Announce: kdb v4.4 is available for kernel 2.6.16
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
KDB (Linux Kernel Debugger) has been updated for kernel 2.6.16.
ftp://oss.sgi.com/projects/kdb/download/v4.4/ ftp://ftp.ocs.com.au/pub/mirrors/oss.sgi.com/projects/kdb/download/v4.4/
Note: Due to a spam attack, the [email protected] mailing list is now subscriber only. If you reply to this mail, you may wish to trim [email protected] from the cc: list.
Thanks to Nathan Scott for updating KDB while I was on holiday.
Current versions are :-
kdb-v4.4-2.6.16-common-1.bz2
kdb-v4.4-2.6.16-i386-1.bz2
kdb-v4.4-2.6.16-ia64-1.bz2
Changelog extract since kdb-v4.4-2.6.15-common-1.
2006-03-21 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-common-1.
2006-03-14 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc6-common-1.
2006-02-28 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc5-common-1.
2006-02-20 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc4-common-1.
2006-02-06 Keith Owens <[email protected]>
* Change CONFIG_CRASH_DUMP to CONFIG_LKCD.
* Remove obsolete kdb_notifier_list.
* kdb v4.4-2.6.16-rc2-common-2.
2006-02-06 Keith Owens <[email protected]>
* Add xpcusers command. Dean Nelson, SGI.
* kdb v4.4-2.6.16-rc2-common-1.
2006-02-02 Keith Owens <[email protected]>
* Check if we have a console before using it for KDB.
* kdb v4.4-2.6.16-rc1-common-3.
2006-02-01 Keith Owens <[email protected]>
* Add option 'R' to the pid command to reset to the original task.
* Include 'pid R' in archkdb* commands to reset up the original failing task. Users may have switched to other cpus and/or tasks before issuing archkdb.
* Compile fix for kdbm_pg.c on i386.
* kdb v4.4-2.6.16-rc1-common-2.
2006-01-18 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-rc1-common-1.
2006-01-11 Keith Owens <[email protected]>
* Plug a timing race between KDB_ENTER_SLAVE and KDB_ENTER, and allow the cpu command to switch to a slave cpu.
* KDB_REASON_SILENT now waits for other cpus, to avoid spurious NMI events that were seen on some Xeon systems.
* kdb v4.4-2.6.15-common-3.
2006-01-08 Keith Owens <[email protected]>
* kdb mainline invokes DIE_KDEBUG_ENTER and DIE_KDEBUG_LEAVE via notify_die.
* Move xpc debug support from xpc to mainline kdb.
* kdbm_cm.c: check if file_lock_operations or lock_manager_operations are set before dereferencing them. Felix Blyakher, SGI.
* kdb v4.4-2.6.15-common-2.
Changelog extract since kdb-v4.4-2.6.15-i386-1.
2006-03-21 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-i386-1.
2006-03-14 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc6-i386-1.
2006-02-28 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc5-i386-1.
2006-02-20 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc4-i386-1.
2006-02-06 Keith Owens <[email protected]>
* Change CONFIG_CRASH_DUMP to CONFIG_LKCD.
* kdb v4.4-2.6.16-rc2-i386-2.
2006-02-06 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-rc2-i386-1.
2006-01-18 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-rc1-i386-1.
2006-01-08 Keith Owens <[email protected]>
* Add DIE_KDEBUG_ENTER and DIE_KDEBUG_LEAVE to notify_die.
* kdb v4.4-2.6.15-i386-2.
Changelog extract since kdb v4.4-2.6.15-ia64-1.
2006-03-21 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-ia64-1.
2006-03-14 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc6-ia64-1.
2006-02-28 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc5-ia64-1.
2006-02-20 Nathan Scott <[email protected]>
* kdb v4.4-2.6.16-rc4-ia64-1.
2006-02-07 Keith Owens <[email protected]>
* Change kdb_running_process_save from a static array to a pointer. gcc 4.0 objects to forward declarations for arrays with an incomplete type.
* kdb v4.4-2.6.16-rc2-ia64-3.
2006-02-06 Keith Owens <[email protected]>
* Change CONFIG_CRASH_DUMP to CONFIG_LKCD.
* kdb v4.4-2.6.16-rc2-ia64-2.
2006-02-06 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-rc2-ia64-1.
2006-02-01 Keith Owens <[email protected]>
* Handlers: check that the task is in kernel space before looking at the thread_info bits.
* Expose kdb_running_process_save[] so 'pid R' can get the original process, even when the MCA/INIT handlers are being used.
* kdb v4.4-2.6.16-rc1-ia64-3.
2006-01-19 Keith Owens <[email protected]>
* Add back some kdb changes to xpc_main that were lost due to a patch conflict.
* kdb v4.4-2.6.16-rc1-ia64-2.
2006-01-18 Keith Owens <[email protected]>
* kdb v4.4-2.6.16-rc1-ia64-1.
2006-01-10 Keith Owens <[email protected]>
* Build kdba_pod for generic as well as sn2 kernels and test at run time if the platform is sn2.
* kdb v4.4-2.6.15-ia64-3.
2006-01-08 Keith Owens <[email protected]>
* Convert xpc to use DIE_KDEBUG_ENTER and DIE_KDEBUG_LEAVE.
* Add debug option for xpc.
* break.b always sets a debug trap number of 0 , so pass that to kdb as well as the normal kdb traaps.
* kdb v4.4-2.6.15-ia64-2.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Exmh version 2.1.1 10/15/1999
iD8DBQFEH5Y8i4UHNye0ZOoRAgxfAKDEFyGyiC0MqpZf3g++ZcyWnkZm4QCfdGpB vrKA3BN4aKCI/MDX6bJTme0ípm
-----END PGP SIGNATURE-----
Quoted 11 lines · Keith Owens (on Tue, 21 Mar 2006 16:59:24 +1100) wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1KDB (Linux Kernel Debugger) has been updated for kernel 2.6.16.
ftp://oss.sgi.com/projects/kdb/download/v4.4/ ftp://ftp.ocs.com.au/pub/mirrors/oss.sgi.com/projects/kdb/download/v4.4/
Note: Due to a spam attack, the [email protected] mailing list is now subscriber only. If you reply to this mail, you may wish to trim [email protected] from the cc: list.
Updates to kdb v4.4-2.6.16-{common,i386,ia64}-1, moving to -2. Mainly to get more forceful with stuck cpus on IA64, where the "non-maskable" interrupt is masked by local_irq_disable().
We finally get decent backtraces on stuck IA64 cpus. It took a long time to get there, KDB could not change until the base kernel could cope with INIT and recover correctly.
2006-03-22 Keith Owens <[email protected]>
* Add some more xpc flags. Dean Nelson, SGI.
* Replace open coded counter references with atomic_read().
* Pass early_uart_console to early_uart_setup(). Francois Wellenreiter, Bull.
* Replace open code with for_each_online_cpu().
* If cpus do not come into kdb after a few seconds then let architectures send a more forceful interrupt.
* Close a timing race with KDB_ENTER_SLAVE.
* kdb v4.4-2.6.16-common-2.
2006-03-24 Keith Owens <[email protected]>
* Define a dummy kdba_wait_for_cpus().
* kdb v4.4-2.6.16-i386-2.
2006-03-24 Keith Owens <[email protected]>
* Use INIT to interrupt cpus that do not respond to a normal kdb IPI.
* Remove KDBA_MCA_TRACE from arch/ia64/kernel/mca.c.
* kdb v4.4-2.6.16-ia64-2.
Quoted 12 lines · Keith Owens
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1KDB (Linux Kernel Debugger) has been updated for kernel 2.6.16.
ftp://oss.sgi.com/projects/kdb/download/v4.4/ ftp://ftp.ocs.com.au/pub/mirrors/oss.sgi.com/projects/kdb/download/v4.4/
Note: Due to a spam attack, the [email protected] mailing list is now subscriber only. If you reply to this mail, you may wish to trim [email protected] from the cc: list.
Quoted 7 lines
Thanks to Nathan Scott for updating KDB while I was on holiday.
Current versions are :-
kdb-v4.4-2.6.16-common-1.bz2
kdb-v4.4-2.6.16-i386-1.bz2
kdb-v4.4-2.6.16-ia64-1.bz2
Thanks for this new version, however I'm looking forward to see kdb maintained also for the x86_64 architecture. Currently I have got as far as forward-porting it to a level where it "works" except for one annoying issue where setjmp/longjmp looks to be broken:
[0]more> q
invalid opcode: 0000 [1] SMP
kdb: Debugger re-entered on cpu 0, new reason = 5
Attempting to abort command and recover
invalid opcode: 0000 [2] SMP
kdb: Debugger re-entered on cpu 0, new reason = 5
Attempting to abort command and recover
invalid opcode: 0000 [3] SMP
kdb: Debugger re-entered on cpu 0, new reason = 5
Attempting to abort command and recover
invalid opcode: 0000 [4] SMP
kdb: Debugger re-entered on cpu 0, new reason = 5
Attempting to abort command and recover
invalid opcode: 0000 [5] SMP
[...]
An inescapable loop.
Kernel configured with CONFIG_FRAME_POINTER=y,
gcc version 3.3.5 (Debian 1:3.3.5-13).
ffffffff8032fc90 <kdba_setjmp>:
ffffffff8032fc90: 55 push %rbp ffffffff8032fc91: 48 89 e5 mov %rsp,%rbp ffffffff8032fc94: 48 89 5f 00 mov %rbx,0x0(%rdi) ffffffff8032fc98: 48 89 6f 08 mov %rbp,0x8(%rdi) ffffffff8032fc9c: 4c 89 67 10 mov %r12,0x10(%rdi) ffffffff8032fca0: 4c 89 6f 18 mov %r13,0x18(%rdi) ffffffff8032fca4: 4c 89 77 20 mov %r14,0x20(%rdi) ffffffff8032fca8: 4c 89 7f 28 mov %r15,0x28(%rdi) ffffffff8032fcac: 48 8d 54 24 10 lea 0x10(%rsp),%rdx ffffffff8032fcb1: 48 89 57 30 mov %rdx,0x30(%rdi) ffffffff8032fcb5: 48 8b 04 24 mov (%rsp),%rax ffffffff8032fcb9: 48 89 47 38 mov %rax,0x38(%rdi) ffffffff8032fcbd: 65 8b 04 25 24 00 00 mov %gs:0x24,%eax ffffffff8032fcc4: 00 ffffffff8032fcc5: 48 c7 c1 c0 86 57 80 mov $0xffffffff805786c0,%rcx ffffffff8032fccc: 48 98 cltq ffffffff8032fcce: 8b 14 81 mov (%rcx,%rax,4),%edx ffffffff8032fcd1: 80 ce 04 or $0x4,%dh ffffffff8032fcd4: 89 14 81 mov %edx,(%rcx,%rax,4) ffffffff8032fcd7: 31 c0 xor %eax,%eax ffffffff8032fcd9: c9 leaveq ffffffff8032fcda: c3 retq ffffffff8032fcdb: 66 data16 ffffffff8032fcdc: 66 data16 ffffffff8032fcdd: 90 nop ffffffff8032fcde: 66 data16 ffffffff8032fcdf: 90 nop
ffffffff8032fce0 <kdba_longjmp>:
ffffffff8032fce0: 55 push %rbp ffffffff8032fce1: 48 89 e5 mov %rsp,%rbp ffffffff8032fce4: 48 8b 5f 00 mov 0x0(%rdi),%rbx ffffffff8032fce8: 48 8b 6f 08 mov 0x8(%rdi),%rbp ffffffff8032fcec: 4c 8b 67 10 mov 0x10(%rdi),%r12 ffffffff8032fcf0: 4c 8b 6f 18 mov 0x18(%rdi),%r13 ffffffff8032fcf4: 4c 8b 77 20 mov 0x20(%rdi),%r14 ffffffff8032fcf8: 4c 8b 7f 28 mov 0x28(%rdi),%r15 ffffffff8032fcfc: 85 f6 test %esi,%esi ffffffff8032fcfe: b8 01 00 00 00 mov $0x1,%eax ffffffff8032fd03: 0f 44 f0 cmove %eax,%esi ffffffff8032fd06: 89 f0 mov %esi,%eax ffffffff8032fd08: 48 8b 57 38 mov 0x38(%rdi),%rdx ffffffff8032fd0c: 48 8b 67 30 mov 0x30(%rdi),%rsp ffffffff8032fd10: ff e2 jmpq *%edx ffffffff8032fd12: c9 leaveq ffffffff8032fd13: c3 retq ffffffff8032fd14: 66 data16 ffffffff8032fd15: 66 data16 ffffffff8032fd16: 66 data16 ffffffff8032fd17: 90 nop ffffffff8032fd18: 66 data16 ffffffff8032fd19: 66 data16 ffffffff8032fd1a: 66 data16 ffffffff8032fd1b: 90 nop ffffffff8032fd1c: 66 data16 ffffffff8032fd1d: 66 data16 ffffffff8032fd1e: 66 data16 ffffffff8032fd1f: 90 nop
Signature · 3 lines
Dan Aloni, Linux specialist XIV LTD, http://www.xivstorage.com [email protected], [email protected], [email protected], [email protected]
Quoted 7 lines · Dan Aloni
Thanks for this new version, however I'm looking forward to see kdb maintained also for the
x86_64architecture. Currently I have got as far as forward-porting it to a level where it "works" except for one annoying issue where setjmp/longjmp looks to be broken:Kernel configured with
CONFIG_FRAME_POINTER=y,
I've not tried latest kdb, but you should find the patch below still works (removing that unnecessary KDB_STATE_SET(LONGJMP) is probably irrelevant, just something I did on the way, and which does no harm).
Hugh
arch/x86_64/kdb/kdbasupport.c +3 -3
@@ -1035,14 +1004,15 @@ kdba_setjmp(kdb_jmp_buf *jb) {#if defined(CONFIG_FRAME_POINTER ) __asm__("movq %rbx, (0*8)(%rdi);" -"movq %rbp, (1*8)(%rdi);" +"movq (%rsp), %rax;" +"movq %rax, (1*8)(%rdi);" "movq %r12, (2*8)(%rdi);" "movq %r13, (3*8)(%rdi);" "movq %r14, (4*8)(%rdi);" "movq %r15, (5*8)(%rdi);" "leaq 16(%rsp), %rdx;" "movq %rdx, (6*8)(%rdi);" -"movq (%rsp), %rax;" +"movq 8(%rsp), %rax;" "movq %rax, (7*8)(%rdi)" );#else /* CONFIG_FRAME_POINTER */ __asm__("movq %rbx, (0*8)(%rdi);"
@@ -1056,7 +1026,6 @@ kdba_setjmp(kdb_jmp_buf *jb)"movq (%rsp), %rax;" "movq %rax, (7*8)(%rdi)");#endif /* CONFIG_FRAME_POINTER */ -KDB_STATE_SET (LONGJMP );return 0 ; }
Quoted 10 lines · Dan Aloni
Quoted 5 lines
Current versions are :-
kdb-v4.4-2.6.16-common-1.bz2
kdb-v4.4-2.6.16-i386-1.bz2
kdb-v4.4-2.6.16-ia64-1.bz2Thanks for this new version, however I'm looking forward to see kdb maintained also for the
x86_64architecture. Currently I have got as far as forward-porting it to a level where it "works" except for one annoying issue where setjmp/longjmp looks to be broken:
Problem is due to the mixed C/asm implementation of setjmp/longjmp. Replace that with one written entirely in assemply and it will work. Here's mine:
/* setjmp / longjmp for the kernel.
* Inspired by the glibc version.
*/
.text .globl __kernel_setjmp .p2align 4 __kernel_setjmp: movq %rbx,0x0(%rdi) movq %rbp,0x8(%rdi) movq %r12,0x10(%rdi) movq %r13,0x18(%rdi) movq %r14,0x20(%rdi) movq %r15,0x28(%rdi) leaq 0x8(%rsp),%rdx movq %rdx,0x30(%rdi) movq (%rsp),%rax movq %rax,0x38(%rdi) xorq %rax,%rax ret .globl __kernel_longjmp __kernel_longjmp: movq 0x0(%rdi),%rbx movq 0x8(%rdi),%rbp movq 0x10(%rdi),%r12 movq 0x18(%rdi),%r13 movq 0x20(%rdi),%r14 movq 0x28(%rdi),%r15 test %esi,%esi mov $1,%eax cmove %eax,%esi mov %esi,%eax movq 0x38(%rdi),%rdx movq 0x30(%rdi),%rsp jmpq *%rdx
Quoted 7 lines · Joe Korty
Quoted 6 lines · Dan Aloni
Quoted 5 lines
Current versions are :-
kdb-v4.4-2.6.16-common-1.bz2
kdb-v4.4-2.6.16-i386-1.bz2
kdb-v4.4-2.6.16-ia64-1.bz2
Quoted 8 lines
Quoted 4 lines
Thanks for this new version, however I'm looking forward to see kdb maintained also for the
x86_64architecture. Currently I have got as far as forward-porting it to a level where it "works" except for one annoying issue where setjmp/longjmp looks to be broken:Problem is due to the mixed C/asm implementation of setjmp/longjmp. Replace that with one written entirely in assemply and it will work. Here's mine:
Thanks, it's obviously a better way to do it, I've tested it and made it into a patch:
arch/x86_64/kdb/kdbasupport.c +35 -65
@@ -1029,71 +1029,41 @@ kdba_clearsinglestep(struct pt_regs *reg regs->eflags &= ~EF_IE ; } -#ifdef KDB_HAVE_LONGJMP -int asmlinkage -kdba_setjmp (kdb_jmp_buf *jb) -{ -#if defined(CONFIG_FRAME_POINTER ) - __asm__("movq %rbx, (0*8)(%rdi);" -"movq %rbp, (1*8)(%rdi);" -"movq %r12, (2*8)(%rdi);" -"movq %r13, (3*8)(%rdi);" -"movq %r14, (4*8)(%rdi);" -"movq %r15, (5*8)(%rdi);" -"leaq 16(%rsp), %rdx;" -"movq %rdx, (6*8)(%rdi);" -"movq (%rsp), %rax;" -"movq %rax, (7*8)(%rdi)" ); -#else /* CONFIG_FRAME_POINTER */ - __asm__("movq %rbx, (0*8)(%rdi);" -"movq %rbp, (1*8)(%rdi);" -"movq %r12, (2*8)(%rdi);" -"movq %r13, (3*8)(%rdi);" -"movq %r14, (4*8)(%rdi);" -"movq %r15, (5*8)(%rdi);" -"leaq 8(%rsp), %rdx;" -"movq %rdx, (6*8)(%rdi);" -"movq (%rsp), %rax;" -"movq %rax, (7*8)(%rdi)" ); -#endif /* CONFIG_FRAME_POINTER */ -KDB_STATE_SET (LONGJMP ); -return 0 ; -} - -void asmlinkage -kdba_longjmp (kdb_jmp_buf *jb,int reason) -{ -#if defined(CONFIG_FRAME_POINTER ) - __asm__("movq (0*8)(%rdi),%rbx;" -"movq (1*8)(%rdi),%rbp;" -"movq (2*8)(%rdi),%r12;" -"movq (3*8)(%rdi),%r13;" -"movq (4*8)(%rdi),%r14;" -"movq (5*8)(%rdi),%r15;" -"test %esi,%esi;" -"mov $01,%eax;" -"cmove %eax,%esi;" -"mov %esi, %eax;" -"movq (7*8)(%rdi),%rdx;" -"movq (6*8)(%rdi),%rsp;" -"jmpq *%rdx" ); -#else /* CONFIG_FRAME_POINTER */ - __asm__("movq (0*8)(%rdi),%rbx;" -"movq (1*8)(%rdi),%rbp;" -"movq (2*8)(%rdi),%r12;" -"movq (3*8)(%rdi),%r13;" -"movq (4*8)(%rdi),%r14;" -"movq (5*8)(%rdi),%r15;" -"test %esi,%esi;" -"mov $01,%eax;" -"cmove %eax,%esi;" -"mov %esi, %eax;" -"movq (7*8)(%rdi),%rdx;" -"movq (6*8)(%rdi),%rsp;" -"jmpq *%rdx" ); -#endif /* CONFIG_FRAME_POINTER */ -} -#endif /* KDB_HAVE_LONGJMP */ +asm( +" .section .text\n" +" .globl kdba_setjmp\n" +" .p2align 4\n" +"kdba_setjmp:\n" +" movq %rbx,0x0(%rdi)\n" +" movq %rbp,0x8(%rdi)\n" +" movq %r12,0x10(%rdi)\n" +" movq %r13,0x18(%rdi)\n" +" movq %r14,0x20(%rdi)\n" +" movq %r15,0x28(%rdi)\n" +" leaq 0x8(%rsp),%rdx\n" +" movq %rdx,0x30(%rdi)\n" +" movq (%rsp),%rax\n" +" movq %rax,0x38(%rdi)\n" +" xorq %rax,%rax\n" +" ret\n" +" \n" +" .globl kdba_longjmp\n" +"kdba_longjmp:\n" +" movq 0x0(%rdi),%rbx\n" +" movq 0x8(%rdi),%rbp\n" +" movq 0x10(%rdi),%r12\n" +" movq 0x18(%rdi),%r13\n" +" movq 0x20(%rdi),%r14\n" +" movq 0x28(%rdi),%r15\n" +" test %esi,%esi\n" +" mov $1,%eax\n" +" cmove %eax,%esi\n" +" mov %esi,%eax\n" +" movq 0x38(%rdi),%rdx\n" +" movq 0x30(%rdi),%rsp\n" +" jmpq *%rdx\n" +" .previous\n" +);/* * kdba_enable_lbr
Signature · 3 lines
Dan Aloni, Linux specialist XIV LTD, http://www.xivstorage.com [email protected], [email protected], [email protected], [email protected]