Hello,
In our setup, we created a dedicated real-time section on top of RAID0 (backed by multiple SSDs). The rest of the filesystem resides on another device.
When we ran the "fstrim" command on the mountpoint (mounted with -o rtdev=/dev/md/raid), the discard does not propogate to the real-time partition, and only the partition with metadata gets trimmed.
Is there a solution to this?
Best regards,
Konst
TRIM does not propagate real-time sections
We are using Linux 5.15, by the way.
Quoted 14 lines · Konst Mayer
Hello,
In our setup, we created a dedicated real-time section on top of RAID0 (backed by multiple SSDs). The rest of the filesystem resides on another device.
When we ran the "fstrim" command on the mountpoint (mounted with -o rtdev=/dev/md/raid), the discard does not propogate to the real-time partition, and only the partition with metadata gets trimmed.
Is there a solution to this?
Best regards,
Konst
Re: TRIM does not propagate real-time sections
Quoted 14 lines · Konst Mayer
We are using Linux 5.15, by the way.
Quoted 11 lines · Konst Mayer
Hello,
In our setup, we created a dedicated real-time section on top of RAID0 (backed by multiple SSDs). The rest of the filesystem resides on another device.
When we ran the "fstrim" command on the mountpoint (mounted with -o rtdev=/dev/md/raid), the discard does not propogate to the real-time partition, and only the partition with metadata gets trimmed.
Is there a solution to this?
https://lore.kernel.org/linux-xfs/167243867907.713699.3220336734546600556.stgit@magnolia/
https://lore.kernel.org/linux-xfs/170404846975.1763756.7829043057977943548.stgit@frogsfrogsfrogs/
--D
Quoted 3 lines
Quoted 2 lines
Best regards,
Konst