SD card image fails for IMX7
Hello,
I am using Yocto based build system for my project. The Yocto version used in pyro.( BB_VERSION = "1.34.0").
I am trying to build an SD card image by setting the,
IMAGE_FSTYPES = "sdcard" and also set the SDCARD_GENERATION_COMMAND = "generate_imx_sdcard" .
After trying to build the image , I am seeing the following error messages,
| NOTE: libpthread-stubs-native exists in sysroot, skipping | DEBUG: Python function extend_recipe_sysroot finished | DEBUG: Executing shell function do_image_sdcard | 0+0 records in | 0+0 records out | 0 bytes copied, 0.000164164 s, 0.0 kB/s | Model: (file) | Disk /home/evk1206/Projects/test/build/tmp/work/cl_som_imx7-fsl-linux-gnueabi/iot-eval-image/1.0-r0/deploy-iot-eval-image-image-complete/iot-eval-image-cl-som-imx7-20170912065601.rootfs.sdcard: 1057MB | Sector size (logical/physical): 512B/512B | Partition Table: msdos | Disk Flags: | | Number Start End Size Type File system Flags | 1 4194kB 12.6MB 8389kB primary lba | 2 12.6MB 1053MB 1040MB primary | | 846+0 records in | 846+0 records out | 433152 bytes (433 kB, 423 KiB) copied, 0.00094238 s, 460 MB/s | mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows | mkfs.fat 4.1 (2017-01-24) | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_image_sdcard (log file is located at /home/evk1206/Projects/test/build/tmp/work/cl_som_imx7-fsl-linux-gnueabi/iot-eval-image/1.0-r0/temp/log.do_image_sdcard.28053)
ERROR: Task (/home/evk1206/Projects/test/sources/meta-alen/recipes-core/images/iot-eval-image.bb:do_image_sdcard) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3415 tasks of which 3407 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/evk1206/Projects/test/sources/meta-alen/recipes-core/images/iot-eval-image.bb:do_image_sdcard
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
May I know how to fix this issue.
Mit freundlichen Grüßen / Best regards
Vinothkumar Eswaran
BEG-PT/PJ-EL
Quoted 3 lines · Eswaran Vinothkumar (BEG/PJ-IOT-EL)
Hello,
Hi,
Quoted 7 lines
I am using Yocto based build system for my project. The Yocto version used in pyro.(
BB_VERSION= "1.34.0").I am trying to build an SD card image by setting the,
IMAGE_FSTYPES= "sdcard" and also set theSDCARD_GENERATION_COMMAND= "generate_imx_sdcard" .
I don't know what's the current state of sdcard generation bbclass. However, I can assure you that it is not the most comofrtable
way of disk image generation. I would encourage you to switch to wic tool already instead (especially if you are using pyro revision). An example wks file for i.MX SoC family can be found at: http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-arm/tree/scripts/lib/image/canned-wks/imx-uboot-spl.wks
To enable it, you would need to add following lines to machine configuration file:
WKS_FILES = "imx-uboot-spl.wks"IMAGE_DEPENDS_wic_append = " virtual/bootloader"IMAGE_FSTYPES = "wic"
Quoted 69 lines
After trying to build the image , I am seeing the following error messages,
| NOTE: libpthread-stubs-native exists in sysroot, skipping
| DEBUG: Python function
extend_recipe_sysrootfinished| DEBUG: Executing shell function
do_image_sdcard| 0+0 records in
| 0+0 records out
| 0 bytes copied, 0.000164164 s, 0.0 kB/s
| Model: (file)
| Disk
/home/evk1206/Projects/test/build/tmp/work/cl_som_imx7-fsl-linux-gnueabi/iot-eval-image/1.0-r0/deploy-iot-eval-image-image-complete/iot-eval-image-cl-som-imx7-20170912065601.rootfs.sdcard: 1057MB| Sector size (logical/physical): 512B/512B
| Partition Table: msdos
| Disk Flags:
|
| Number Start End Size Type File system Flags
| 1 4194kB 12.6MB 8389kB primary lba
| 2 12.6MB 1053MB 1040MB primary
|
| 846+0 records in
| 846+0 records out
| 433152 bytes (433 kB, 423 KiB) copied, 0.00094238 s, 460 MB/s
| mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
| mkfs.fat 4.1 (2017-01-24)
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed:
do_image_sdcard(log file is located at/home/evk1206/Projects/test/build/tmp/work/cl_som_imx7-fsl-linux-gnueabi/iot-eval-image/1.0-r0/temp/log.do_image_sdcard.28053)ERROR: Task (/home/evk1206/Projects/test/sources/meta-alen/recipes-core/images/iot-eval-image.bb:do_image_sdcard) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3415 tasks of which 3407 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/home/evk1206/Projects/test/sources/meta-alen/recipes-core/images/iot-eval-image.bb:do_image_sdcard
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
May I know how to fix this issue.
Mit freundlichen Grüßen / Best regards
*Vinothkumar Eswaran
BEG-PT/PJ-EL*
Signature · 3 lines
Maciej Pijanowski Embedded Systems Engineer http://3mdeb.com | @3mdeb_com