EDAC: AMD8131 driver Kconfig and Makefile - errors
Quoted 41 lines · Harry Ciao
From: Harry Ciao <[email protected]>
Subject: [v2 PATCH 7/7] EDAC: AMD8131 driverKconfigandMakefile
To: [email protected], [email protected]
Date: Tuesday, March 10, 2009, 9:25 PM
IntroduceKconfigandMakefile
options for AMD8131 EDAC driver.Signed-off-by Harry Ciao <[email protected]>--- drivers/edac/Kconfig | 7 +++++++ drivers/edac/Makefile | 1 + 2 files changed, 8 insertions(+), 0 deletions(-)drivers/edac/Kconfig +0
-0@@ -181,4 +181,11 @@ config EDAC_AMD8111 Support for error detection andcorrection on the
AMD8111 HyperTransport I/O Hub
chip.+config
EDAC_AMD8131
+ tristate "AMD8131 HyperTransport PCI-X Tunnel"
+ depends onEDAC_MM_EDAC&& PCI
+ help
+ Support for error detection and correction on the
+ AMD8131 HyperTransport PCI-X Tunnel chip.drivers/edac/Kconfig +1
-0+ endif # EDACdrivers/edac/Makefile +0
-0@@ -35,4 +35,5 @@ obj-$(CONFIG_EDAC_MPC85XX)+= mpc85xx_edac.o
Quoted 11 lines
obj-$(CONFIG_EDAC_MV64X60)
+= mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL)
+= cell_edac.o
obj-$(CONFIG_EDAC_AMD8111)
+= amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131)
+= amd8131_edac.oSignature · 1 line
1.5.6.2
Andrew,
I notice that the above is different from what is now in mmotm.
In the patches posted, amd8111 module IS and the amd8131 modules is NOT, configured in the Makefile to be compiled.
In the mmotm version NEITHER is configured to be compiled. When I do add them I get the following errors:
drivers/edac/amd8111_edac.c: In function ‘amd8111_lpc_bridge_init’:drivers/edac/amd8111_edac.c:259: error: implicit declaration of function ‘__do_inb’ drivers/edac/amd8111_edac.c:273: error: implicit declaration of function ‘__do_outb’drivers/edac/amd8111_edac.c: In function ‘amd8111_dev_probe’:drivers/edac/amd8111_edac.c:383: warning: passing argument 2 of ‘edac_device_alloc_ctl_info’ discards qualifiers from pointer target type
and
drivers/edac/amd8111_edac.c: In function ‘amd8111_lpc_bridge_init’:drivers/edac/amd8111_edac.c:259: error: implicit declaration of function ‘__do_inb’ drivers/edac/amd8111_edac.c:273: error: implicit declaration of function ‘__do_outb’drivers/edac/amd8111_edac.c: In function ‘amd8111_dev_probe’:drivers/edac/amd8111_edac.c:383: warning: passing argument 2 of ‘edac_device_alloc_ctl_info’ discards qualifiers from pointer target type
I assume that is why it is currently not enabled. I just didn't see it mentioned anywhere, but you are probably aware of it.
doug t
Quoted 81 lines · Doug Thompson
Quoted 53 lines · Harry Ciao
From: Harry Ciao <[email protected]>
Subject: [v2 PATCH 7/7] EDAC: AMD8131 driverKconfigandMakefile
To: [email protected], [email protected]
Date: Tuesday, March 10, 2009, 9:25 PM
IntroduceKconfigandMakefile
options for AMD8131 EDAC driver.Signed-off-by Harry Ciao <[email protected]>--- drivers/edac/Kconfig | 7 +++++++ drivers/edac/Makefile | 1 + 2 files changed, 8 insertions(+), 0 deletions(-)drivers/edac/Kconfig +0
-0@@ -181,4 +181,11 @@ config EDAC_AMD8111 Support for error detection andcorrection on the
AMD8111 HyperTransport I/O Hub
chip.drivers/edac/Kconfig +2
-0+config EDAC_AMD8131 + tristate "AMD8131 HyperTransport PCI-XTunnel"
drivers/edac/Kconfig +3
-0+ depends on EDAC_MM_EDAC && PCI + help + Support for error detection andcorrection on the
+ AMD8131 HyperTransport PCI-X
Tunnel chip.drivers/edac/Kconfig +1
-0+ endif # EDACdrivers/edac/Makefile +1
-0@@ -35,4 +35,5 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac.o obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o +obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.oSignature · 2 lines
-- 1.5.6.2Andrew,
I notice that the above is different from what is now in mmotm.
In the patches posted, amd8111 module IS and the amd8131 modules is NOT, configured in the
Makefileto be compiled.In the mmotm version NEITHER is configured to be compiled. When I do add them I get the following errors:
drivers/edac/amd8111_edac.c: In function ‘amd8111_lpc_bridge_init’:drivers/edac/amd8111_edac.c:259: error: implicit declaration of function ‘__do_inb’drivers/edac/amd8111_edac.c:273: error: implicit declaration of function ‘__do_outb’drivers/edac/amd8111_edac.c: In function ‘amd8111_dev_probe’:drivers/edac/amd8111_edac.c:383: warning: passing argument 2 of ‘edac_device_alloc_ctl_info’ discards qualifiers from pointer target typeand
drivers/edac/amd8111_edac.c: In function ‘amd8111_lpc_bridge_init’:drivers/edac/amd8111_edac.c:259: error: implicit declaration of function ‘__do_inb’drivers/edac/amd8111_edac.c:273: error: implicit declaration of function ‘__do_outb’drivers/edac/amd8111_edac.c: In function ‘amd8111_dev_probe’:drivers/edac/amd8111_edac.c:383: warning: passing argument 2 of ‘edac_device_alloc_ctl_info’ discards qualifiers from pointer target type
Quoted 5 lines
I assume that is why it is currently not enabled. I just didn't see it mentioned anywhere, but you are probably aware of it.
doug t
Doug,
You're right!
the __do_inb() and __do_outb() are defined in the io.h under arch/powerpc/, rather than that under include/linux/:
cao@cao-desktop:/work/community/linux-2.6/arch/powerpc$ grep do_inb * -r include/asm/io.h:#define __do_inb(port) _rec_inb(port) include/asm/io.h:#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
I stupidly changed the asm/io.h to linux/io.h when I saw following warnings from checkpatch.pl:
cao@cao-desktop:/work/community/linux-2.6$ scripts/checkpatch.pl patches/0002-EDAC-AMD8111-driver-source-file.patch WARNING: Use #include <linux/io.h> instead of <asm/io.h> #48: FILE: drivers/edac/amd8111_edac.c:30: +#include <asm/io.h>
total: 0 errors, 1 warnings, 595 lines checked
patches/0002-EDAC-AMD8111-driver-source-file.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
I guess by including <asm/io.h> back you won't see the error of implicit declaration of __do_inb() any more.(On a side note, what should we do with the checkpatch.pl to eliminate this false-positive warning?)
The second warning about passing argument 2 for edac_device_alloc_ctl_info discarding qualifiers is resulted from the fact that now the 2nd parameter is of type of char *, whereas I am passing a const char *, after I remove the "const" qualifier from amd8111_dev_info.ctl_name, this warning can be eliminated.
I will send out new version patches for amd8111_edac.[ch], please help verify them again on your side, thanks!!
Best regards,
Harry