Gadmei 380 on kernel 2.6.28.4
I did a dmesg, include please find the output. If you see carefully, towards the end, there is a USB driver error, and my KINGSTON usb thumb drive get disconnected and reconnected again.
Quoted 22 lines · mctiew
From: mctiew <[email protected]>
Subject: Gadmei 380 on kernel 2.6.28.4
To: [email protected]
Date: Monday, October 12, 2009, 3:32 AMI am trying to use the gadmei 380 which I bought
yesterday.I am using kernel 2.6.28.4, I downloaded the entire ~dougsland/em28xx
and did a make and install. Everything went on smoothly. However,
when I plug in the gadmei 380 usb device, it seems the driver can
get loaded by the usb pnp, but at the same time, one of my usb
pendrive will get disconnected. Because that's my boot drive
( I boot off from the usb drive ), that will cause problem with
my system.
Quoted 3 lines
Anyone has experienced this before ?
usb 1-7: new high speed USB device using ehci_hcd and address 5
[ 484.264787] usb 1-7: configuration #1 chosen from 1 choice [ 484.267538] usb 1-7: New USB device found, idVendor=eb1a, idProduct=2861 [ 484.267545] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 484.267551] usb 1-7: Product: USB 2861 Device [ 485.001090] Linux video capture interface: v2.00 [ 485.059674] em28xx: New device USB 2861 Device @ 480 Mbps (eb1a:2861, interface 0, class 0) [ 485.059780] em28xx #0: chip ID is em2860 [ 485.176408] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 61 28 50 00 5c 03 6a 22 00 00 [ 485.176431] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 03 00 00 00 00 00 00 00 00 00 00 [ 485.176451] em28xx #0: i2c eeprom 20: 06 00 01 01 f0 10 01 00 4a 00 00 00 5b 00 00 00 [ 485.176471] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 03 01 00 00 00 00 [ 485.176491] em28xx #0: i2c eeprom 40: 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.176510] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.176529] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 485.176549] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 36 00 31 00 20 00 44 00 [ 485.176568] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 485.176587] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.176606] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.177519] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.177540] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.177559] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.177578] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.177597] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 485.177620] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2afc718a [ 485.177624] em28xx #0: EEPROM info: [ 485.177627] em28xx #0: AC97 audio (5 sample rates) [ 485.177631] em28xx #0: 500mA max power [ 485.177635] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 [ 485.187906] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1) [ 485.202408] em28xx #0: found i2c device @ 0x4a [saa7113h] [ 485.219408] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 485.219913] em28xx #0: found i2c device @ 0xa2 [???] [ 485.226031] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [ 485.237534] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 485.237542] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 485.237546] em28xx #0: Please send an email with this log to: [ 485.237550] em28xx #0: V4L Mailing List <[email protected]> [ 485.237555] em28xx #0: Board eeprom hash is 0x2afc718a [ 485.237559] em28xx #0: Board i2c devicelist hash is 0x6b950080 [ 485.237564] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 485.237569] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 485.237574] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 485.237579] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 485.237583] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 485.237588] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 485.237592] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 485.237597] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 485.237601] em28xx #0: card=7 -> Leadtek Winfast USB II [ 485.237606] em28xx #0: card=8 -> Kworld USB2800 [ 485.237610] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 [ 485.237617] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 485.237621] em28xx #0: card=11 -> Terratec Hybrid XS [ 485.237626] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 485.237630] em28xx #0: card=13 -> Terratec Prodigy XS [ 485.237635] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 485.237640] em28xx #0: card=15 -> V-Gear PocketTV [ 485.237644] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 485.237649] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 485.237654] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 485.237658] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 485.237663] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 485.237668] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 485.237673] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 485.237677] em28xx #0: card=23 -> Huaqi DLCW-130 [ 485.237682] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 485.237686] em28xx #0: card=25 -> Gadmei UTV310 [ 485.237691] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 485.237695] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 485.237700] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 485.237705] em28xx #0: card=29 -> <NULL> [ 485.237709] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 485.237714] em28xx #0: card=31 -> Usbgear VD204v9 [ 485.237718] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 485.237722] em28xx #0: card=33 -> <NULL> [ 485.237726] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 485.237731] em28xx #0: card=35 -> Typhoon DVD Maker [ 485.237735] em28xx #0: card=36 -> NetGMBH Cam [ 485.237740] em28xx #0: card=37 -> Gadmei UTV330 [ 485.237744] em28xx #0: card=38 -> Yakumo MovieMixer [ 485.237748] em28xx #0: card=39 -> KWorld PVRTV 300U [ 485.237753] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 485.237757] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 485.237762] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 485.237766] em28xx #0: card=43 -> Terratec Cinergy T XS [ 485.237771] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 485.237775] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 485.237780] em28xx #0: card=46 -> Compro, VideoMate U3 [ 485.237784] em28xx #0: card=47 -> KWorld DVB-T 305U [ 485.237789] em28xx #0: card=48 -> KWorld DVB-T 310U [ 485.237793] em28xx #0: card=49 -> MSI DigiVox A/D [ 485.237797] em28xx #0: card=50 -> MSI DigiVox A/D II [ 485.237802] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 485.237806] em28xx #0: card=52 -> DNT DA2 Hybrid [ 485.237811] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 485.237815] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 485.237820] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 485.237825] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 485.237829] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 485.237834] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 485.237838] em28xx #0: card=59 -> <NULL> [ 485.237842] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 485.237847] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 485.237851] em28xx #0: card=62 -> Gadmei TVR200 [ 485.237856] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 485.237860] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 485.237864] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 485.237869] em28xx #0: card=66 -> Empire dual TV [ 485.237873] em28xx #0: card=67 -> Terratec Grabby [ 485.237877] em28xx #0: card=68 -> Terratec AV350 [ 485.237882] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 485.237886] em28xx #0: card=70 -> Evga inDtube [ 485.237890] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 485.237895] em28xx #0: card=72 -> Gadmei UTV330+ [ 485.237899] em28xx #0: card=73 -> Reddo DVB-C USB TV Box [ 485.238028] em28xx #0: Config register raw data: 0x50 [ 485.256925] em28xx #0: AC97 vendor ID = 0xf752f752 [ 485.266907] em28xx #0: AC97 features = 0xf752 [ 485.266913] em28xx #0: Unknown AC97 audio processor detected! [ 485.613372] em28xx #0: v4l2 driver version 0.1.2 [ 486.363402] usb 1-5: reset high speed USB device using ehci_hcd and address 2 [ 486.390369] em28xx #0: V4L2 video device registered as /dev/video0 [ 486.390376] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 486.390402] em28xx audio device (eb1a:2861): interface 1, class 1 [ 486.390423] em28xx audio device (eb1a:2861): interface 2, class 1 [ 486.390457] usbcore: registered new interface driver em28xx [ 486.390463] em28xx driver loaded [ 486.469602] usbcore: registered new interface driver snd-usb-audio [ 486.522649] usb 1-5: failed to restore interface 0 altsetting 0 (error=-71) [ 486.522679] usb 1-5: USB disconnect, address 2 [ 486.522933] sd 2:0:0:0: [sdb] READ CAPACITY failed [ 486.522935] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 486.522940] sd 2:0:0:0: [sdb] Sense not available. [ 486.522986] sd 2:0:0:0: [sdb] Write Protect is off [ 486.522989] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 486.522991] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 486.633333] usb 1-5: new high speed USB device using ehci_hcd and address 6 [ 486.811455] usb 1-5: configuration #1 chosen from 1 choice [ 486.818131] scsi3 : SCSI emulation for USB Mass Storage devices [ 486.828714] usb 1-5: New USB device found, idVendor=0930, idProduct=653d [ 486.828718] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 486.828721] usb 1-5: Product: DataTraveler 2.0 [ 486.828723] usb 1-5: Manufacturer: Kingston [ 486.828725] usb 1-5: SerialNumber: 0605241801483 [ 486.828731] usb-storage: device found at 6 [ 486.828733] usb-storage: waiting for device to settle before scanning [ 491.831477] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 491.835296] sd 3:0:0:0: [sdc] 1971200 512-byte hardware sectors: (1.00 GB/962 MiB) [ 491.835782] sd 3:0:0:0: [sdc] Write Protect is off [ 491.835788] sd 3:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 491.835793] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 502.106672] usb 1-5: reset high speed USB device using ehci_hcd and address 6 [ 502.260689] sd 3:0:0:0: [sdc] 1971200 512-byte hardware sectors: (1.00 GB/962 MiB) [ 502.261211] sd 3:0:0:0: [sdc] Write Protect is off [ 502.261219] sd 3:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 502.261224] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 502.261236] sdc: sdc1 [ 502.264332] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 502.266089] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 502.266539] usb-storage: device scan complete