Add SP800-108 KDF implementation to crypto API
Subsystems (3)
v3 cover Add SP800-108 KDF implementation to crypto API
Hi,
The key derviation functions are considered to be a cryptographic operation. As cryptographic operations are provided via the kernel crypto API, this patch set consolidates the SP800-108 KDF implementation into the crypto API.
If this patch is accepted, another patch set will be published attempting to move the HKDF implementation from the crypto file system code base to the kernel crypto API.
The KDF implementation is provided as service functions. Yet, the interface to the the provided KDF is modeled such, that additional KDF implementation can use the same API style. The goal is to allow the transformation from a service function into a crypto API template eventually.
The KDF executes a power-on self test with test vectors from commonly known sources.
Tbe SP800-108 KDF implementation is used to replace the implementation in the keys subsystem. The implementation was verified using the keyutils command line test code provided in tests/keyctl/dh_compute/valid. All tests show that the expected values are calculated with the new code.
Changes v3:
* port to kernel 5.16-rc1
* remove the HKDF patch to only leave the SP800-108 patch
Stephan Mueller (4):
crypto: Add key derivation self-test support code
crypto: add SP800-108 counter key derivation function
security: DH - remove dead code for zero padding
security: DH - use KDF implementation from crypto API
crypto/Kconfig | 7 ++ crypto/Makefile | 5 + crypto/kdf_sp800108.c | 149 +++++++++++++++++++++++++ include/crypto/internal/kdf_selftest.h | 71 ++++++++++++ include/crypto/kdf_sp800108.h | 61 ++++++++++ security/keys/Kconfig | 2 +- security/keys/dh.c | 118 +++----------------- 7 files changed, 310 insertions(+), 103 deletions(-) create mode 100644 crypto/kdf_sp800108.c create mode 100644 include/crypto/internal/kdf_selftest.h create mode 100644 include/crypto/kdf_sp800108.h
Signature · 1 line
2.33.1
PATCH v3 1/4 crypto: Add key derivation self-test support code
As a preparation to add the key derivation implementations, the self-test data structure definition and the common test code is made available.
The test framework follows the testing applied by the NIST CAVP test approach.
The structure of the test code follows the implementations found in crypto/testmgr.c|h. In case the KDF implementations will be made available via a kernel crypto API templates, the test code is intended to be merged into testmgr.c|h.
--- include/crypto/internal/kdf_selftest.h | 71 ++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 include/crypto/internal/kdf_selftest.h
include/crypto/internal/kdf_selftest.h new file +71 -0
@@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* +* Copyright (C) 2021, Stephan Mueller <[email protected]> +*/ + +#ifndef _CRYPTO_KDF_SELFTEST_H +#define _CRYPTO_KDF_SELFTEST_H + +#include <crypto/hash.h> +#include <linux/uio.h> + +struct kdf_testvec { +unsigned char *key; +size_t keylen; +unsigned char *ikm; +size_t ikmlen; +struct kvec info; +unsigned char *expected; +size_t expectedlen; +}; + +static inline int +kdf_test (const struct kdf_testvec *test,const char *name, +int (*crypto_kdf_setkey)(struct crypto_shash *kmd, +const u8 *key,size_t keylen, +const u8 *ikm,size_t ikmlen), +int (*crypto_kdf_generate)(struct crypto_shash *kmd, +const struct kvec *info, +unsigned int info_nvec, +u8 *dst,unsigned int dlen)) +{ +struct crypto_shash *kmd; +int ret; +u8 *buf =kzalloc (test->expectedlen,GFP_KERNEL ); + +if (!buf) +return -ENOMEM ; + + kmd =crypto_alloc_shash (name,0 ,0 ); +if (IS_ERR (kmd)) { +pr_err ("alg: kdf: could not allocate hash handle for %s\n" , + name); +kfree (buf); +return -ENOMEM ; + } + + ret =crypto_kdf_setkey (kmd, test->key, test->keylen, + test->ikm, test->ikmlen); +if (ret) { +pr_err ("alg: kdf: could not set key derivation key\n" ); + goto err; + } + + ret =crypto_kdf_generate (kmd, &test->info,1 , buf, test->expectedlen); +if (ret) { +pr_err ("alg: kdf: could not obtain key data\n" ); + goto err; + } + + ret =memcmp (test->expected, buf, test->expectedlen); +if (ret) + ret = -EINVAL ; + +err: +crypto_free_shash (kmd); +kfree (buf); +return ret; +} + +#endif /* _CRYPTO_KDF_SELFTEST_H */
Signature · 1 line
2.33.1
PATCH v3 2/4 crypto: add SP800-108 counter key derivation function
In reply to Stephan MüllerSP800-108 defines three KDFs - this patch provides the counter KDF implementation.
The KDF is implemented as a service function where the caller has to maintain the hash / HMAC state. Apart from this hash/HMAC state, no additional state is required to be maintained by either the caller or the KDF implementation.
The key for the KDF is set with the crypto_kdf108_setkey function which is intended to be invoked before the caller requests a key derivation operation via crypto_kdf108_ctr_generate.
SP800-108 allows the use of either a HMAC or a hash as crypto primitive for the KDF. When a HMAC primtive is intended to be used, crypto_kdf108_setkey must be used to set the HMAC key. Otherwise, for a hash crypto primitve crypto_kdf108_ctr_generate can be used immediately after allocating the hash handle.
--- crypto/Kconfig | 7 ++ crypto/Makefile | 5 ++ crypto/kdf_sp800108.c | 149 ++++++++++++++++++++++++++++++++++ include/crypto/kdf_sp800108.h | 61 ++++++++++++++ 4 files changed, 222 insertions(+) create mode 100644 crypto/kdf_sp800108.c create mode 100644 include/crypto/kdf_sp800108.h
crypto/Kconfig +7 -0
@@ -1845,6 +1845,13 @@ config CRYPTO_JITTERENTROPY random numbers. This Jitterentropy RNG registers with the kernel crypto API and can be used by any caller. +config CRYPTO_KDF800108_CTR + tristate "Counter KDF (SP800-108)" + select CRYPTO_HASH + help + Enable the key derivation function in counter mode compliant to + SP800-108. + config CRYPTO_USER_API tristate
crypto/Makefile +5 -0
@@ -200,3 +200,8 @@ obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/ obj-$(CONFIG_CRYPTO_HASH_INFO) += hash_info.o crypto_simd-y := simd.o obj-$(CONFIG_CRYPTO_SIMD) += crypto_simd.o + +# +# Key derivation function +# +obj-$(CONFIG_CRYPTO_KDF800108_CTR) += kdf_sp800108.o
crypto/kdf_sp800108.c new file +149 -0
149 lines not on this page · raw message
include/crypto/kdf_sp800108.h new file +61 -0
61 lines not on this page · raw message
Signature · 1 line
2.33.1
Re: [PATCH v3 2/4] crypto: add SP800-108 counter key derivation function
Quoted 33 lines · Stephan Müller
SP800-108 defines three KDFs - this patch provides the counter KDF implementation.
The KDF is implemented as a service function where the caller has to maintain the hash / HMAC state. Apart from this hash/HMAC state, no additional state is required to be maintained by either the caller or the KDF implementation.
The key for the KDF is set with the
crypto_kdf108_setkeyfunction which is intended to be invoked before the caller requests a key derivation operation viacrypto_kdf108_ctr_generate.SP800-108 allows the use of either a HMAC or a hash as crypto primitive for the KDF. When a HMAC primtive is intended to be used,
crypto_kdf108_setkeymust be used to set the HMAC key. Otherwise, for a hash crypto primitvecrypto_kdf108_ctr_generatecan be used immediately after allocating the hash handle.Signed-off-by Stephan Mueller <[email protected]>--- crypto/Kconfig | 7 ++ crypto/Makefile | 5 ++ crypto/kdf_sp800108.c | 149 ++++++++++++++++++++++++++++++++++ include/crypto/kdf_sp800108.h | 61 ++++++++++++++ 4 files changed, 222 insertions(+) create mode 100644 crypto/kdf_sp800108.c create mode 100644 include/crypto/kdf_sp800108.hcrypto/Kconfig +0
-0
crypto/Kconfig config CRYPTO_JITTERENTROPY · line 1853
Quoted 9 lines
crypto/Kconfig +6
-0@@ -1845,6 +1845,13 @@ config CRYPTO_JITTERENTROPY random numbers. This Jitterentropy RNG registers with the kernel crypto API and can be used by any caller. +config CRYPTO_KDF800108_CTR + tristate "Counter KDF (SP800-108)" + select CRYPTO_HASH + help + Enable the key derivation function in counter mode compliant to + SP800-108.
These are just some library functions, so they shouldn't be user-selectable.
crypto/Kconfig config CRYPTO_JITTERENTROPY
Quoted 12 lines
crypto/Kconfig +12
-0+/* + * The seeding of the KDF + */ +int crypto_kdf108_setkey(struct crypto_shash *kmd, + const u8 *key, size_t keylen, + const u8 *ikm, size_t ikmlen) +{ + unsigned int ds = crypto_shash_digestsize(kmd); + + /* SP800-108 does not support IKM */ + if (ikm || ikmlen) + return -EINVAL;
Why have the ikm parameter if it's not supported?
crypto/Kconfig
Quoted 7 lines
crypto/Kconfig +7
-0+ /* + * We require that we operate on a MAC -- if we do not operate on a + * MAC, this function returns an error. + */ + return crypto_shash_setkey(kmd, key, keylen); +} +EXPORT_SYMBOL(crypto_kdf108_setkey);
Well, crypto_shash_setkey() will succeed if the hash algorithm takes a "key".
That doesn't necessarily mean that it's a MAC. It could be crc32 or xxhash64,
for example; those interpret the "key" as the initial value.
crypto/Kconfig
Quoted 8 lines
crypto/Kconfig +8
-0+static int __init crypto_kdf108_init(void) +{ + int ret = kdf_test(&kdf_ctr_hmac_sha256_tv_template[0], "hmac(sha256)", + crypto_kdf108_setkey, crypto_kdf108_ctr_generate); + + if (ret) + pr_warn("alg: self-tests for CTR-KDF (hmac(sha256)) failed (rc=%d)\n", + ret);
This should be a WARN() since it indicates a kernel bug.
- Eric
Re: [PATCH v3 2/4] crypto: add SP800-108 counter key derivation function
Am Mittwoch, 17. November 2021, 20:11:03 CET schrieb Eric Biggers:
Hi Eric,
thanks for your comments.
Quoted 39 lines · Stephan Müller
Quoted 38 lines
SP800-108 defines three KDFs - this patch provides the counter KDF implementation.
The KDF is implemented as a service function where the caller has to maintain the hash / HMAC state. Apart from this hash/HMAC state, no additional state is required to be maintained by either the caller or the KDF implementation.
The key for the KDF is set with the
crypto_kdf108_setkeyfunction which is intended to be invoked before the caller requests a key derivation operation viacrypto_kdf108_ctr_generate.SP800-108 allows the use of either a HMAC or a hash as crypto primitive for the KDF. When a HMAC primtive is intended to be used,
crypto_kdf108_setkeymust be used to set the HMAC key. Otherwise, for a hash crypto primitvecrypto_kdf108_ctr_generatecan be used immediately after allocating the hash handle.Signed-off-by Stephan Mueller <[email protected]>---
crypto/Kconfig | 7 ++ crypto/Makefile | 5 ++ crypto/kdf_sp800108.c | 149 ++++++++++++++++++++++++++++++++++ include/crypto/kdf_sp800108.h | 61 ++++++++++++++ 4 files changed, 222 insertions(+) create mode 100644 crypto/kdf_sp800108.c create mode 100644 include/crypto/kdf_sp800108.hcrypto/Kconfig +0
-0@@ -1845,6 +1845,13 @@ config CRYPTO_JITTERENTROPY random numbers. This Jitterentropy RNG registers with the kernel crypto API and can be used by any caller.
Quoted 8 lines
crypto/Kconfig config CRYPTO_JITTERENTROPY · line 1853
Quoted 6 lines
crypto/Kconfig +6
-0+config CRYPTO_KDF800108_CTR + tristate "Counter KDF (SP800-108)" + select CRYPTO_HASH + help + Enable the key derivation function in counter mode compliant to + SP800-108.These are just some library functions, so they shouldn't be user-selectable.
Ok, I will remove the user-visible entry in the kernel configuration.
Quoted 6 lines
Quoted 6 lines
crypto/Kconfig +6
-0+/* + * The seeding of the KDF + */ +int crypto_kdf108_setkey(struct crypto_shash *kmd, + const u8 *key, size_t keylen, + const u8 *ikm, size_t ikmlen)
Quoted 8 lines
crypto/Kconfig
Quoted 6 lines
crypto/Kconfig +6
-0+{ + unsigned int ds = crypto_shash_digestsize(kmd); + + /* SP800-108 does not support IKM */ + if (ikm || ikmlen) + return -EINVAL;Why have the ikm parameter if it's not supported?
The original idea is that we have a common function declaration for SP800-108 and HKDF. I am still thinking that in the long run, a KDF template support may make sense. In this case, a common function declaration would be needed for all KDF implementations.
Furthermore, the test code can be shared between the different KDFs when we allow the ikm/ikmlen parameter for this function.
Quoted 12 lines
crypto/Kconfig
Quoted 8 lines
crypto/Kconfig +7
-0+ /* + * We require that we operate on a MAC -- if we do not operate on a + * MAC, this function returns an error. + */ + return crypto_shash_setkey(kmd, key, keylen); +} +EXPORT_SYMBOL(crypto_kdf108_setkey);Well,
crypto_shash_setkey()will succeed if the hash algorithm takes a
"key". That doesn't necessarily mean that it's a MAC. It could be crc32 or
xxhash64, for example; those interpret the "key" as the initial value.
Agreed. But I am not sure a check in this regard would be needed considering that this KDF is only an internal service function.
I have updated the comment accordingly.
Quoted 4 lines
crypto/Kconfig
Quoted 4 lines
crypto/Kconfig +3
-0+static int __init crypto_kdf108_init(void) +{ + int ret = kdf_test(&kdf_ctr_hmac_sha256_tv_template[0],
"hmac(sha256)",
Quoted 4 lines
crypto/Kconfig
Quoted 4 lines
crypto/Kconfig +4
-0+ crypto_kdf108_setkey, crypto_kdf108_ctr_generate); + + if (ret) + pr_warn("alg: self-tests for CTR-KDF (hmac(sha256)) failed
(rc=%d)\n",
Quoted 3 lines
crypto/Kconfig
Quoted 1 line
crypto/Kconfig +1
-0+ ret);This should be a
WARN()since it indicates a kernel bug.
Changed. Considering that the test result behavior should be identical to testmgr.c, I have added also the panic() call in case of fips_enabled.
Thanks a lot for your review.
Quoted 2 lines
- Eric
Ciao
Stephan
PATCH v3 3/4 security: DH - remove dead code for zero padding
In reply to Stephan MüllerRemove the specific code that adds a zero padding that was intended to be invoked when the DH operation result was smaller than the modulus. However, this cannot occur any more these days because the function mpi_write_to_sgl is used in the code path that calculates the shared secret in dh_compute_value. This MPI service function guarantees that leading zeros are introduced as needed to ensure the resulting data is exactly as long as the modulus. This implies that the specific code to add zero padding is dead code which can be safely removed.
--- security/keys/dh.c | 25 ++++--------------------- 1 file changed, 4 insertions(+), 21 deletions(-)
security/keys/dh.c +4 -21
@@ -141,7 +141,7 @@ static void kdf_dealloc(struct kdf_sdesc *sdesc)* 'dlen' must be a multiple of the digest size. */ static int kdf_ctr (struct kdf_sdesc *sdesc,const u8 *src,unsigned int slen, -u8 *dst,unsigned int dlen,unsigned int zlen) +u8 *dst,unsigned int dlen) {struct shash_desc *desc = &sdesc->shash;unsigned int h =crypto_shash_digestsize (desc->tfm);
@@ -158,22 +158,6 @@ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen,if (err) goto err; -if (zlen && h) { -u8 tmpbuffer[32 ]; -size_t chunk =min_t (size_t, zlen,sizeof (tmpbuffer)); -memset (tmpbuffer,0 , chunk); - -do { - err =crypto_shash_update (desc, tmpbuffer, - chunk); -if (err) - goto err; - - zlen -= chunk; - chunk =min_t (size_t, zlen,sizeof (tmpbuffer)); - }while (zlen); - } -if (src && slen) { err =crypto_shash_update (desc, src, slen);if (err)
@@ -198,7 +182,7 @@ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen,static int keyctl_dh_compute_kdf (struct kdf_sdesc *sdesc,char __user *buffer,size_t buflen, -uint8_t *kbuf,size_t kbuflen,size_t lzero) +uint8_t *kbuf,size_t kbuflen) {uint8_t *outbuf =NULL ;int ret;
@@ -211,7 +195,7 @@ static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, goto err; } - ret =kdf_ctr (sdesc, kbuf, kbuflen, outbuf, outbuf_len, lzero); + ret =kdf_ctr (sdesc, kbuf, kbuflen, outbuf, outbuf_len);if (ret) goto err;
@@ -384,8 +368,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, } ret =keyctl_dh_compute_kdf (sdesc, buffer, buflen, outbuf, - req->dst_len + kdfcopy->otherinfolen, - outlen - req->dst_len); + req->dst_len + kdfcopy->otherinfolen); }else if (copy_to_user (buffer, outbuf, req->dst_len) ==0 ) { ret = req->dst_len; }else {
Signature · 1 line
2.33.1
Re: [PATCH v3 3/4] security: DH - remove dead code for zero padding
Quoted 9 lines · Stephan Müller
Remove the specific code that adds a zero padding that was intended to be invoked when the DH operation result was smaller than the modulus. However, this cannot occur any more these days because the function
mpi_write_to_sglis used in the code path that calculates the shared secret indh_compute_value. This MPI service function guarantees that leading zeros are introduced as needed to ensure the resulting data is exactly as long as the modulus. This implies that the specific code to add zero padding is dead code which can be safely removed.
Quoted 4 lines
Signed-off-by Stephan Mueller <[email protected]>---
security/keys/dh.c| 25 ++++---------------------1 file changed, 4 insertions(+), 21 deletions(-)
Hi Stephan -
Thanks for the cleanup!
Quoted 72 lines
security/keys/dh.c +4
-21@@ -141,7 +141,7 @@ static void kdf_dealloc(struct kdf_sdesc *sdesc)* 'dlen' must be a multiple of the digest size. */ static int kdf_ctr (struct kdf_sdesc *sdesc,const u8 *src,unsigned int slen, -u8 *dst,unsigned int dlen,unsigned int zlen) +u8 *dst,unsigned int dlen) {struct shash_desc *desc = &sdesc->shash;unsigned int h =crypto_shash_digestsize (desc->tfm);@@ -158,22 +158,6 @@ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen,if (err) goto err; -if (zlen && h) { -u8 tmpbuffer[32 ]; -size_t chunk =min_t (size_t, zlen,sizeof (tmpbuffer)); -memset (tmpbuffer,0 , chunk); - -do { - err =crypto_shash_update (desc, tmpbuffer, - chunk); -if (err) - goto err; - - zlen -= chunk; - chunk =min_t (size_t, zlen,sizeof (tmpbuffer)); - }while (zlen); - } -if (src && slen) { err =crypto_shash_update (desc, src, slen);if (err)@@ -198,7 +182,7 @@ static int kdf_ctr(struct kdf_sdesc *sdesc, const u8 *src, unsigned int slen,static int keyctl_dh_compute_kdf (struct kdf_sdesc *sdesc,char __user *buffer,size_t buflen, -uint8_t *kbuf,size_t kbuflen,size_t lzero) +uint8_t *kbuf,size_t kbuflen) {uint8_t *outbuf =NULL ;int ret;@@ -211,7 +195,7 @@ static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, goto err; } - ret =kdf_ctr (sdesc, kbuf, kbuflen, outbuf, outbuf_len, lzero); + ret =kdf_ctr (sdesc, kbuf, kbuflen, outbuf, outbuf_len);if (ret) goto err;@@ -384,8 +368,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, } ret =keyctl_dh_compute_kdf (sdesc, buffer, buflen, outbuf, - req->dst_len + kdfcopy->otherinfolen, - outlen - req->dst_len); + req->dst_len + kdfcopy->otherinfolen); }else if (copy_to_user (buffer, outbuf, req->dst_len) ==0 ) { ret = req->dst_len; }else {Signature · 1 line
2.33.1
--
Mat Martineau
Intel
Re: [PATCH v3 3/4] security: DH - remove dead code for zero padding
Am Mittwoch, 17. November 2021, 22:28:46 CET schrieb Mat Martineau:
Hi Mat,
Quoted 10 lines · Stephan Müller
Quoted 9 lines
Remove the specific code that adds a zero padding that was intended to be invoked when the DH operation result was smaller than the modulus. However, this cannot occur any more these days because the function
mpi_write_to_sglis used in the code path that calculates the shared secret indh_compute_value. This MPI service function guarantees that leading zeros are introduced as needed to ensure the resulting data is exactly as long as the modulus. This implies that the specific code to add zero padding is dead code which can be safely removed.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Stephan Mueller <[email protected]>---
security/keys/dh.c| 25 ++++---------------------1 file changed, 4 insertions(+), 21 deletions(-)Hi Stephan -
Thanks for the cleanup!
Thank you for the review.
Quoted 2 lines
Acked-by Mat Martineau <[email protected]>
I have added your signature to the patch.
Ciao
Stephan
PATCH v3 4/4 security: DH - use KDF implementation from crypto API
In reply to Stephan MüllerThe kernel crypto API provides the SP800-108 counter KDF implementation. Thus, the separate implementation provided as part of the keys subsystem can be replaced with calls to the KDF offered by the kernel crypto API.
The keys subsystem uses the counter KDF with a hash primitive. Thus, it only uses the call to crypto_kdf108_ctr_generate.
--- security/keys/Kconfig | 2 +- security/keys/dh.c | 97 +++++++------------------------------------ 2 files changed, 15 insertions(+), 84 deletions(-)
security/keys/Kconfig +1 -1
@@ -109,7 +109,7 @@ config KEY_DH_OPERATIONS bool "Diffie-Hellman operations on retained keys" depends on KEYS select CRYPTO - select CRYPTO_HASH + select CRYPTO_KDF800108_CTR select CRYPTO_DH help This option provides support for calculating Diffie-Hellman
security/keys/dh.c +14 -83
161 lines not on this page · raw message
Signature · 1 line
2.33.1
Re: [PATCH v3 4/4] security: DH - use KDF implementation from crypto API
Quoted 57 lines · Stephan Müller
The kernel crypto API provides the SP800-108 counter KDF implementation. Thus, the separate implementation provided as part of the keys subsystem can be replaced with calls to the KDF offered by the kernel crypto API.
The keys subsystem uses the counter KDF with a hash primitive. Thus, it only uses the call to
crypto_kdf108_ctr_generate.Signed-off-by Stephan Mueller <[email protected]>---
security/keys/Kconfig| 2 +-security/keys/dh.c| 97 +++++++------------------------------------2 files changed, 15 insertions(+), 84 deletions(-)security/keys/Kconfig +1
-1@@ -109,7 +109,7 @@ config KEY_DH_OPERATIONS bool "Diffie-Hellman operations on retained keys" depends on KEYS select CRYPTO - select CRYPTO_HASH + select CRYPTO_KDF800108_CTR select CRYPTO_DH help This option provides support for calculating Diffie-Hellmansecurity/keys/dh.c +2
-8@@ -11,6 +11,7 @@#include <crypto/hash.h> #include <crypto/kpp.h> #include <crypto/dh.h> +#include <crypto/kdf_sp800108.h> #include <keys/user-type.h> #include "internal.h" @@ -79,16 +80,9 @@ static void dh_crypto_done(struct crypto_async_request *req, int err)complete (&compl->completion); } -struct kdf_sdesc { -struct shash_desc shash; -char ctx[]; -}; - -static int kdf_alloc (struct kdf_sdesc **sdesc_ret,char *hashname) +static int kdf_alloc (struct crypto_shash **hash,char *hashname) {struct crypto_shash *tfm; -struct kdf_sdesc *sdesc; -int size;int err;/* allocate synchronous hash */
security/keys/dh.c static int kdf_alloc(struct kdf_sdesc **sdesc_ret, char *hashname) · line 97
Quoted 2 lines
security/keys/dh.c +0
-0@@ -102,14 +96,7 @@ static int kdf_alloc(struct kdf_sdesc **sdesc_ret, char *hashname)if (crypto_shash_digestsize (tfm) ==0 ) goto out_free_tfm;
With the sdesc allocation failure path removed below, there's only one use of the 'err' variable and the out_free_tfm code path. I suggest furthering the cleanup by removing err and the goto path, and moving the crypto_free_shash() and return -EINVAL here (where the goto currently is).
-Mat
Quoted 138 lines
security/keys/dh.c +11
-74- err = -ENOMEM ; - size =sizeof (struct shash_desc ) +crypto_shash_descsize (tfm); - sdesc =kmalloc (size,GFP_KERNEL ); -if (!sdesc) - goto out_free_tfm; - sdesc->shash.tfm = tfm; - - *sdesc_ret = sdesc; + *hash = tfm;return 0 ;@@ -118,76 +105,20 @@ static int kdf_alloc(struct kdf_sdesc **sdesc_ret, char *hashname)return err; } -static void kdf_dealloc (struct kdf_sdesc *sdesc) -{ -if (!sdesc) -return ; - -if (sdesc->shash.tfm) -crypto_free_shash (sdesc->shash.tfm); - -kfree_sensitive (sdesc); -} - -/* -* Implementation of the KDF in counter mode according to SP800-108 section 5.1 -* as well as SP800-56A section 5.8.1 (Single-step KDF). -* -* SP800-56A: -* The src pointer is defined as Z || other info where Z is the shared secret -* from DH and other info is an arbitrary string (see SP800-56A section -* 5.8.1.2). -* -* 'dlen' must be a multiple of the digest size. -*/ -static int kdf_ctr (struct kdf_sdesc *sdesc,const u8 *src,unsigned int slen, -u8 *dst,unsigned int dlen) +static void kdf_dealloc (struct crypto_shash *hash) { -struct shash_desc *desc = &sdesc->shash; -unsigned int h =crypto_shash_digestsize (desc->tfm); -int err =0 ; -u8 *dst_orig = dst; -__be32 counter =cpu_to_be32 (1 ); - -while (dlen) { - err =crypto_shash_init (desc); -if (err) - goto err; - - err =crypto_shash_update (desc, (u8 *)&counter,sizeof (__be32)); -if (err) - goto err; - -if (src && slen) { - err =crypto_shash_update (desc, src, slen); -if (err) - goto err; - } - - err =crypto_shash_final (desc, dst); -if (err) - goto err; - - dlen -= h; - dst += h; - counter =cpu_to_be32 (be32_to_cpu (counter) +1 ); - } - -return 0 ; - -err: -memzero_explicit (dst_orig, dlen); -return err; +if (hash) +crypto_free_shash (hash); } -static int keyctl_dh_compute_kdf (struct kdf_sdesc *sdesc, +static int keyctl_dh_compute_kdf (struct crypto_shash *hash,char __user *buffer,size_t buflen,uint8_t *kbuf,size_t kbuflen) { +struct kvec kbuf_iov = { .iov_base = kbuf, .iov_len = kbuflen };uint8_t *outbuf =NULL ;int ret; -size_t outbuf_len =roundup (buflen, -crypto_shash_digestsize (sdesc->shash.tfm)); +size_t outbuf_len =roundup (buflen,crypto_shash_digestsize (hash)); outbuf =kmalloc (outbuf_len,GFP_KERNEL );if (!outbuf) {@@ -195,7 +126,7 @@ static int keyctl_dh_compute_kdf(struct kdf_sdesc *sdesc, goto err; } - ret =kdf_ctr (sdesc, kbuf, kbuflen, outbuf, outbuf_len); + ret =crypto_kdf108_ctr_generate (hash, &kbuf_iov,1 , outbuf, outbuf_len);if (ret) goto err;@@ -224,7 +155,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params,struct kpp_request *req;uint8_t *secret;uint8_t *outbuf; -struct kdf_sdesc *sdesc =NULL ; +struct crypto_shash *hash =NULL ;if (!params || (!buffer && buflen)) { ret = -EINVAL ;@@ -257,7 +188,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, }/* allocate KDF from the kernel crypto API */ - ret =kdf_alloc (&sdesc, hashname); + ret =kdf_alloc (&hash, hashname);kfree (hashname);if (ret) goto out1;@@ -367,7 +298,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, goto out6; } - ret =keyctl_dh_compute_kdf (sdesc, buffer, buflen, outbuf, + ret =keyctl_dh_compute_kdf (hash, buffer, buflen, outbuf, req->dst_len + kdfcopy->otherinfolen); }else if (copy_to_user (buffer, outbuf, req->dst_len) ==0 ) { ret = req->dst_len;@@ -386,7 +317,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params,out2:
dh_free_data(&dh_inputs);out1:
security/keys/dh.c +1
-1-kdf_dealloc (sdesc); +kdf_dealloc (hash);
Quoted 10 lines
return ret; }Signature · 1 line
2.33.1
--
Mat Martineau
Intel