Prevent dropping into a shell triggered by serial port
Hi
I have connected my mini2440 to a Com device using serial port.
when I try to boot, uboot always drops into the shell. If I remove the serial port connector, it boots happily.
Looks like the Com device is responding to the boot messages from uboot and uboot is dropping into the shell.
1) Can I prevent messages from uboot into serial port
2) Can I continue to boot even if I drop into a shell (like automatically typing "boot" in the shell) with a script like .bashrc equivalent
3) can I totally shutoff the serial port for uboot only
Thanks
Sunitha
Signature · 2 lines
View this message in context: http://old.nabble.com/Prevent-dropping-into-a-shell-triggered-by-serial-port-tp30015548p30015548.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 11 lines · sunimohan
Hi
?I have connected my mini2440 to a Com device using serial port.
when I try to boot, uboot always drops into the shell. If I remove the serial port connector, it boots happily.
Looks like the Com device is responding to the boot messages from uboot and uboot is dropping into the shell.
Quoted 7 lines
1) Can I prevent messages from uboot ?into serial port
2) Can I continue to boot even if I drop into a shell (like automatically typing "boot" in the shell) with a script like .bashrc equivalent
3) can I totally shutoff the serial port for uboot only
RTFM
see the main README, doc/README.silent, doc/README.modem, doc/README.autoboot in u-boot. There are lots of ways to handle this.
Dear sunimohan,
Quoted 3 lines · In message <[email protected]> you wrote:
when I try to boot, uboot always drops into the shell. If I remove the serial port connector, it boots happily.
If this happens even if you don't transmit data over the serial line tht you should fix your hardware. Seems you have floating signals, so add appropriate pull-up or pull-down resistors.
Quoted 2 lines
Looks like the Com device is responding to the boot messages from uboot and uboot is dropping into the shell.
Sounds like a hardware-related issue to me.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "We learn from history that we learn nothing from history." - George Bernard Shaw