Skip to contentSkip to conversation

vid&pid problems in usb_probe()

DISCUSSION [email protected] 2 participants 2 messages May 8, 2004

lore
Share & tools
lore
#0 lore raw

Thank you for replying,but I don't know what you mean, USB descriptor data structure is defined in "/usr/include/linux/usb.h"

my kernel version is 2.4.18.

----- Original Message -----
From: Randy.Dunlap
To: [email protected]
Cc: [email protected]
Subject: Re: vid&pid problems in usb_probe()
Sent: Sat May 08 12:45:54 CST 2004

Quoted 15 lines · On Sat, 8 May 2004 11:48:44 +0800 (CST) <[email protected]> wrote:
| 
| 
| I am writting an usb driver.You know function usb_probe(...) is used to determine whether the usbdevices just pluged in is what the driver is for.

a. Please learn to use the Enter/Return key around character position 70 (or before) on each line.

b. what kernel version? (*always*)

c. You should ask this on the linux-usb-development mailing list:
[email protected]

Quoted 10 lines
| The Vid and Pid of my usb device are 0x1111 and 0x0000 respectively.
| 
| the program is :
| 
| static void* usb_probe(struct usb_device *udev, unsigned int ifnum, const struct usb_device_id *id)
| {
|     ..............
|     ..............
|     
|     printk("<1>Vid:%x

Pid:%x ",udev->descriptor.idVendor,udev->descriptor.idProduct);

Quoted 40 lines
| 
|     if ((udev->descriptor.idVendor!=0x1111)
|          ||(udev->descriptor.idProduct!=0x0000)) return NULL;
| 
|     ..............
| }
| 
| when I plug the device whose vid & pid is 0x1111 & 0x0000 respectively.
| this Module displayed
| 
| 
| Vid:0
| Pid:201
| 
| usb.c ........ no active driver for this device;
| 
| and when I plug another device , I also got wrong vid & pid.
| 
| But when I wrote program as below:
| 
| __u16 tmp=0x1111;
| printk("<1>%x",tmp);
| 
| it can print "1111" on the screen. That means my syntax is correct.
| I mean, the problem may be at the data transfered into function usb_probe()
| Maybe data transfered into function usb_probe() is wrong.
| 
| I wonder where is the problem, how can i solve.

Seeing more (or all) of your source code could help. I'm especially curious (suspicious) about your USB descriptor data structures.

--
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw

On Sat, 8 May 2004 17:05:24 +0800 (CST) <[email protected]> wrote:

| Thank you for replying,but I don't know what you mean,
| USB descriptor data structure is defined in 
| "/usr/include/linux/usb.h"
| 
| my kernel version is 2.4.18.

Are you saying that your driver uses /usr/include/linux/usb.h ? If so, that's wrong. It should use linux-2.4.18/include/linux/usb.h instead, and it will if you build/make the driver correctly.

So, how do you build this driver? Show the Makefile or command line that you use.

Regarding the data structure, I don't know what /usr/include/linux/usb.h on your system contains since that is not a kernel header file (and drivers shouldn't use those). I do recall, however, that many moons ago, there were some usb structs in usb.h that were not defined with __attribute__((packed)), and that could cause field offsets to be off a bit, er, byte (or more).

And what processor arch. are you doing this on?

Driver source code?

~Randy

| -----  Original Message  -----
| From: Randy.Dunlap 
| To: [email protected] 
| Cc: [email protected] 
| Subject: Re: vid&pid problems in usb_probe()
| Sent: Sat May 08 12:45:54 CST 2004
| 
| > On Sat, 8 May 2004 11:48:44 +0800 (CST) <[email protected]> wrote:
| > 
| > | 
| > | 
| > | I am writting an usb driver.You know function usb_probe(...) is used to determine whether the usbdevices just pluged in is what the driver is for.
| > 
| > a.  Please learn to use the Enter/Return key around character position
| > 70 (or before) on each line.
| > 
| > b.  what kernel version?   (*always*)
| > 
| > c.  You should ask this on the linux-usb-development mailing list:
| > [email protected]
| > 
| > 
| > | The Vid and Pid of my usb device are 0x1111 and 0x0000 respectively.
| > | 
| > | the program is :
| > | 
| > | static void* usb_probe(struct usb_device *udev, unsigned int ifnum, const struct usb_device_id *id)
| > | {
| > |     ..............
| > |     ..............
| > |     
| > |     printk("<1>Vid:%x
| Pid:%x
| ",udev->descriptor.idVendor,udev->descriptor.idProduct);
| > | 
| > |     if ((udev->descriptor.idVendor!=0x1111)
| > |          ||(udev->descriptor.idProduct!=0x0000)) return NULL;
| > | 
| > |     ..............
| > | }
| > | 
| > | when I plug the device whose vid & pid is 0x1111 & 0x0000 respectively.
| > | this Module displayed
| > | 
| > | 
| > | Vid:0
| > | Pid:201
| > | 
| > | usb.c ........ no active driver for this device;
| > | 
| > | and when I plug another device , I also got wrong vid & pid.
| > | 
| > | But when I wrote program as below:
| > | 
| > | __u16 tmp=0x1111;
| > | printk("<1>%x",tmp);
| > | 
| > | it can print "1111" on the screen. That means my syntax is correct.
| > | I mean, the problem may be at the data transfered into function usb_probe()
| > | Maybe data transfered into function usb_probe() is wrong.
| > | 
| > | I wonder where is the problem, how can i solve.
| > 
| > Seeing more (or all) of your source code could help.
| > I'm especially curious (suspicious) about your USB descriptor data
| > structures.