Terrible problem,
here is my one cent :-)
propably somebody is changing a MAC so you DHCP will grant them specific IP.
u can try nmap them them to see whos behind that MAC (at the moment where there is only one station turned on). then by using unplug and seek-the-hacker method u can find from what switch/port he's comming. if u posses administrable switch it can be much easyier.
if u must verify every user, turn to pptp.
Quoted 15 lines · Konrad
Is any way to detect changed MAC adresses?
Someone taught change MACs peoples in my network and I have problems.
E.g. Two computers working on one MAC, and one IP (static ARP and DHCP). WinXP is screaming some message... that two computers or more have the same IP.
How can I find out who's changed MAC?
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 2 lines
Miłego Dnia Krystian Antoni
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 1 line · On Mon, 30 May 2005 20:41:20 +0200 Konrad <[email protected]> wrote:
Is any way to detect changed MAC adresses?
I have been working on this for some time. You can try the current version:
http://shurdeek.routehat.org/tmp/dhcpwatch2.pl
(please don't ask how it works, I'm pretty busy now :-)).
Quoted 1 line
Someone taught change MACs peoples in my network and I have problems.
Yeah I know, I have seen this too.
Quoted 1 line
E.g. Two computers working on one MAC, and one IP (static ARP and DHCP).
Exactly.
Quoted 2 lines
WinXP is screaming some message... that two computers or more have the same IP.
Actually this happens when people use the same IP but a *different* MAC.
Yours sincerely,
Peter
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Yes, I have this problem too. And I came up with two ideas: one money comsuming, one time consuming.
Money comsuming: get management switches everywhere, and limit MAC learning per port. My network amounts to 500+ stations, over a preety wide area (all on ethernet), costs evaluated at 30.000$. Rather expensive, ha?
Time consuming: get into every windows workstation a program that alows network connection if MAC is unchanged from the one stored localy in an encrypted file.
Boss evaluated my ideas, and, guess what? I am now working on the program described above.
It will be publicly available, of course...
Quoted 17 lines · On Mon, 30 May 2005 20:41:20 +0200 Konrad <[email protected]> wrote:
Quoted 2 lines
Is any way to detect changed MAC adresses?
I have been working on this for some time. You can try the current version:
http://shurdeek.routehat.org/tmp/dhcpwatch2.pl(please don't ask how it works, I'm pretty busy now :-)).
Quoted 1 line
Someone taught change MACs peoples in my network and I have problems.
Yeah I know, I have seen this too.
Quoted 1 line
E.g. Two computers working on one MAC, and one IP (static ARP and DHCP).
Exactly.
Quoted 2 lines
WinXP is screaming some message... that two computers or more have the same IP.
Quoted 9 lines
Actually this happens when people use the same IP but a *different* MAC.
Yours sincerely,
Peter
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
for user verification pptp can be used. its free :-)
Quoted 50 lines · On 5/31/05, [email protected] <[email protected]> wrote:
Yes, I have this problem too. And I came up with two ideas: one money comsuming, one time consuming.
Money comsuming: get management switches everywhere, and limit MAC learning per port. My network amounts to 500+ stations, over a preety wide area (all on ethernet), costs evaluated at 30.000$. Rather expensive, ha?
Time consuming: get into every windows workstation a program that alows network connection if MAC is unchanged from the one stored localy in an encrypted file.
Boss evaluated my ideas, and, guess what? I am now working on the program described above.
It will be publicly available, of course...
Quoted 17 lines · On Mon, 30 May 2005 20:41:20 +0200 Konrad <[email protected]> wrote:
Quoted 2 lines
Is any way to detect changed MAC adresses?
I have been working on this for some time. You can try the current version:
http://shurdeek.routehat.org/tmp/dhcpwatch2.pl(please don't ask how it works, I'm pretty busy now :-)).
Quoted 1 line
Someone taught change MACs peoples in my network and I have problems.
Yeah I know, I have seen this too.
Quoted 1 line
E.g. Two computers working on one MAC, and one IP (static ARP and DHCP).
Exactly.
Quoted 2 lines
WinXP is screaming some message... that two computers or more have the same IP.
Quoted 9 lines
Actually this happens when people use the same IP but a *different* MAC.
Yours sincerely,
Peter
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 2 lines
Miłego Dnia Krystian Antoni
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi all,
I did not read the beginning of this thread, and I don't know if this has been said before, so forgive me if it's irrelevant:
I highly suggest you use arpwatch. It's a daemon that monitors MAC/IP on a network, and can notify the administrator when something changes.
If you want to force the MAC for an IP, use "arp -f /etc/ethers" (man arp). Iptables does the same thing with MAC matching, but using arp with a fixed table is "the proper thing to do" (tm).
I hope this helps.
Regards,
Sylvain
Quoted 61 lines · Krystian Antoni
for user verification pptp can be used. its free :-)
Quoted 50 lines · On 5/31/05, [email protected] <[email protected]> wrote:
Yes, I have this problem too. And I came up with two ideas: one money comsuming, one time consuming.
Money comsuming: get management switches everywhere, and limit MAC learning per port. My network amounts to 500+ stations, over a preety wide
area (all on ethernet), costs evaluated at 30.000$. Rather expensive, ha?Time consuming: get into every windows workstation a program that alows network connection if MAC is unchanged from the one stored localy in an encrypted file.
Boss evaluated my ideas, and, guess what? I am now working on the program
described above.It will be publicly available, of course...
Quoted 13 lines · On Mon, 30 May 2005 20:41:20 +0200 Konrad <[email protected]> wrote:
Quoted 2 lines
Is any way to detect changed MAC adresses?
I have been working on this for some time. You can try the current version:
http://shurdeek.routehat.org/tmp/dhcpwatch2.pl(please don't ask how it works, I'm pretty busy now :-)).
Quoted 1 line
Someone taught change MACs peoples in my network and I have problems.
Yeah I know, I have seen this too.
Quoted 1 line
E.g. Two computers working on one MAC, and one IP (static ARP and
DHCP).
Quoted 5 lines
Exactly.
Quoted 2 lines
WinXP is screaming some message... that two computers or more have the same IP.
Actually this happens when people use the same IP but a *different*
MAC.
Quoted 8 lines
Yours sincerely,
Peter
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartcQuoted 5 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 8 lines
--
Mi³ego Dnia
Krystian Antoni
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
There are a few problems here that my app is ment to solve, other than VPN using PPTP.
Number 1: folks are changing IP just because the can, as to annoy the other people in the network with Win XP screaming...
Number 2: folks will change PPTP users/passwords among them, to benefit from higher bandwidth. This cannot be achived with this program, as it is tied to the computer it was instaled by my technicians (TIED = motherboard Serial Number, HDD Serial Number. etc.).
Number 3: folks trying to change their MACs will be caught and their acts will be logged. A message will be printed as to make them see that this are not proper manners and discourage them from trying again. Hopefully.
Downsides: if the user uninstalles the software...I can do nothing about it, but limit internet and partial network access (where management switches and routers are placed).So my solution does no more good than a rub on a wodden leg. But with the app installed, we are sure of better results than with PPTP. Even the psichological ones are good.
Quoted 61 lines
for user verification pptp can be used. its free :-)
Quoted 50 lines · On 5/31/05, [email protected] <[email protected]> wrote:
Yes, I have this problem too. And I came up with two ideas: one money comsuming, one time consuming.
Money comsuming: get management switches everywhere, and limit MAC learning per port. My network amounts to 500+ stations, over a preety wide
area (all on ethernet), costs evaluated at 30.000$. Rather expensive, ha?Time consuming: get into every windows workstation a program that alows network connection if MAC is unchanged from the one stored localy in an encrypted file.
Boss evaluated my ideas, and, guess what? I am now working on the program
described above.It will be publicly available, of course...
Quoted 13 lines · On Mon, 30 May 2005 20:41:20 +0200 Konrad <[email protected]> wrote:
Quoted 2 lines
Is any way to detect changed MAC adresses?
I have been working on this for some time. You can try the current version:
http://shurdeek.routehat.org/tmp/dhcpwatch2.pl(please don't ask how it works, I'm pretty busy now :-)).
Quoted 1 line
Someone taught change MACs peoples in my network and I have problems.
Yeah I know, I have seen this too.
Quoted 1 line
E.g. Two computers working on one MAC, and one IP (static ARP and
DHCP).
Quoted 5 lines
Exactly.
Quoted 2 lines
WinXP is screaming some message... that two computers or more have the same IP.
Actually this happens when people use the same IP but a *different*
MAC.
Quoted 8 lines
Yours sincerely,
Peter
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartcQuoted 5 lines
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 4 lines
--
Mi³ego Dnia
Krystian Antoni
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 1 line · On Tue, 31 May 2005 13:36:25 +0200 (CEST) "Sylvain BERTRAND"…
Hi all,
hi
Quoted 2 lines
I highly suggest you use arpwatch. It's a daemon that monitors MAC/IP on a network, and can notify the administrator when something changes.
arpwatch can only find out if the user changes his/her IP. If they change their MAC (and fake someone elses), you're out of luck :-(.
Quoted 3 lines
If you want to force the MAC for an IP, use "arp -f
/etc/ethers" (man arp). Iptables does the same thing with MAC matching, but using arp with a fixed table is "the proper thing to do" (tm).
[advertisement+joke]
Actually, "the proper thing to do" is to use ipset + macipmap, just like Route Hat does ;-)
[/advertisement+joke]
Quoted 1 line
Sylvain
Yours sincerely,
Peter
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 4 lines · Peter Surda
Quoted 1 line · On Tue, 31 May 2005 13:36:25 +0200 (CEST) "Sylvain BERTRAND"…
Hi all,
Quoted 8 lines
hi
Quoted 3 lines
I highly suggest you use arpwatch. It's a daemon that monitors MAC/IP on a
network, and can notify the administrator when something changes.arpwatch can only find out if the user changes his/her IP. If they change their
MAC (and fake someone elses), you're out of luck :-(.
apt-cache show arpwatch
[...]
Description: Ethernet/FDDI station activity monitor
Arpwatch maintains a database of Ethernet MAC addresses seen on the network, with their associated IP pairs. Alerts the system administrator via e-mail if any change happens, such as new station/activity, flip-flops, changed and re-used old addresses.
Quoted 10 lines
Quoted 5 lines
If you want to force the MAC for an IP, use "arp -f
/etc/ethers" (man arp).
Iptables does the same thing with MAC matching, but using arp with a fixed
table is "the proper thing to do" (tm).[advertisement+joke]
Actually, "the proper thing to do" is to use ipset + macipmap, just like Route
Hat does ;-)
[/advertisement+joke]
Well, it's up to you ;-)
Regards,
Sylvain
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 7 lines · On Tue, 31 May 2005 16:32:43 +0200 (CEST) "Sylvain BERTRAND"…
apt-cache show arpwatch
[...]
Description: Ethernet/FDDI station activity monitor
Arpwatch maintains a database of Ethernet MAC addresses seen on the network, with their associated IP pairs. Alerts the system administrator via e-mail if any change happens, such as new station/activity, flip-flops, changed and re-used old addresses.
Yes exactly. If they fake both MAC and IP (in case you have DHCP changing MAC is enough because it will take the same IP), arpwatch doesn't find any changes.
Quoted 1 line
Sylvain
Peter
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 11 lines · Peter Surda
Quoted 8 lines · On Tue, 31 May 2005 16:32:43 +0200 (CEST) "Sylvain BERTRAND"…
apt-cache show arpwatch
[...]
Description: Ethernet/FDDI station activity monitor Arpwatch maintains a database of Ethernet MAC addresses seen on the network, with their associated IP pairs. Alerts the system administrator
via e-mail if any change happens, such as new station/activity, flip-flops, changed and re-used old addresses.
Quoted 5 lines
Yes exactly. If they fake both MAC and IP (in case you have DHCP changing MAC is
enough because it will take the same IP), arpwatch doesn't find any changes.
2 possible solutions:
- check the router's ability to map a port to a mac, and detect changes on oe port
- have a script check the dhcp log file to report windows netbios name change on the same IP/MAC
Regards,
Sylvain
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 3 lines
How can I check operating system and netbios name in different way? Are more possible differences between computers in network (with the same MAC and IP)?
You can nmap the ip's you think is stolen. You can guess the operating system using the -O parameter to nmap. Other tools give you more data.
Quoted 1 line
How can I find out, that IP is being doubled?
You cand find out if an IP is being doubled using arping. If you do arping -b, all the machines using that IP will respond to the broadcast arp, thus giving you the posibility to immediatly spot a conflict (there will be two machines responding).
Quoted 9 lines
--
Thanks for all replies :PLenthir
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc