Skip to contentSkip to conversation

release candidate 19.11-rc4

dpdk-dev Thomas Monjalon 6 participants 6 messages Nov 26, 2019 – Nov 28, 2019

lore
Share & tools
lore
#0 lore raw

A new DPDK release candidate is ready for testing:

	https://git.dpdk.org/dpdk/tag/?id=v19.11-rc4

93 patches were integrated.

The release notes so far:

	http://doc.dpdk.org/guides/rel_notes/release_19_11.html

It should be completed with a list of tested hardware.

This is the last release candidate for DPDK 19.11.
After -rc4 only critical bug fixes and doc updates should be accepted.

The major release should be done in a couple of days (Thanksgiving?). Please share some release validation results
by replying to this message (at [email protected]).

If you are preparing the next release cycle, please send your v1 patches before the 20.02 proposal deadline, which will happen on December 6th. It is also time to build an estimated roadmap for the next cycles.

Thank you everyone

#1 lore raw
Quoted 6 lines · Thomas Monjalon

A new DPDK release candidate is ready for testing:

	https://git.dpdk.org/dpdk/tag/?id=v19.11-rc4

93 patches were integrated.

The release notes so far:

	http://doc.dpdk.org/guides/rel_notes/release_19_11.html
Quoted 8 lines

It should be completed with a list of tested hardware.

This is the last release candidate for DPDK 19.11.
After -rc4 only critical bug fixes and doc updates should be accepted.

The major release should be done in a couple of days (Thanksgiving?). Please share some release validation results
by replying to this message (at [email protected]).

Hi Thomas,

OVS validation completed by Intel on RC4 below.

* vswitch_p2p_tput: vSwitch - configure switch and execute RFC2544 throughput test.
* vswitch_p2p_cont: vSwitch - configure switch and execute RFC2544 continuous stream test.
* vswitch_pvp_tput: vSwitch - configure switch, vnf and execute RFC2544 throughput test.
* vswitch_pvp_cont: vSwitch - configure switch, vnf and execute RFC2544 continuous stream test.
* ovsdpdk_hotplug_attach: Ensure successful port-add after binding a device to igb_uio after ovs-vswitchd is launched.
* ovsdpdk_mq_p2p_rxqs: Setup rxqs on NIC port.
* ovsdpdk_mq_pvp_rxqs: Setup rxqs on vhost user port.
* ovsdpdk_mq_pvp_rxqs_linux_bridge: Confirm traffic received over vhost RXQs with Linux virtio device in guest.
* ovsdpdk_mq_pvp_rxqs_testpmd: Confirm traffic received over vhost RXQs with DPDK device in guest.
* ovsdpdk_vhostuser_client: Test vhost-user client mode.
* ovsdpdk_vhostuser_client_reconnect: Test vhost-user client mode reconnect feature.
* ovsdpdk_vhostuser_server: Test vhost-user server mode.
* ovsdpdk_vhostuser_sock_dir: Verify functionality of vhost-sock-dir flag.
* ovsdpdk_vdev_add_af_packet_pmd: Test addition of port using the af_packet DPDK PMD driver.
* ovsdpdk_vdev_del_af_packet_pmd: Test deletion of port using the af_packet DPDK PMD driver.
* ovsdpdk_numa: Test vhost-user NUMA support. Vhostuser PMD threads should migrate to the same numa slot, where QEMU is executed.
* ovsdpdk_jumbo_p2p: Ensure that jumbo frames are received, processed and forwarded correctly by DPDK physical ports.
* ovsdpdk_jumbo_pvp: Ensure that jumbo frames are received, processed and forwarded correctly by DPDK vhost-user ports.
* ovsdpdk_jumbo_p2p_upper_bound: Ensure that jumbo frames above the configured Rx port's MTU are not accepted.
* ovsdpdk_jumbo_mtu_upper_bound_vport: Verify that the upper bound limit is enforced for OvS DPDK vhost-user ports.
* ovsdpdk_rate_p2p: Ensure when a user creates a rate limiting physical interface that the traffic is limited to the specified policer rate in a p2p setup.
* ovsdpdk_rate_pvp: Ensure when a user creates a rate limiting vHost User interface that the traffic is limited to the specified policer rate in a pvp setup.
* ovsdpdk_qos_p2p: In a p2p setup, ensure when a QoS egress policer is created that the traffic is limited to the specified rate.
* ovsdpdk_qos_pvp: In a pvp setup, ensure when a QoS egress policer is created that the traffic is limited to the specified rate.
* phy2phy_scalability: LTD.Scalability.Flows.RFC2544.0PacketLoss
* phy2phy_scalability_cont: Phy2Phy Scalability Continuous Stream
* pvp_cont: PVP Continuous Stream
* pvvp_cont: PVVP Continuous Stream
* pvpv_cont: Two VMs in parallel with Continuous Stream
* VFIO validation

These were carried out for ixgbe (ixgbe_vf), i40e (i40e_vf) and ice pmds.

Regards
Ian

Quoted 8 lines

If you are preparing the next release cycle, please send your v1 patches before the 20.02 proposal deadline, which will happen on December 6th. It is also time to build an estimated roadmap for the next cycles.

Thank you everyone

#2 lore raw
In reply to Thomas Monjalon

Hi,

Here's the report from the automated Jenkins pipeline at MSFT - QA team will be out for Thanksgiving this week, they can chip in next week for more details, but I do not see any blocking issue being highlighted - just the usual small performance issue that is already being investigated separately.

DPDK v19.11-rc4 was validated on Azure for Canonical UbuntuServer 16.04-LTS latest, Canonical UbuntuServer 18.04-DAILY-LTS latest, RedHat RHEL 7-RAW latest, RedHat RHEL 7.5 latest, Openlogic CentOS 7.5 latest, SUSE SLES 15 latest. Tested with Mellanox and netvsc poll-mode drivers.
The tests were executed using LISAv2 framework ( https://github.com/LIS/LISAv2 ).

Test case description:

* VERIFY-DPDK-COMPLIANCE - verifies kernel is supported and that the build is successful
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST - verifies using testpmd that packets can be sent from a VM to another VM
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK - disables/enables Accelerated Networking for the NICs under test and makes sure DPDK works in both scenarios
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC - disables/enables Accelerated Networking for the NICs while generating traffic using testpmd

* PERF-DPDK-FWD-PPS-DS15 - verifies DPDK forwarding performance using testpmd on 2, 4, 8 cores, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-SINGLE-CORE-PPS-DS4 - verifies DPDK performance using testpmd on 1 core, rx and io mode on size Standard_DS4_v2
* PERF-DPDK-SINGLE-CORE-PPS-DS15 - verifies DPDK performance using testpmd on 1 core, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-MULTICORE-PPS-DS15 - verifies DPDK performance using testpmd on 2, 4, 8 cores, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-MULTICORE-PPS-F32 - verifies DPDK performance using testpmd on 2, 4, 8, 16 cores, rx and io mode on size Standard_F32s_v2

* DPDK-RING-LATENCY - verifies DPDK CPU latency using https://github.com/shemminger/dpdk-ring-ping

* VERIFY-DPDK-PRIMARY-SECONDARY-PROCESSES - verifies primary / secondary processes support for DPDK. Runs only on RHEL and Ubuntu distros with Linux kernel >= 4.20

* VERIFY-DPDK-OVS - builds OVS with DPDK support and tests if the OVS DPDK ports can be created. Runs only on Ubuntu distro.
* VERIFY-DPDK-VPP - builds VPP with DPDK support and tests if the VPP ports are present. Runs only on RHEL and Ubuntu distros.
* VERIFY-DPDK-NFF-GO - builds NFF-GO with DPDK support and runs the functional tests from the NFF-GO repository. Runs only on Ubuntu distro.

DPDK job exited with status: UNSTABLE.

Test results for DPDK 'v19.11-rc4' and Azure image: 'Canonical UbuntuServer 16.04-LTS latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: FAILED
* VERIFY-DPDK-OVS: PASSED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'Canonical UbuntuServer 18.04-DAILY-LTS latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: PASSED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'RedHat RHEL 7-RAW latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'RedHat RHEL 7.5 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'Openlogic CentOS 7.5 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'SUSE SLES 15 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: FAILED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Quoted 32 lines · Thomas Monjalon

A new DPDK release candidate is ready for testing:

https://git.dpdk.org/dpdk/tag/?id=v19.11-rc4

93 patches were integrated.

The release notes so far:

http://doc.dpdk.org/guides/rel_notes/release_19_11.html

It should be completed with a list of tested hardware.

This is the last release candidate for DPDK 19.11. After -rc4 only critical bug fixes and doc updates should be accepted.

The major release should be done in a couple of days (Thanksgiving?). Please share some release validation results
by replying to this message (at
[email protected]
).

If you are preparing the next release cycle, please send your v1 patches
before the 20.02 proposal deadline, which will happen on December 6th.
It is also time to build an estimated roadmap for the next cycles.

Thank you everyone

Signature · 2 lines
Kind regards,
Luca Boccassi
#3 lore raw

Hi,

We are fine with test report on release candidate 19.11-rc4.

Following Test Cases have been validated successfully on NXP platforms:
dpdk_l2fwd_function
dpdk_l3fwd_function
dpdk_l2fwd-crypto_caam_function
dpdk_ovs-host_function
dpdk_multiprocess_symmetric_mp
dpdk_multiprocess_simple_mp dpdk_multiprocess_symmetric_mp_qdma dpdk_multiprocess_l2fwd-crypto
dpdk_testpmd_fwd_jumbo
dpdk_timer_function
dpdk_ip_fragmentation
dpdk_l3fwd_acl
dpdk_l2fwd_keepalive
dpdk_test_function
dpdk_test_crypto_perf
dpdk_skelton_function
dpdk_cmdline_function
dpdk_rxtx_callback_function
dpdk_ethtool_function
dpdk_ipv4_multicast

regards,
Sachin Saxena

Quoted 182 lines

-----Original Message-----
From: dev <[email protected]> On Behalf Of Luca Boccassi
Sent: Thursday, November 28, 2019 3:21 PM
To: [email protected]
Cc: [email protected]; Ju-Hyoung Lee <[email protected]>; Abhishek Marathe <[email protected]>
Subject: Re: [dpdk-dev] [dpdk-announce] release candidate 19.11-rc4

Hi,

Here's the report from the automated Jenkins pipeline at MSFT - QA team will be out for Thanksgiving this week, they can chip in next week for more details, but I do not see any blocking issue being highlighted - just the usual small performance issue that is already being investigated separately.

DPDK v19.11-rc4 was validated on Azure for Canonical UbuntuServer 16.04- LTS latest, Canonical UbuntuServer 18.04-DAILY-LTS latest, RedHat RHEL 7- RAW latest, RedHat RHEL 7.5 latest, Openlogic CentOS 7.5 latest, SUSE SLES 15 latest.
Tested with Mellanox and netvsc poll-mode drivers.
The tests were executed using LISAv2 framework (
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithu
b.com%2FLIS%2FLISAv2&amp;data=02%7C01%7Csachin.saxena%40nxp.com %7C64f8b403f28b4cab85c108d773e8834d%7C686ea1d3bc2b4c6fa92cd99c 5c301635%7C0%7C0%7C637105314779183163&amp;sdata=Z7XQKAnhtgW wqASYhMtwMFRfuDPZL8fdJSGUfqfZqgM%3D&amp;reserved=0 ).

Test case description:

* VERIFY-DPDK-COMPLIANCE - verifies kernel is supported and that the build is successful
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST - verifies using testpmd that packets can be sent from a VM to another VM
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK - disables/enables Accelerated Networking for the NICs under test and makes sure DPDK works in both scenarios
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC - disables/enables Accelerated Networking for the NICs while generating traffic using testpmd

* PERF-DPDK-FWD-PPS-DS15 - verifies DPDK forwarding performance using testpmd on 2, 4, 8 cores, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-SINGLE-CORE-PPS-DS4 - verifies DPDK performance using testpmd on 1 core, rx and io mode on size Standard_DS4_v2
* PERF-DPDK-SINGLE-CORE-PPS-DS15 - verifies DPDK performance using testpmd on 1 core, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-MULTICORE-PPS-DS15 - verifies DPDK performance using testpmd on 2, 4, 8 cores, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-MULTICORE-PPS-F32 - verifies DPDK performance using testpmd on 2, 4, 8, 16 cores, rx and io mode on size Standard_F32s_v2

* DPDK-RING-LATENCY - verifies DPDK CPU latency using
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithu
b.com%2Fshemminger%2Fdpdk-ring- ping&amp;data=02%7C01%7Csachin.saxena%40nxp.com%7C64f8b403f28b4 cab85c108d773e8834d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C 0%7C637105314779183163&amp;sdata=u6QPFQ%2Bygf9M%2BL7i39LSIpc 8T37j8jQRywobmWuQhkc%3D&amp;reserved=0

* VERIFY-DPDK-PRIMARY-SECONDARY-PROCESSES - verifies primary / secondary processes support for DPDK. Runs only on RHEL and Ubuntu distros with Linux kernel >= 4.20

* VERIFY-DPDK-OVS - builds OVS with DPDK support and tests if the OVS DPDK ports can be created. Runs only on Ubuntu distro.
* VERIFY-DPDK-VPP - builds VPP with DPDK support and tests if the VPP ports are present. Runs only on RHEL and Ubuntu distros.
* VERIFY-DPDK-NFF-GO - builds NFF-GO with DPDK support and runs the functional tests from the NFF-GO repository. Runs only on Ubuntu distro.

DPDK job exited with status: UNSTABLE.

Test results for DPDK 'v19.11-rc4' and Azure image: 'Canonical UbuntuServer 16.04-LTS latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: FAILED
* VERIFY-DPDK-OVS: PASSED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'Canonical UbuntuServer 18.04-DAILY-LTS latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: PASSED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'RedHat RHEL 7-RAW latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'RedHat RHEL 7.5 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'Openlogic CentOS 7.5 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'SUSE SLES 15 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: FAILED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Quoted 4 lines · Thomas Monjalon

A new DPDK release candidate is ready for testing:

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit.
dpdk.org%2Fdpdk%2Ftag%2F%3Fid%3Dv19.11-

rc4&amp;data=02%7C01%7Csachin.s

Quoted 1 line

axena%40nxp.com%7C64f8b403f28b4cab85c108d773e8834d%7C686ea1d3 bc2b4c6fa

Quoted 1 line

92cd99c5c301635%7C0%7C0%7C637105314779193156&amp;sdata=9Ohpf XEmVuNtXej

Quoted 7 lines

7xJRW2J7e98hNw5JFe6yurKSUExQ%3D&amp;reserved=0

93 patches were integrated.

The release notes so far:

https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdoc.d

Quoted 1 line

pdk.org%2Fguides%2Frel_notes%2Frelease_19_11.html&amp;data=02%7C0 1%7Cs

Quoted 1 line

achin.saxena%40nxp.com%7C64f8b403f28b4cab85c108d773e8834d%7C686 ea1d3bc

Quoted 1 line

2b4c6fa92cd99c5c301635%7C0%7C0%7C637105314779193156&amp;sdat a=yTs7hRHL

Quoted 11 lines

raBaWIMP%2B3lEzAcofiNVWY4N2l7PhEPEvFs%3D&amp;reserved=0

It should be completed with a list of tested hardware.

This is the last release candidate for DPDK 19.11.
After -rc4 only critical bug fixes and doc updates should be accepted.

The major release should be done in a couple of days (Thanksgiving?). Please share some release validation results by replying to this message (at [email protected] ).

Quoted 9 lines

If you are preparing the next release cycle, please send your v1 patches before the 20.02 proposal deadline, which will happen on December 6th.
It is also time to build an estimated roadmap for the next cycles.

Thank you everyone

--
Kind regards,
Luca Boccassi

#5 lore raw
In reply to Thomas Monjalon

Hi,

Quoted 8 lines

-----Original Message-----
From: announce <[email protected]> On Behalf Of Thomas Monjalon
Sent: Wednesday, November 27, 2019 1:56 AM
To: [email protected]
Subject: [dpdk-announce] release candidate 19.11-rc4

A new DPDK release candidate is ready for testing:

The following covers the tests that we ran on Mellanox hardware for this version:

- Basic functionality:
- Send and receive multiple types of traffic.
- testpmd xstats counter test.
- testpmd timestamp test.
- Changing/checking link status through testpmd.
- RTE flow and flow_director tests.
Items: eth / vlan / ipv4 / ipv6 / tcp / udp / icmp / gre / nvgre / vxlan / geneve / ip in ip / mplsoudp / mplsogre
Actions: drop / queue / rss / mark / flag / jump / count / port_id / raw_encap / raw_decap / vxlan_encap / vxlan_decap / NAT
- Some RSS tests.
- VLAN stripping and insertion tests.
- Checksum and TSO tests.
- ptype tests.
- Port interrupt testing.
- Multi-process testing.

Regards,
Ali

#4 lore raw
In reply to Luca Boccassi

Hi, all
Below is the report from Intel validation team.
Summary:
1. Totally 9852 test cases for 19.11 RC4, 9852 cases are executed, 9819 test cases passed, 33 test cases failed. Execution rate is 100%, pass rate is 99.67%.
2. All Intel build tests(30 different configurations) passed. No critical/high issues for RC4.
3. Totally 405 new tests are added for the 19.11 new features.

Coverage for the different OS/NIC/configurations.
Please check the full test plan at http://doc.dpdk.org/dts/test_plans/ and automation test suites at https://git.dpdk.org/tools/dts/tree/tests

NIC PMD: Covered Intel NICs. Below are some test list for reference. All test TestSuite_blacklist.py
TestSuite_checksum_offload.py
TestSuite_cmdline.py
TestSuite_ddp_gtp.py
TestSuite_ddp_gtp_qregion.py
TestSuite_ddp_mpls.py
TestSuite_ddp_ppp_l2tp.py
TestSuite_dual_vlan.py
TestSuite_dynamic_config.py
TestSuite_dynamic_flowtype.py
TestSuite_dynamic_queue.py
TestSuite_flow_classify.py
TestSuite_flow_filtering.py TestSuite_fortville_rss_granularity_config.py TestSuite_generic_filter.py
TestSuite_generic_flow_api.py
TestSuite_hotplug.py
TestSuite_iavf.py
TestSuite_jumboframes.py
TestSuite_link_flowctrl.py
TestSuite_link_status_interrupt.py
TestSuite_mac_filter.py
TestSuite_mdd.py
TestSuite_multicast.py
TestSuite_veb_switch.py
TestSuite_vf_interrupt_pmd.py
TestSuite_vf_jumboframe.py
TestSuite_vf_kernel.py
TestSuite_vf_l3fwd.py
TestSuite_vf_macfilter.py
TestSuite_vf_offload.py
TestSuite_vf_packet_rxtx.py
TestSuite_vf_port_start_stop.py
TestSuite_vf_rss.py
TestSuite_vf_vlan.py

Vhost/Virtio regression test is passed, below is the major test list. pvp_multi_paths_vhost_single_core_performance pvp_multi_paths_virtio_single_core_performance pvp_multi_paths_performance pvp_qemu_multi_paths_port_restart
pvp_diff_qemu_version
vhost_multi_queue_qemu
vhost_virtio_pmd_interrupt
virtio_event_idx_interrupt
vhost_dequeue_zero_copy
pvp_virtio_user_multi_queues

Cryptodev/Compression regression test is passed, below is the major test list. unit_tests_cryptodev_func
ipsec_gw_cryptodev_func
fips_cryptodev
l2fwd-crypto_cryptodev_func
crypto-perf_cryptodev_perf
virtio_ipsec_cryptodev_func
virtio_unit_cryptodev_func
virtio_perf_cryptodev_func
QAT compression PMD
ISA_L Compression PMD
Zlib Compression PMD
Compressdev QAT

Other Packet processing libraries test such as Power, Metrics, HQoS, are also tested. DPDK PMD for AF_XDP_test
ntb_test_plan
cbdma_test_plan
rte_security AESNI
rte_security AESNI
IPsec: Security Association Database (SAD)
IPsec: Support multiple crypto processing modes for the same SA Qos_sched
Ip_pipeline
softnic

Quoted 150 lines

-----Original Message-----
From: dev <[email protected]> On Behalf Of Luca Boccassi
Sent: Thursday, November 28, 2019 5:51 PM
To: [email protected]
Cc: [email protected]; Ju-Hyoung Lee <[email protected]>; Abhishek Marathe <[email protected]>
Subject: Re: [dpdk-dev] [dpdk-announce] release candidate 19.11-rc4

Hi,

Here's the report from the automated Jenkins pipeline at MSFT - QA team will be out for Thanksgiving this week, they can chip in next week for more details, but I do not see any blocking issue being highlighted - just the usual small performance issue that is already being investigated separately.

DPDK v19.11-rc4 was validated on Azure for Canonical UbuntuServer 16.04-LTS latest, Canonical UbuntuServer 18.04-DAILY-LTS latest, RedHat RHEL 7-RAW latest, RedHat RHEL 7.5 latest, Openlogic CentOS 7.5 latest, SUSE SLES 15 latest. Tested with Mellanox and netvsc poll-mode drivers.
The tests were executed using LISAv2 framework
( https://github.com/LIS/LISAv2 ).

Test case description:

* VERIFY-DPDK-COMPLIANCE - verifies kernel is supported and that the build is successful
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST - verifies using testpmd that packets can be sent from a VM to another VM
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK - disables/enables Accelerated Networking for the NICs under test and makes sure DPDK works in both scenarios
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC - disables/enables Accelerated Networking for the NICs while generating traffic using testpmd

* PERF-DPDK-FWD-PPS-DS15 - verifies DPDK forwarding performance using testpmd on 2, 4, 8 cores, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-SINGLE-CORE-PPS-DS4 - verifies DPDK performance using testpmd on 1 core, rx and io mode on size Standard_DS4_v2
* PERF-DPDK-SINGLE-CORE-PPS-DS15 - verifies DPDK performance using testpmd on 1 core, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-MULTICORE-PPS-DS15 - verifies DPDK performance using testpmd on 2, 4, 8 cores, rx and io mode on size Standard_DS15_v2
* PERF-DPDK-MULTICORE-PPS-F32 - verifies DPDK performance using testpmd on 2, 4, 8, 16 cores, rx and io mode on size Standard_F32s_v2

* DPDK-RING-LATENCY - verifies DPDK CPU latency using
https://github.com/shemminger/dpdk-ring-ping

* VERIFY-DPDK-PRIMARY-SECONDARY-PROCESSES - verifies primary / secondary processes support for DPDK. Runs only on RHEL and Ubuntu distros with Linux kernel >= 4.20

* VERIFY-DPDK-OVS - builds OVS with DPDK support and tests if the OVS DPDK ports can be created. Runs only on Ubuntu distro.
* VERIFY-DPDK-VPP - builds VPP with DPDK support and tests if the VPP ports are present. Runs only on RHEL and Ubuntu distros.
* VERIFY-DPDK-NFF-GO - builds NFF-GO with DPDK support and runs the functional tests from the NFF-GO repository. Runs only on Ubuntu distro.

DPDK job exited with status: UNSTABLE.

Test results for DPDK 'v19.11-rc4' and Azure image: 'Canonical UbuntuServer 16.04-LTS latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: FAILED
* VERIFY-DPDK-OVS: PASSED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'Canonical UbuntuServer 18.04-DAILY-LTS latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: PASSED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'RedHat RHEL 7-RAW latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'RedHat RHEL 7.5 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'Openlogic CentOS 7.5 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: PASSED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: FAILED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Test results for DPDK 'v19.11-rc4' and Azure image: 'SUSE SLES 15 latest':

* PERF-DPDK-SINGLE-CORE-PPS-DS4: FAILED
* VERIFY-DPDK-OVS: SKIPPED
* VERIFY-DPDK-BUILD-AND-TESTPMD-TEST: PASSED
* VERIFY-SRIOV-FAILSAFE-FOR-DPDK: PASSED
* PERF-DPDK-MULTICORE-PPS-F32: PASSED
* VERIFY-DPDK-FAILSAFE-DURING-TRAFFIC: PASSED

Quoted 19 lines · Thomas Monjalon

A new DPDK release candidate is ready for testing:

https://git.dpdk.org/dpdk/tag/?id=v19.11-rc4

93 patches were integrated.

The release notes so far:

http://doc.dpdk.org/guides/rel_notes/release_19_11.html

It should be completed with a list of tested hardware.

This is the last release candidate for DPDK 19.11.
After -rc4 only critical bug fixes and doc updates should be accepted.

The major release should be done in a couple of days (Thanksgiving?). Please share some release validation results by replying to this message (at [email protected] ).

Quoted 9 lines

If you are preparing the next release cycle, please send your v1 patches before the 20.02 proposal deadline, which will happen on December 6th.
It is also time to build an estimated roadmap for the next cycles.

Thank you everyone

--
Kind regards,
Luca Boccassi