Routing for multiple uplinks and SNAT to 2 source IPs
Hi,
I configured a router box to use 2 providers, as described in the HOWTO. (Apendix 1)
I want to use both links to reach a single smtp server. As I read in the kptd and in some old messages of this list, doing a SNAT in the postrouting chain comes _after_ the routing desision. So I guess the following lines I'm trying to use are wrong. (See Apendix 1)
What can I do to have multiple connection to the same IP to use both links?
Do the following lines have some effect after I do SNAT in the mangle table of the POSTROUTING chain?
# use the right route if the source address is already set ip rule add from $IP1 table T1 ip rule add from $IP2 table T2
Thanks a lot!
Nelson.-
Apendix 1:
# SNAT the internal networks using round robin. I think this wont work. iptables -t nat -A POSTROUTING -o $IF1 -s 192.168.0.0/255.255.255.0 -j SNAT --to-source $IP1 --to-source $IP2
iptables -t nat -A POSTROUTING -o $IF1 -s 192.168.10.0/255.255.255.0 -j SNAT --to-source $IP1 --to-source $IP2
iptables -t nat -A POSTROUTING -o $IF2 -s 192.168.0.0/255.255.255.0 -j SNAT --to-source $IP1 --to-source $IP2
iptables -t nat -A POSTROUTING -o $IF2 -s 192.168.10.0/255.255.255.0 -j SNAT --to-source $IP1 --to-source $IP2
[1] http://lartc.org/howto/lartc.rpdb.multiple-links.html
[2] http://www.docum.org/docum.org/kptd/
Signature · 9 lines
Homepage : http://geocities.com/arhuaco
The first principle is that you must not fool yourself
and you are the easiest person to fool.
-- Richard Feynman.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartcQuoted 6 lines · Nelson Castillo
Hi,
I configured a router box to use 2 providers, as described in the HOWTO. (Apendix 1)
Quoted 8 lines
I want to use both links to reach a single smtp server. As I read in the kptd and in some old messages of this list, doing a SNAT in the postrouting chain comes _after_ the routing desision. So I guess the following lines I'm trying to use are wrong. (See Apendix 1)
What can I do to have multiple connection to the same IP to use both links?
You should google "policy based routing Linux" and "port based routing Linux"
http://linux-ip.net/html/ch-routing.html
http://snafu.freedom.org/linux2.2/docs/advanced-routing/
I know nothing of squid, but previous posts here indicate that it may be useful to you.
--
Gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc