sis190
Quoted 6 lines
Message du 17/06/05 00:36
De : "Francois Romieu" <[email protected]>Can you give a try at:
http://www.fr.zoreil.com/people/francois/misc/20050616-2.6.12-rc-sis190-test.patch
Quoted 9 lines
Please issue a few packets, say 4 to 8, and check your log after an ethtool -i eth0. Then wait for the Rx process to get stuck and issue the same ethtool command. You can probably lower
NUM_RX_DESCto 16 or 32 to minimize the output.--
Ueimor
I noticed that you remove NET_IP_ALIGN in sis190_alloc_rx_skb(), but not in sis190_try_rx_copy(); though the driver "worked" like yesterday...
BTW, i had to put the printk about RxdescRing in sis190_interrupt(), as i had Kernel Oops when in sis190_get_drvinfo().
# diff -puN sis190-20050616.c sis190.c --- sis190-20050616.c 2005-06-17 11:56:46.000000000 +0200 +++ sis190.c 2005-06-17 12:12:20.000000000 +0200 @@ -76,8 +76,8 @@ static int multicast_filter_limit = 32; /* MAC address length */ #define MAC_ADDR_LEN 6
-#define NUM_TX_DESC 64 /* Number of Tx descriptor registers */
-#define NUM_RX_DESC 64 /* Number of Rx descriptor registers */
+#define NUM_TX_DESC 16 /* Number of Tx descriptor registers */
+#define NUM_RX_DESC 16 /* Number of Rx descriptor registers */
#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc))
#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc))
#define RX_BUF_SIZE 1536 /* Rx Buffer size */
@@ -621,6 +621,8 @@ static irqreturn_t sis190_interrupt(int
void __iomem *ioaddr = tp->mmio_addr;
int handled = 0;
int boguscnt;+ unsigned int i;
+ u32 *u;
for (boguscnt = max_interrupt_work; boguscnt > 0; boguscnt--) {
u32 status = SIS_R32(IntrStatus);@@ -637,7 +639,8 @@ static irqreturn_t sis190_interrupt(int
SIS_W32(IntrStatus, status);
- printk(KERN_INFO "%s: status = %08x\n", dev->name, status);
+ if ( status != 0x20000000)
+ printk(KERN_INFO "%s: status = %08x\n", dev->name, status);
if ((status & LinkChange) && netif_running(dev)) {
printk(KERN_INFO "%s: link change\n", dev->name);
@@ -647,8 +650,29 @@ static irqreturn_t sis190_interrupt(int
if ((status & (TxQ0Int | RxQInt)) == 0)
break;- if (status & (RxQInt))
- sis190_rx_interrupt(dev, tp, ioaddr);
+ if (status & (RxQInt)) {
+ if ( tp->cur_rx > 29) {
+ printk(KERN_INFO "%s: dirty_rx=%ld cur_rx=%ld\n",
+ dev->name, tp->dirty_rx, tp->cur_rx);
+ u = (void *) tp->RxDescRing;
+ printk(KERN_INFO " PSize status addr size PSize status addr size\n");
+ for (i = 0; i < (NUM_RX_DESC / 2); i++) {+ printk(KERN_INFO "%02d:%08x %08x %08x %08x %08x %08x %08x %08x\n",
+ i, u[0], u[1], u[2], u[3], u[4], u[5], u[6], u[7]);
+ u += 8;
+ }
+ printk(KERN_INFO "%s: dirty_tx=%ld cur_tx=%ld\n",
+ dev->name, tp->dirty_tx, tp->cur_tx);
+ u = (void *) tp->TxDescRing;
+ printk(KERN_INFO " PSize status addr size PSize status addr size\n");
+ for (i = 0; i < (NUM_TX_DESC / 2); i++) {+ printk(KERN_INFO "%02d %08x %08x %08x %08x %08x %08x %08x %08x\n",
+ i, u[0], u[1], u[2], u[3], u[4], u[5], u[6], u[7]);
+ u += 8;
+ }
+ }
+ sis190_rx_interrupt(dev, tp, ioaddr);
+ }
if (status & (TxQ0Int)) {
spin_lock(&tp->lock);
@@ -1233,31 +1257,11 @@ static void sis190_get_drvinfo(struct ne
struct ethtool_drvinfo *info)
{
struct sis190_private *tp = netdev_priv(dev);- unsigned int i;
- u32 *u;
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->bus_info, pci_name(tp->pci_dev));- printk(KERN_INFO "%s: dirty_rx=%ld cur_rx=%ld\n",
- dev->name, tp->dirty_rx, tp->cur_rx);
- u = (void *) tp->RxDescRing;
- printk(KERN_INFO " PSize status addr size PSize status addr size\n");
- for (i = 0; i < (NUM_RX_DESC / 2); i++) {- printk(KERN_INFO "%02d:%08x %08x %08x %08x %08x %08x %08x %08x\n",
- i, u[0], u[1], u[2], u[3], u[4], u[5], u[6], u[7]);
- u += 8;
- }
- printk(KERN_INFO "%s: dirty_tx=%ld cur_tx=%ld\n",
- dev->name, tp->dirty_tx, tp->cur_tx);
- u = (void *) tp->TxDescRing;
- printk(KERN_INFO " PSize status addr size PSize status addr size\n");
- for (i = 0; i < (NUM_TX_DESC / 2); i++) {- printk(KERN_INFO "%02d %08x %08x %08x %08x %08x %08x %08x %08x\n",
- i, u[0], u[1], u[2], u[3], u[4], u[5], u[6], u[7]);
- u += 8;
- }
}
static struct ethtool_ops sis190_ethtool_ops = {
@@ -1311,6 +1315,7 @@ static int __devinit sis190_init_one(str
dev->open = sis190_open;
dev->hard_start_xmit = sis190_start_xmit;
dev->get_stats = sis190_get_stats;
+ SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops);
dev->stop = sis190_close;
dev->tx_timeout = sis190_tx_timeout;
dev->set_multicast_list = sis190_set_rx_mode;# dmesg [...] sis190 Gigabit Ethernet driver 1.2 loaded ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:04.0 to 64 0000:00:04.0: sis190 at ffffc20000004c00 (IRQ: 11), 00:11:2f:e9:42:70 eth0: Enabling Auto-negotiation. eth0: status = 22000000 eth0: mii 0x1f = 0000. eth0: mii lpa = 4501. eth0: Link on 1000 Mbps Full Duplex mode. eth0: no IPv6 routers present eth0: status = 0000000c eth0: status = 00000040 eth0: Rx status = 40040040 eth0: Rx PSize = 01010040 sk_buff[0]->tail = ffff810013381010 eth0: Rx status = c0000000 [...] eth0: status = 20000040 eth0: dirty_rx=30 cur_rx=30 PSize status addr size PSize status addr size 00:00000000 c0000000 13381010 00000600 00000000 c0000000 13847010 00000600 01:00000000 c0000000 1edcb810 00000600 00000000 c0000000 1b694810 00000600 02:00000000 c0000000 1b697010 00000600 00000000 c0000000 077c4810 00000600 03:00000000 c0000000 07e15010 00000600 00000000 c0000000 06e3e810 00000600 04:00000000 c0000000 1719e810 00000600 00000000 c0000000 1b69b810 00000600 05:00000000 c0000000 1b694010 00000600 00000000 c0000000 07741010 00000600 06:00000000 c0000000 065d8010 00000600 00000000 c0000000 07a84010 00000600 07:010100a6 76040040 13381810 00000600 00000000 c0000000 1f7c1010 00000600 eth0: dirty_tx=36 cur_tx=36 PSize status addr size PSize status addr size 00 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 01 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 02 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 03 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 04 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 05 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 06 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 07 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 eth0: Rx status = 76040040 eth0: Rx PSize = 010100a6 sk_buff[0]->tail = ffff810013381810 eth0: Rx status = c0000000 eth0: status = 0000000c eth0: status = 000000c0 eth0: dirty_rx=31 cur_rx=31 PSize status addr size PSize status addr size 00:00000000 c0000000 13381010 00000600 00000000 c0000000 13847010 00000600 01:00000000 c0000000 1edcb810 00000600 00000000 c0000000 1b694810 00000600 02:00000000 c0000000 1b697010 00000600 00000000 c0000000 077c4810 00000600 03:00000000 c0000000 07e15010 00000600 00000000 c0000000 06e3e810 00000600 04:00000000 c0000000 1719e810 00000600 00000000 c0000000 1b69b810 00000600 05:00000000 c0000000 1b694010 00000600 00000000 c0000000 07741010 00000600 06:00000000 c0000000 065d8010 00000600 00000000 c0000000 07a84010 00000600 07:00000000 c0000000 13381810 00000600 010100a6 76040040 1f7c1010 00000600 eth0: dirty_tx=37 cur_tx=37 PSize status addr size PSize status addr size 00 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 01 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 02 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 03 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 04 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 05 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 06 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 07 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 eth0: Rx status = 76040040 eth0: Rx PSize = 010100a6 sk_buff[0]->tail = ffff81001f7c1010 eth0: Rx status = c0000000 eth0: status = 0000000c eth0: status = 0000000c eth0: status = 0000000c eth0: status = 2000000c eth0: status = 2000000c eth0: status = 2000000c eth0: status = 2000000c eth0: status = 2000000c eth0: status = 2000000c eth0: status = 2000000c eth0: status = 2000000c [...]
No more traces about RxDescRing after that, as status & (RxQInt) was always 0 in sis190_interrupt().
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:2F:E9:42:70
inet addr:10.169.21.20 Bcast:10.169.23.255 Mask:255.255.252.0
inet6 addr: fe80::211:2fff:fee9:4270/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:87 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4833 (4.7 KiB) TX bytes:7364 (7.1 KiB)
Interrupt:11 Base address:0xdeadAfter that, i made various tries (most of them stupids).
I noticed that whith the default packet size, ping could work as long as i wanted.
So i removed the test "if (pkt_size < rx_copybreak) {" in sis190_try_rx_copy().
The driver now works "correctly" (ping, ssh, scp) as long as i want, but probably not in the way you want...
I don't understand how the Rx packets are managed when pkt_size is greater than rx_copybreak...
I also tried to force 10H, 10F, 100H, 100F autoneg off on the other card. All modes were working, but obviously something was wrong :
- 10H 0,4Mo/s both directions
- 10F 1,2Mo/s " " - 100H 5Mo/s " "
- 100F 1,2Mo/s and 0,3Mo/s
For 100F, sis190 reported "100 Mbps Half Duplex" and the other card 100 Full.
Autoneg on gived 100 Full detected and 5Mo/s both directions...
# diff -puN sis190-20050616.c sis190.c
--- sis190-20050616.c 2005-06-17 11:56:46.000000000 +0200
+++ sis190.c 2005-06-17 12:59:08.000000000 +0200
@@ -450,7 +450,6 @@ static inline int sis190_try_rx_copy(str
{
int ret = -1;- if (pkt_size < rx_copybreak) {
struct sk_buff *skb;
skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
@@ -463,7 +462,6 @@ static inline int sis190_try_rx_copy(str
sis190_give_to_asic(desc, rx_buf_sz);
ret = 0;
}
- }
return ret;}
@@ -637,7 +635,8 @@ static irqreturn_t sis190_interrupt(int
SIS_W32(IntrStatus, status);
- printk(KERN_INFO "%s: status = %08x\n", dev->name, status);
+ if ( status != 0x20000000)
+ printk(KERN_INFO "%s: status = %08x\n", dev->name, status);
if ((status & LinkChange) && netif_running(dev)) {
printk(KERN_INFO "%s: link change\n", dev->name);
@@ -647,8 +646,8 @@ static irqreturn_t sis190_interrupt(int
if ((status & (TxQ0Int | RxQInt)) == 0)
break;- if (status & (RxQInt))
- sis190_rx_interrupt(dev, tp, ioaddr);
+ if (status & (RxQInt))
+ sis190_rx_interrupt(dev, tp, ioaddr);
if (status & (TxQ0Int)) {
spin_lock(&tp->lock);
@@ -845,7 +844,7 @@ static void sis190_phy_task(void * data)
val = mdio_read(ioaddr, MII_LPA);
printk(KERN_INFO "%s: mii lpa = %04x.\n", dev->name, val);
for (p = reg31; p->ctl; p++) {
- if (val & p->val)
+ if ((val & p->val) == p->val)
break;
}
if (p->ctl)
@@ -1233,31 +1232,11 @@ static void sis190_get_drvinfo(struct ne
struct ethtool_drvinfo *info)
{
struct sis190_private *tp = netdev_priv(dev);- unsigned int i;
- u32 *u;
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->bus_info, pci_name(tp->pci_dev));- printk(KERN_INFO "%s: dirty_rx=%ld cur_rx=%ld\n",
- dev->name, tp->dirty_rx, tp->cur_rx);
- u = (void *) tp->RxDescRing;
- printk(KERN_INFO " PSize status addr size PSize status addr size\n");
- for (i = 0; i < (NUM_RX_DESC / 2); i++) {- printk(KERN_INFO "%02d:%08x %08x %08x %08x %08x %08x %08x %08x\n",
- i, u[0], u[1], u[2], u[3], u[4], u[5], u[6], u[7]);
- u += 8;
- }
- printk(KERN_INFO "%s: dirty_tx=%ld cur_tx=%ld\n",
- dev->name, tp->dirty_tx, tp->cur_tx);
- u = (void *) tp->TxDescRing;
- printk(KERN_INFO " PSize status addr size PSize status addr size\n");
- for (i = 0; i < (NUM_TX_DESC / 2); i++) {- printk(KERN_INFO "%02d %08x %08x %08x %08x %08x %08x %08x %08x\n",
- i, u[0], u[1], u[2], u[3], u[4], u[5], u[6], u[7]);
- u += 8;
- }
}
static struct ethtool_ops sis190_ethtool_ops = {
@@ -1311,6 +1290,7 @@ static int __devinit sis190_init_one(str
dev->open = sis190_open;
dev->hard_start_xmit = sis190_start_xmit;
dev->get_stats = sis190_get_stats;
+ SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops);
dev->stop = sis190_close;
dev->tx_timeout = sis190_tx_timeout;
dev->set_multicast_list = sis190_set_rx_mode;Regards
Pascal
Pascal CHAPPERON <[email protected]> :
[...]
Quoted 3 lines
I noticed that you remove
NET_IP_ALIGNinsis190_alloc_rx_skb(), but not insis190_try_rx_copy(); though the driver "worked" like yesterday...
NET_IP_ALIGN should be fine in sis190_alloc_rx_skb() as it only applies to the skb where the driver memcopies (i.e. it is not limited by the alignement requirement of the asic).
[...]
Quoted 9 lines
PSize status addr size PSize status addr size
00:00000000c000000013381010 00000600 00000000c000000013847010 00000600 01:00000000c00000001edcb81000000600 00000000c00000001b69481000000600 02:00000000c00000001b69701000000600 00000000c0000000077c481000000600 03:00000000c000000007e1501000000600 00000000c000000006e3e81000000600 04:00000000c00000001719e81000000600 00000000c00000001b69b81000000600 05:00000000c00000001b69401000000600 00000000c000000007741010 00000600 06:00000000c0000000065d801000000600 00000000c000000007a8401000000600 07:010100a6 76040040 13381810 00000600 00000000c00000001f7c101000000600
^ -> bug
[...]
Quoted 4 lines
So i removed the test "if (
pkt_size<rx_copybreak) {" insis190_try_rx_copy.The driver now works "correctly" (ping, ssh, scp) as long as i want, but probably not in the way you want...
It should be fixed now. Please try the patch of the day:
http://www.fr.zoreil.com/people/francois/misc/20050617-2.6.12-rc-sis190-test.patch
Quoted 2 lines
I don't understand how the Rx packets are managed when
pkt_sizeis greater thanrx_copybreak...
They are directly given to the upper layer. The driver tags a hole in the Rx ring.
[...]
Quoted 8 lines
I also tried to force 10H, 10F, 100H, 100F autoneg off on the other card. All modes were working, but obviously something was wrong :
- 10H 0,4Mo/s both directions- 10F 1,2Mo/s " " - 100H 5Mo/s " "- 100F 1,2Mo/s and 0,3Mo/s
For 100F, sis190 reported "100 Mbps Half Duplex" and the other card 100 Full.
Did the sis190 driver report a link change event ?
--
Ueimor