How to use eSPI between Host and slave BMC in openbmc project
Hi Felix,
Both KCS and eSPI driver are ready x86 platforms.
Please refer https://github.com/Intel-BMC/
Example:
https://github.com/Intel-BMC/openbmc/blob/intel/meta-openbmc-mods/meta-ast2500/recipes-bsp/u-boot/files/0022-KCS-driver-support-in-uBoot.patch
https://github.com/Intel-BMC/openbmc/blob/intel/meta-openbmc-mods/meta-ast2600/recipes-bsp/u-boot/files/0005-Ast2600-Enable-interrupt-in-u-boot.patch
https://github.com/Intel-BMC/openbmc/blob/intel/meta-openbmc-mods/meta-common/recipes-kernel/linux/linux-aspeed/0022-Add-AST2500-eSPI-driver.patch
BTW: you could set Acute travel logic to analyze eSPI bus. There is eSPI connector on Intel CRB platform.
Thanks,
Kwin.
Dear James/andrew/Oskar
Thanks a lot.
I am studying eSPI spec. But it's hard to find any products with eSPI.
Your reply gives more understanding about eSPI.
Looking forward to more applications with eSPI in openbmc project.
Thanks again.
BR
Felix
| |
zhang_cy1989
|
|
zhang_cy1989 at 163.com<https://lists.ozlabs.org/listinfo/openbmc>
Dear Kwin
I'm very sorry for the late reply.
I'll try it later. Maybe delayed some days for other things. Anyway, the result and any problem will be show here after my experiment. Looking forward to more communication with you
Thanks
BR
Felix
| |zhang_cy1989
|
|
[email protected]
|
签名由网易邮箱大师定制
On 5/27/2020 15:03,Wang, Kuiying<[email protected]> wrote:
Hi Felix,
Both KCS and eSPI driver are ready x86 platforms.
Please refer https://github.com/Intel-BMC/
Example:
BTW: you could set Acute travel logic to analyze eSPI bus. There is eSPI connector on Intel CRB platform.
Thanks,
Kwin.
Dear James/andrew/Oskar
Thanks a lot.
I am studying eSPI spec. But it's hard to find any products with eSPI. Your reply gives more understanding about eSPI.
Looking forward to more applications with eSPI in openbmc project. Thanks again.
BR
Felix
| |zhang_cy1989
|
|zhang_cy1989 at 163.com