FrameBuffer Problem With 2.6.0
Quoted 4 lines · Armin
Quoted 1 line · Andreas Unterkircher
I had similar the same Problem... i fixed it when i also put the
i have compile kernel with vga fonts , Still are not working ...
And did you enable framebuffer console support in Device Drivers -> Graphics Support -> Console display driver support -> Framebuffer Console Support ? It looks to me like that you did not enabled this, and so you get hardware in graphics mode (when fbdev loads), but no text there (as there is no fbcon in your kernel). 2.6.x kernel has strange idea that non-embedded users need fbdev without fbcon by default...
I'm not aware about any problems with matroxfb driver in Linus kernel except that you should use 'video=matroxfb:nopan' to avoid problems with default resolution XXXx65536 (or clip vyres yourself to reasonable value). Of course all 2.6.x fbdev limits apply also to matroxfb driver. If you want interface compatible with 2.4.x, you'll have to get patch from ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.6.0.gz (only vgacon, matroxfb and vesafb are tested).
Best regards,
Petr Vandrovec [email protected]
Quoted 8 lines · Petr Vandrovec
I'm not aware about any problems with matroxfb driver in Linus kernel except that you should use 'video=matroxfb:nopan' to avoid problems with default resolution XXXx65536 (or clip vyres yourself to reasonable value). Of course all 2.6.x fbdev limits apply also to matroxfb driver. If you want interface compatible with 2.4.x, you'll have to get patch from ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.6.0.gz (only vgacon, matroxfb and vesafb are tested).
Just enable VesaFB and set vga to 791 , without compiling anything else , now frame buffer are working perfectly :)
thanks everyone who helped ;)
Signature · 1 line
Kissing a fish is like smoking a bicycle.
Quoted 13 lines · Petr Vandrovec
Quoted 4 lines · Armin
Quoted 1 line · Andreas Unterkircher
I had similar the same Problem... i fixed it when i also put the
i have compile kernel with vga fonts , Still are not working ...
And did you enable framebuffer console support in Device Drivers -> Graphics Support -> Console display driver support -> Framebuffer Console Support ? It looks to me like that you did not enabled this, and so you get hardware in graphics mode (when fbdev loads), but no text there (as there is no fbcon in your kernel). 2.6.x kernel has strange idea that non-embedded users need fbdev without fbcon by default...
Quoted 7 lines
I'm not aware about any problems with matroxfb driver in Linus kernel except that you should use 'video=matroxfb:nopan' to avoid problems with default resolution XXXx65536 (or clip vyres yourself to reasonable value). Of course all 2.6.x fbdev limits apply also to matroxfb driver. If you want interface compatible with 2.4.x, you'll have to get patch from ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/matroxfb-2.6.0.gz (only vgacon, matroxfb and vesafb are tested).
I'm fielding a bug report from someone which is related to the EDID changes here;
http://bugzilla.kernel.org/show_bug.cgi?id=1458
Do you think they may be related?