Skip to contentSkip to conversation

script to perform dead gateway detection

LARTC Denis Fedorishenko 1 participant 1 message Mar 11, 2004

lore
Share & tools
lore
#0 lore raw

Hello Daniel,

Thursday, March 11, 2004, 4:55:15 AM, you wrote:

Maybe better just to use
ping -t 2 anyhost

:)

DC> How about iptables -A OUTPUT --destination ${GATEWAY_1} -j TTL --set-ttl DC> 2 (or 1, I'm not sure if the ttl dec is done at all with output chains)

DC> So, after the next hop, if the IP address isn't GATEWAY_1, then the DC> packet is dead in the water.

Quoted 25 lines · DC> Ming-Ching Tiew wrote:
Quoted 25 lines

I am also having some difficulty in doing dead gateway detection using a shell script :-

Basically I am using ping -c 1 ${GATEWAY_1} If it times out, I supposed it got into error, so it is probably time for me to change route.

However, even if the ping comes back, it does not mean the GATEWAY is alive as my nexthop; this is because I figured that the packet could have made a U-turn via the one of the alive links to come back to answer the ping request, ie the gateway is alive for a packet on the external network, but the gateway is still down from inside point of view, and this can happen due to a faulty connection between by second link IP and the second link gateway !

Without patching the kernel to do dead gateway detection, how do I find out if a particular gateway is dead as my NEXTHOP ?

Quoted 4 lines
Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://lartc.org/

DC> _______________________________________________
DC> LARTC mailing list / [email protected]
DC> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 6 lines
Best regards,
 Denis                            mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/