. To backup up the disk I use EMC technology to synchronise a second LUN (/dev/emcpoweraf1) with the first, when the synchronisation is complete I then break the connection. At this point I have two identical volume groups exposed to the same host. What I would like to do is rename the second volume group and mount its logical volumes. However I can't because (understandably) LVM doesn't like having two identical volume groups so when I issue pvchange -u I get...

Quoted 8 lines
# pvchange -u /dev/emcpoweraf1
  Found duplicate PV dXiYI6nVqu8UpXO2mlaWiKKPKSBPrRbn: using /dev/emcpowerv1 not /dev/emcpoweraf1
  get_pv_from_vg_by_id: vg_read failed to read VG !
  /dev/emcpowerv1: write failed after 0 of 4096 at 4096: Operation not permitted
  pv_write with new uuid failed for /dev/emcpowerv1.
  0 physical volumes changed / 1 physical volume not changed

Notice I issue the command against /dev/emcpoweraf1 but it complains about writing to /dev/emcpowerv1.

Take a look at the vgimportclone script posted to the lvm-devel list last month:

http://www.redhat.com/archives/lvm-devel/2009-May/msg00130.html

Regards,
Bryn.

#2 lore raw
In reply to [email protected]
Quoted 8 lines · On Fri, 5 Jun 2009, [email protected] wrote:

I have a volume group which consists of a LUN (/dev/emcpowerv1) in an EMC cabinet. To backup up the disk I use EMC technology to synchronise a second LUN (/dev/emcpoweraf1) with the first, when the synchronisation is complete I then break the connection. At this point I have two identical volume groups exposed to the same host. What I would like to do is rename the second volume group and mount its logical volumes. However I can't because (understandably) LVM doesn't like having two identical volume groups so when I issue pvchange -u I get...

This is doable but tricky. Please read back a few weeks in the archives to find a script that is being polished to automate this. I forget the name of the person who did the script, but when you find the posts, give him a big thank you. Test the script carefully in your situation and report here.

Signature · 4 lines
	      Stuart D. Gathman <[email protected]>
    Business Management Systems Inc.  Phone: 703 591-0911 Fax: 703 591-6154
"Confutatis maledictis, flammis acribus addictis" - background song for
a Microsoft sponsored "Where do you want to go from here?" commercial.