Skip to contentSkip to conversation

Need help about quemu + u-root + x86 Linux kernel running in sd card like quemu + grub2 + x86 Linux kernel way

HELP 黄蓉刚 2 participants 2 messages Nov 19, 2022 – Dec 17, 2022

lore
Share & tools
lore

黄蓉刚

author
#0 lore raw

November 19, 2022

Dear All,

Execute me. I need your help.

I am interested in qemu x86_64 and I have a problem that I want to input u-boot into a sdcard file and start Linux with the sdcard file, like grub-install(grub2) way.

The grub2 method (Method 1) is right, I want to use u-boot method (Method 2) to bootloader Linux kernel in x86. I guess that it needs write a program like grub-install to reach this aim.

Please help me to give a clear way like grub-install way. Thanks!

My steps:

cd ~/Code/kernel_sources

git clone https://github.com/qemu/u-boot.git

git checkout v2022.10-rc4

git reset --hard

cd ~/Code/kernel_sources/u-boot

export ARCH=arm

export CROSS_COMPILE=arm-linux-gnueabi-

make distclean

make vexpress_ca9x4_defconfig

make -j4 all

# Busybox and rootfs is ready

...

# Kernel

cd ~/Code/kernel_sources/linux-4.19.256

export ARCH=arm

export CROSS_COMPILE=arm-linux-gnueabi-

make clean

make bzImage -j2 ARCH=arm CROSS_COMPLIE=arm-linux-gnueabi-

make dtbs

cd ~/Code/kernel_sources/linux-4.19.256

# Create rootfs.img

sudo sh -c 'find . | cpio -o --format=newc > ../initrd.img'

# Common disk method

cd ~/Code/kernel_sources/linux-4.19.256

rm -rf busybox_u-boot_64M_4.19.256.img

dd if=/dev/zero of=busybox_u-boot_64M_4.19.256.img bs=1 seek=63MiB count=1024

cd ~/Code/kernel_sources/linux-4.19.256

sudo parted busybox_u-boot_64M_4.19.256.img

mklabel msdos

mkpart primary ext4 2MiB 98%

toggle 1 boot

print

quit

sudo kpartx -a busybox_u-boot_64M_4.19.256.img

echo y | sudo mkfs.ext4 /dev/mapper/loop0p1

cd ~/Code/kernel_sources/linux-4.19.256

sudo rm -rf /mnt/rootfs/*

sudo mkdir -p /mnt/rootfs/boot/

sudo cp arch/arm/boot/zImage /mnt/rootfs/boot/zImage

sudo cp initrd.img /mnt/rootfs/boot/initrd.img

# Method 1(Grub2):

# Common disk method + Grub method

cd ~/Code/kernel_sources/linux-4.19.256/

sudo losetup /dev/loop0 busybox_grub_2G_4.19.256.img

sudo kpartx -a /dev/loop0

sudo grub-install --target=i386-pc --recheck --no-floppy --boot-directory=/mnt/rootfs/boot/ /dev/loop0

cd /mnt/rootfs/boot/grub/

sudo sh -c "cat > grub.cfg << EOF

set timeout=5

set default=0

menuentry 'Linux 4.19.256, busybox, root=/dev/sda2' {

linux /boot/zImage root=/dev/sda2

initrd /boot/initrd.img

}

menuentry 'Reboot' {

reboot

}

menuentry 'Shutdown' {

halt

}

EOF"

cd ~/Code/kernel_sources/linux-4.19.256

qemu-system-x86_64 -m 1024M -drive format=raw,file=busybox_grub_2G_4.19.256.img -curses

It can run successfully.

# Method 2(U-boot):

# Common disk method + U-boot method

cd ~/Code/kernel_sources/linux-4.19.256

dd if=~/Code/kernel_sources/u-boot/u-boot.bin of=busybox_u-boot_64M_4.19.256_usb.img conv=notrunc bs=1

cd ~/Code/kernel_sources/linux-4.19.256

qemu-system-arm -M vexpress-a9 \

     -nographic \

     -m 1024M \

     -sd ./busybox_u-boot_64M_4.19.256.img

...

It's can't start u-boot.

How use u-boot in sdcard file like grub-install?

Thanks!

Sincerely,

Ronggang Huang

2022.11.19

#1 lore raw

Hi,

Quoted 180 lines · 黄蓉刚

November 19, 2022

Dear All,

Execute me. I need your help.

I am interested in qemu x86_64 and I have a problem that I want to input u-boot into a sdcard file and start Linux with the sdcard file, like grub-install(grub2) way.

The grub2 method (Method 1) is right, I want to use u-boot method (Method 2) to bootloader Linux kernel in x86. I guess that it needs write a program like grub-install to reach this aim.

Please help me to give a clear way like grub-install way. Thanks!

My steps:

cd ~/Code/kernel_sources

git clone https://github.com/qemu/u-boot.git

git checkout v2022.10-rc4

git reset --hard

cd ~/Code/kernel_sources/u-boot

export ARCH=arm

export CROSS_COMPILE=arm-linux-gnueabi-

make distclean

make vexpress_ca9x4_defconfig

make -j4 all

# Busybox and rootfs is ready

...

# Kernel

cd ~/Code/kernel_sources/linux-4.19.256

export ARCH=arm

export CROSS_COMPILE=arm-linux-gnueabi-

make clean

make bzImage -j2 ARCH=arm CROSS_COMPLIE=arm-linux-gnueabi-

make dtbs

cd ~/Code/kernel_sources/linux-4.19.256

# Create rootfs.img

sudo sh -c 'find . | cpio -o --format=newc > ../initrd.img'

# Common disk method

cd ~/Code/kernel_sources/linux-4.19.256

rm -rf busybox_u-boot_64M_4.19.256.img

dd if=/dev/zero of=busybox_u-boot_64M_4.19.256.img bs=1 seek=63MiB count=1024

cd ~/Code/kernel_sources/linux-4.19.256

sudo parted busybox_u-boot_64M_4.19.256.img

mklabel msdos

mkpart primary ext4 2MiB 98%

toggle 1 boot

print

quit

sudo kpartx -a busybox_u-boot_64M_4.19.256.img

echo y | sudo mkfs.ext4 /dev/mapper/loop0p1

cd ~/Code/kernel_sources/linux-4.19.256

sudo rm -rf /mnt/rootfs/*

sudo mkdir -p /mnt/rootfs/boot/

sudo cp arch/arm/boot/zImage /mnt/rootfs/boot/zImage

sudo cp initrd.img /mnt/rootfs/boot/initrd.img

# Method 1(Grub2):

# Common disk method + Grub method

cd ~/Code/kernel_sources/linux-4.19.256/

sudo losetup /dev/loop0 busybox_grub_2G_4.19.256.img

sudo kpartx -a /dev/loop0

sudo grub-install --target=i386-pc --recheck --no-floppy --boot-directory=/mnt/rootfs/boot/ /dev/loop0

cd /mnt/rootfs/boot/grub/

sudo sh -c "cat > grub.cfg << EOF

set timeout=5

set default=0

menuentry 'Linux 4.19.256, busybox, root=/dev/sda2' {

linux /boot/zImage root=/dev/sda2

initrd /boot/initrd.img

}

menuentry 'Reboot' {

reboot

}

menuentry 'Shutdown' {

halt

}

EOF"

cd ~/Code/kernel_sources/linux-4.19.256

qemu-system-x86_64 -m 1024M -drive format=raw,file=busybox_grub_2G_4.19.256.img -curses

It can run successfully.

# Method 2(U-boot):

# Common disk method + U-boot method

cd ~/Code/kernel_sources/linux-4.19.256

dd if=~/Code/kernel_sources/u-boot/u-boot.bin of=busybox_u-boot_64M_4.19.256_usb.img conv=notrunc bs=1

cd ~/Code/kernel_sources/linux-4.19.256

qemu-system-arm -M vexpress-a9 \

     -nographic \

     -m 1024M \

     -sd ./busybox_u-boot_64M_4.19.256.img
Quoted 6 lines

...

It's can't start u-boot.

How use u-boot in sdcard file like grub-install?

The instructions in the documentation work OK for me:

https://u-boot.readthedocs.io/en/latest/board/emulation/qemu-arm.html

Can you try that first and then go from there?

Regards,
Simon