Skip to contentSkip to conversation

linux-ia64 crashes with two itanium2 plugged

DISCUSSION trouthy_61x65 3 participants 3 messages Jan 29, 2010 – Feb 3, 2010

lore
Share & tools
lore
#0 lore raw

Hi all, I try to install a Linux SLESuse10 or Debian5 onto a computer with Supermicro's motheboard and Itanium2 based. With once processor Linux-ia64 perfectly runs up but when i plug the second processor the O.S. crashes. Then i tried to re-install it or boot with failsafe mode without good result; during the hardware detect or after it it crashes and reboot. I had to unplug the second processor and remake the entire installation. Actually I take some informations about re-compilation of the kernel but i found nothing about that problem. Has anybody got any idea? Thanks (I watched a message during the crashes such "number of slaves reached...")

Signature · 2 lines
View this message in context: http://old.nabble.com/linux-ia64-crashes-with-two-itanium2-plugged-tp27379296p27379296.html
Sent from the linux-ia64 mailing list archive at Nabble.com.
#1 lore raw

Hello,

Sorry, really no idea. By chance, is there an updated firmware for your platform that would fix this issue?

I run Debian "Squeeze" Testing without a problem on my hp workstation zx6000 sporting two "McKinley" Itanium² CPUs.

Regards,

Emeric

2010/2/2 trouthy_61x65 <[email protected]>:

Quoted 20 lines

Hi all, I try to install a Linux SLESuse10 or Debian5 onto a computer with
Supermicro's motheboard and Itanium2 based. With once processor Linux-ia64
perfectly runs up but when i plug the second processor the O.S. crashes.
Then i tried to re-install it or boot with failsafe mode without good
result; during the hardware detect or after it it crashes and reboot. I had
to unplug the second processor and remake the entire installation. Actually
I take some informations about re-compilation of the kernel but i found
nothing about that problem. Has anybody got any idea? Thanks (I watched a
message during the crashes such "number of slaves reached..." i also
replaced the twin itanium2 proc)
--
View this message in context: http://old.nabble.com/linux-ia64-crashes-with-two-itanium2-plugged-tp27379296p27379296.html
Sent from the linux-ia64 mailing list archive at Nabble.com.

--
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

#2 lore raw
In reply to trouthy_61x65
Quoted 11 lines · On Tuesday 02 February 2010 12:36:33 am trouthy_61x65 wrote:

Hi all, I try to install a Linux SLESuse10 or Debian5 onto a computer with Supermicro's motheboard and Itanium2 based. With once processor Linux-ia64 perfectly runs up but when i plug the second processor the O.S. crashes. Then i tried to re-install it or boot with failsafe mode without good result; during the hardware detect or after it it crashes and reboot. I had to unplug the second processor and remake the entire installation. Actually I take some informations about re-compilation of the kernel but i found nothing about that problem. Has anybody got any idea? Thanks (I watched a message during the crashes such "number of slaves reached..." i also replaced the twin itanium2 proc)

If you can collect a serial console log, or write down the OS crash information by hand, or even take a video of the crash, it will help give us some idea of where to look.

Bjorn