How to enable to print messages on serial port(ttyS0) in u-boot?
Dear all ,
Is there a option to print the message or some variable value which i av modified in code to print it on serial console to check whether it is getting executed or not? like we use printf in application programming . if yes how to enable it and use it? . thanks.
warm regards,
Ravi Kulkarni.
Signature · 2 lines
View this message in context: http://www.nabble.com/How-to-enable-to--print-messages-on-serial-port%28ttyS0%29-in-u-boot--tp26004165p26004165.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 7 lines · sunr2007 wrote:
Dear all ,
Is there a option to print the message or some variable value which i av modified in code to print it on serial console to check whether it is getting executed or not? like we use printf in application programming . if yes how to enable it and use it? . thanks.
warm regards,
Ravi Kulkarni.
Yes, printf(), as you can see by looking at the source. The serial port and printf() support is one of the first things that is configured exactly to help debug via print statements.
If it isn't working on your board, you have more fundamental problems (hardware initialization, serial port configuration, serial port selection, who knows???). Since we don't know anything about your board, we cannot help further.
Best regards,
gvb
Quoted 1 line
Quoted 1 line
Yes,
printf(), as you can see by looking at the source. The serial port
and printf() support is one of the first things that is >>configured exactly to help debug via print statements.
Quoted 1 line
Quoted 1 line
If it isn't working on your board, you have more fundamental problems
(hardware initialization, serial port configuration,
Quoted 1 line
Quoted 1 line
serial port selection, who knows???). Since we don't know anything about
your board, we cannot help further.
Hi ! Now im being able to get print on the serial console. My board is workin fine . its at91sam9261. the problem is something else. i have written a driver spi-new.c for the SPI interface using BUS 1 . now though this driver is getting compiled but its not getting executed when my board boots up . i have modified the following to u-boot source tree.
1) changed Makefile in /drivers/spi/ and added a line
COBJS-$(CONFIG_ATMEL_SPI) +=spi-new.o
2) changed config file in /include/configs/at91sam9261ek.h added a line
# CONFIG_ATMEL_SPI 1
though my init function is getting executed in the board file located at
/board/atmel/at91sam9261ek/at91sam9261ek.c
my driver code is not gettung executed when my board boots up.
can anyone let me know where else to change to add a new driver in u-boot
so tat ur board recognizes it.
warm regards,
Ravi Kulkarni.
Dear Ravi Kumar Kulkarni,
Quoted 4 lines · In message <[email protected]> you…
2) changed config file in /include/configs/at91sam9261ek.h added a line
#CONFIG_ATMEL_SPI1
As Mike already pointed out you should probably consider hiring someone who has a clue of the C programming language.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The word "fit", as I understand it, means "appropriate to a purpose",
and I would say the body of the Dean is supremely appropriate to the
purpose of sitting around all day and eating big heavy meals.
- Terry Pratchett, _Moving Pictures_Quoted 7 lines · Wolfgang Denk
Dear Ravi Kumar Kulkarni,
In message <[email protected]>
Quoted 1 line · you
Quoted 1 line
Quoted 1 line
#
CONFIG_ATMEL_SPI1
correction : its actually
#define CONFIG_ATMEL_SPI 1
Quoted 2 lines
Quoted 2 lines
As Mike already pointed out you should probably consider hiring someone who has a clue of the C programming language.
It was a typing mistake !!.not a known error. I feel let down by these comments.
warm regards,
Ravi Kulkarni.
Hi Ravi,
Quoted 8 lines · Ravi Kumar Kulkarni
Quoted 2 lines
Quoted 2 lines
Yes,
printf(), as you can see by looking at the source. The serialport and
printf()support is one of the first things that isQuoted 2 lines
Quoted 2 lines
configured exactly to help debug via print statements.
If it isn't working on your board, you have more fundamental problems(hardware initialization, serial port configuration,
Quoted 1 line
Quoted 1 line
serial port selection, who knows???). Since we don't know anything
about your board, we cannot help further.
Please use plain text formatting, not HTML. Your quoting will be more readable and it won't annoy us curmudgeons.
Quoted 11 lines
Hi ! Now im being able to get print on the serial console. My board is workin fine . its at91sam9261. the problem is something else. i have written a driver
spi-new.cfor the SPI interface using BUS 1 . now though this driver is getting compiled but its not getting executed when my board boots up . i have modified the following to u-boot source tree.
1) changedMakefilein /drivers/spi/ and added a line
COBJS-$(CONFIG_ATMEL_SPI) +=spi-new.o
2) changed config file in /include/configs/at91sam9261ek.h added a line
#CONFIG_ATMEL_SPI1
I see you actually used "#define"
Quoted 2 lines
though my init function is getting executed in the board file located
at /board/atmel/at91sam9261ek/at91sam9261ek.c
OK, sounds like you succeeded.
Quoted 3 lines
my driver code is not gettung executed when my board boots up.
can anyone let me know where else to change to add a new driver in
u-boot so tat ur board recognizes it.
Since you have succeeded in inserting your new driver in your u-boot image, it is available. You need to browse the SPI functionality/framework in u-boot to figure out how to plug your new SPI driver into the existing code and how to use it.
The statement "my driver code is not gettung[sic] executed when my board boots up" is too vague for us to address. What do you expect u-boot / your driver to do when it boots up (that it isn't already doing)?
Quoted 2 lines
warm regards,
Ravi Kulkarni.
Good luck,
gvb
Quoted 1 line
Quoted 1 line
Please use plain text formatting, not HTML. ?Your quoting will be more readable and it won't annoy us curmudgeons.
sorry was replying by my gmail. now its plain text . I hope it doesnt annoy u anymore.
Quoted 4 lines
Quoted 4 lines
I see you actually used "#define"
yeah its #define CONFIG_ATMEL_SPI 1 . sorry for typing mistake .
Quoted 4 lines
Quoted 4 lines
?though my init function is getting executed in the board file located at /board/atmel/at91sam9261ek/at91sam9261ek.c
OK, sounds like you succeeded.
yeah i used the printf("U-Boot Ravi at %s:%d!\n", __FILE__,__LINE__); to confirm . it printed .
Quoted 6 lines
Quoted 6 lines
my driver code is not gettung executed when my board boots up.
?can anyone let me ?know where else to change to add a new driver in u-boot so tat ?ur board recognizes it.Since you have succeeded in inserting your new driver in your u-boot image, it is available. ?You need to browse the SPI functionality/framework in u-boot to figure out how to plug your new SPI driver into the existing code and how to use it.
yeah, wil try to do tat. .
Quoted 2 lines
Quoted 2 lines
The statement "my driver code is not gettung[sic] executed when my board boots up" is too vague for us to address. ?What do you expect u-boot / your driver to do when it boots up (that it isn't already doing)?
what i meant by the above statement is tat when i insert printf in my driver code im not getting anything printed on console . so i have to figure how to plug new spi driver into existing code and use it. thanks .
warm regards,
Ravi Kulkarni.