Skip to contentSkip to conversation

Western Digital GreenPower drives and Linux

DISCUSSION [email protected] 3 participants 3 messages Apr 27, 2008 – Apr 29, 2008

lore
Share & tools
lore
#0 lore raw

on a second system , my wd drive shows this values:

  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       853
193 Load_Cycle_Count        0x0032   170   170   000    Old_age   Always       -       90960

absolutely scary.....

meanwhile, i got wdidle3 from WD support and set it to 25secs (factory support seems to be at 8 secs) - but still waiting for an answer if this is a bug or not.

i`m really wondering why support is so quiet here.... anybody got a response from support about this?

will take a look how the drive behaves with windows......maybe things look different there.

List:       linux-kernel
Subject:    Re: Western Digital GreenPower drives and Linux
From:       "Tvrtko A. Ursulin" <tvrtko () ursulin ! net>
Date:       2008-04-16 19:46:33
Message-ID: 200804162046.33245.tvrtko () ursulin ! net

[Download message RAW]

Quoted 9 lines · On Wednesday 16 April 2008 12:40:14 Helge Hafting wrote:
Quoted 7 lines · Tvrtko A. Ursulin

9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 66
193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always - 10233

At this rate the disk would reach it's design limit for load/unload cycles in around 80 days. Not good - so I implemented a lame workaround of keeping disk busy every couple of seconds - hopefully that won't kill it sooner that unloads would..

Quoted 6 lines

Yuck, how stupid!
But the solution is simple. Make sure to get a warranty of much more than 80 days. Use RAID-1 (or backup often).
Just let those disks destroy themselves (they _are_ faulty) and get new ones all the time. As long as they make them this stupid, you won't have to buy new disks again. Free warranty replacements forever.

:) I am not so enthusiastic about fiddling with my NAS box every couple of months.

Quoted 3 lines

To be a bit more constructive, tell them about this strategy. Perhaps they get
busy fixing the firmware?

I have suggested exactly what you say - unfortunately the conversation has gone cold since. Maybe they are busy already. :)

Tvrtko

_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114

#1 lore raw

[email protected] escreveu:

Quoted 9 lines
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       853
193 Load_Cycle_Count        0x0032   170   170   000    Old_age   Always       -       90960

absolutely scary.....

meanwhile, i got wdidle3 from WD support and set it to 25secs (factory support seems to be at 8 secs) - but still waiting for an answer if this is a bug or not.

i`m really wondering why support is so quiet here.... anybody got a response from support about this?

This is mine:

Power_On_Hours 0x0032 085 085 000 Old_age Always 6261
Load_Cycle_Count 0x0032 065 065 000 Old_age Always 355089

Model Family:     Toshiba 2.5" HDD series (80 GB and above)
Device Model:     TOSHIBA MK1032GAX
Serial Number:    75QW2718S
Firmware Version: AB211A
User Capacity:    100,030,242,816 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Apr 27 15:55:19 2008 BRT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Regards,
Renato S. Yamane

#2 lore raw
In reply to [email protected]
Quoted 7 lines · On Sunday 27 April 2008 19:45, [email protected] wrote:

on a second system , my wd drive shows this values:

9 Power_On_Hours 0x0032 099 099 000 Old_age Always
- 853
193 Load_Cycle_Count 0x0032 170 170 000 Old_age Always
- 90960

Quoted 9 lines

absolutely scary.....

meanwhile, i got wdidle3 from WD support and set it to 25secs (factory support seems to be at 8 secs) - but still waiting for an answer if this is a bug or not.

i`m really wondering why support is so quiet here.... anybody got a response from support about this?

[snip]

I contacted WD support, asking for wdidle. They asked about my drive, and warned me that this application was meant for a specific drive and could damage others. I replied with information about my drives and never heard back. I repeated my request, without result.

This mess combined with disappointing performance from a couple of WD Mybooks will certainly make me think twice before buying or recommending WD for the foreseeable future.

//Niels