: alsa 1.0.9rc4 + intel 82801FB/.../ = No sound (Benq 52-101)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1134>
======================================================================
Reported By: liangalei Assigned To: perex ====================================================================== Project: ALSA - driver Issue ID: 1134 Category: 0_compilation problem_!!! Reproducibility: always Severity: minor Priority: normal Status: assigned Distribution: Fedora Core 3 Kernel Version: 2.6.11-1.14 ====================================================================== Date Submitted: 05-28-2005 08:49 CEST Last Modified: 06-01-2005 16:58 CEST
======================================================================
Summary: alsa 1.0.9rc4 + intel 82801FB/.../ = No sound (Benq
52-101)
Description:
My notebook is Benq 52-101, update FC3 to kernel 2.6.11-1.14_FC3
alsamixer report: Card=intel ICH6, chip=Conexant id 3 (Question, Conexant just support modem's AC-97 or else provide whole sound ? )
alsaconf: can find "Intel Corp 82801FB/.../ ICH6 family AC'97 Audio", and will contine to "Have a lot fun".
I have ever, update linux kernel from 2.6.9 to 2.6.11(yum update, no recompiling), and alsa driver from 0.9.0/1.0.8/1.0.9rc3/4.
Recomipling ALsa driver/lib/oss/tools/util.., with drive, ever try ----- ./configure --with-cards=azx (error: no this card) ----- ./configure ; make; make install (no error report), not run ./snddevices
No sound ! So much days, so much test..... (if i915GM chipset + Conexant chip...(see below lspci), will be powered by alsa-1.0.9rc4 ? --- if still not, I will just wait for new alsa-driver.)
thanks
======================================================================
----------------------------------------------------------------------
liangalei - 05-30-05 03:29
----------------------------------------------------------------------
hinted by https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1078
I have a look at my /proc/asound, it looks like following, ----- Is it strange? I see many "off" ---- but I cannot turn-ONs them, by either alsamixer or aumix, because in alsamixer jack-bars, them can not be seen !
[lal@lal ~]$ cat /proc/asound/card0/codec97#0/ac97#0-0 0-0/0: Conexant id 31
Revision : 0x00
Compat. Class : 0x00
Subsys. Vendor ID: 0x0000
Subsys. ID : 0x0000
Capabilities : DAC resolution : 18-bit ADC resolution : 18-bit 3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=2 AMAP LDAC SDAC CDAC DSA=0 SPDIF
Extended status : PRL SPCV LDAC SDAC CDAC SPDIF=10/11
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
Extended modem ID: codec=0 LIN1
Modem status : PRA(GPIO) PRB(res) PRC(ADC1) PRD(DAC1) PRE(ADC2)
PRF(DAC2) PRG(HADC) PRH(HDAC)
Line1 rate : 48000Hz
[lal@lal ~]$
----------------------------------------------------------------------
tiwai - 06-01-05 16:58
----------------------------------------------------------------------
I suspect it's not a Conexant codec. The driver seems to fail detection of the codec.
This kind of problems is often related with ACPI. Try to tune the ACPI boot setting.
Issue History
Date Modified Username Field Change
======================================================================
05-28-05 08:49 liangalei New Issue 05-28-05 08:49 liangalei Distribution => Fedora Core 3 05-28-05 08:49 liangalei Kernel Version => 2.6.11-1.14 05-28-05 09:17 liangalei Note Added: 0004759 05-28-05 09:18 liangalei Issue Monitored: liangalei 05-30-05 03:29 liangalei Note Added: 0004795 06-01-05 16:58 tiwai Note Added: 0004863
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005