Skip to contentSkip to conversation

video: fbdev: intelfb: Use aperture size from pci_resource_len

PATCH Applied Petr Cvek 2 participants 2 messages Jun 17, 2022 – Jun 20, 2022 Framebuffer layer

lore
Share & tools
lore

Petr Cvek

author
#0 lore raw

PATCH 1/2 video: fbdev: intelfb: Use aperture size from pci_resource_len

Aperture size for i9x5 variants is determined from PCI base address.

	if (pci_resource_start(pdev, 2) & 0x08000000)
		*aperture_size = MB(128);
	...

This condition is incorrect as 128 MiB address can have the address set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just use pci_resource_len().

The true settings of the aperture size is in the MSAC register, which could be used instead. However the value is used only as an info message, so it doesn't matter.

---
 drivers/video/fbdev/intelfb/intelfbhw.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/video/fbdev/intelfb/intelfbhw.c +5 -7
index 57aff7450bce..2086e06532ee 100644
@@ -201,13 +201,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 	case PCI_DEVICE_ID_INTEL_945GME:
 	case PCI_DEVICE_ID_INTEL_965G:
 	case PCI_DEVICE_ID_INTEL_965GM:
-		/* 915, 945 and 965 chipsets support a 256MB aperture.
-		   Aperture size is determined by inspected the
-		   base address of the aperture. */
-		if (pci_resource_start(pdev, 2) & 0x08000000)
-			*aperture_size = MB(128);
-		else
-			*aperture_size = MB(256);
+		/*
+		 * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
+		 * aperture. Determine size from PCI resource length.
+		 */
+		*aperture_size = pci_resource_len(pdev, 2);
 		break;
 	default:
 		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
Signature · 1 line
2.36.1
maintainer Applied
#1 lore raw
Quoted 10 lines · Petr Cvek

Aperture size for i9x5 variants is determined from PCI base address.

	if (pci_resource_start(pdev, 2) & 0x08000000)
		*aperture_size = MB(128);
	...

This condition is incorrect as 128 MiB address can have the address set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just use pci_resource_len().

Quoted 5 lines

The true settings of the aperture size is in the MSAC register, which could be used instead. However the value is used only as an info message, so it doesn't matter.

applied both patches to the fbdev tree.

Thanks!
Helge

Quoted 27 lines
---
 drivers/video/fbdev/intelfb/intelfbhw.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/video/fbdev/intelfb/intelfbhw.c +5 -7
index 57aff7450bce..2086e06532ee 100644
@@ -201,13 +201,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 	case PCI_DEVICE_ID_INTEL_945GME:
 	case PCI_DEVICE_ID_INTEL_965G:
 	case PCI_DEVICE_ID_INTEL_965GM:
-		/* 915, 945 and 965 chipsets support a 256MB aperture.
-		   Aperture size is determined by inspected the
-		   base address of the aperture. */
-		if (pci_resource_start(pdev, 2) & 0x08000000)
-			*aperture_size = MB(128);
-		else
-			*aperture_size = MB(256);
+		/*
+		 * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
+		 * aperture. Determine size from PCI resource length.
+		 */
+		*aperture_size = pci_resource_len(pdev, 2);
 		break;
 	default:
 		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)