routing for multiple uplinks + DNAT (LVS in my case)
Hi.
Contents:
1) Introduction
2) 2 Questions
* Introduction:
I used this HOWTO to use multiple providers.
http://lartc.org/howto/lartc.rpdb.multiple-links.html
The box is a load balancer, using the Linux Virtual Server.
We have a problem with lost connections, and it seems you get issues when you combine this setup with DNAT [1].
The proposed solution [1] is to use these rules to mark packages with the conntrack module ... so I guess you mark all the packages that belong to the connection when it's established (and every package before they get DNATted).
# iptables -t mangle -A PREROUTING -m conntrack --ctorigdst $IP1 -j MARK --set-mark=1 # iptables -t mangle -A PREROUTING -m conntrack --ctorigdst $IP2 -j MARK --set-mark=2
And then use the mark to route the outgoing packages correctly.
# ip rule add fwmark 1 table T1 # ip rule add fwmark 2 table T2
[1] (Spanish) http://bulma.net/body.phtml?nIdNoticia!45&nIdPage=last
* Questions
- Has anybody in this list experienced similar problems?
- I haven't tried this solution but I will today. I'd like to know if there's a way to
solve this problem without using fwmark.
I'm using fwmarks already to ease the configuration of keepalived
and I'll need
to find a workaround to another problem if I have to use fwmarks. It
is: I have 2
redundant routers and I use heartbeat to set up the real (internet) IPs.
http://cgi.afc.no-ip.info/svnwiki.cgi/default/Keepalived%20with%20fwmark%20and%20no%20VIP
Regards,
Nelson.-
BTW: There should be a warning in the HOWTO for this DNAT issue, since this
setup if fair common (I guess).
Signature · 9 lines
Homepage : http://geocities.com/arhuaco
The first principle is that you must not fool yourself
and you are the easiest person to fool.
-- Richard Feynman.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc