Skip to contentSkip to conversation

2.6-test11 framebuffer Matrox

DISCUSSION Petr Vandrovec 1 participant 1 message Dec 19, 2003

lore
Share & tools
lore
#0 lore raw
Quoted 8 lines · nick black
Quoted 2 lines · Michael Hunold

Hmm, I just tested with the 2.6.0 release and my both cards are working properly now. The only thing is a huge white box around the penguin logo.

As I said, this happens to me without Petr's patch, and goes away with it. Can you check out my earlier post in this thread, and analyze your X+fbcon interaction with reagrds to fbdev vs. mga driver, and Petr's patch?

I think that it works due to pure luck. XFree's mga driver reprograms some accelerator registers (namely color depth and horizontal line length) under some circumstances (like when gnome's clock applet in right upper corner changes value - i.e. every second or every minute depending on setting when DRI is enabled) even if XFree are not on foreground. This causes serious problems, as then you are running console at (say) 640x480/8bpp, but accelerator gets set to 1280x1024/32bpp, painting 16x larger characters to screen :-(

I know only three workarounds: either do not use DRI, or disable use of accelerator on console (fbset -accel false), or use same vxres and depth on console and in X (or fourth: fix XFree driver to not touch hardware when they are not on foreground...).
Petr Vandrovec [email protected]