Skip to contentSkip to conversation

u-boot-atmel-2020.01-a

GIT PULL Eugen.Hristev at microchip.com 2 participants 2 messages Oct 8, 2019 – Oct 9, 2019

lore
Share & tools
lore
#0 lore raw

Hello Tom,

Please pull tag u-boot-atmel-2020.01-a , the first set of new features for the 2020.01 release

The feature set includes support for two new boards from Microchip AT91:
The sama5d27_wlsom1_ek , an evaluation kit which includes the SAMA5D2 SOC packaged in a 256 MB LPDDR2 SIP, on a SOM including wireless, which is placed on evaluation kit with sd-card, ethernet, LCD, Camera sensor, QSPI, etc
The sam9x60ek, an evaluation kit for the new SoC based on ARM926j , the SAM9X60 . The evaluation kit includes NAND flash, QSPI, Ethernet, Audio, Camera sensor connector, etc.
The full support for sam9x60ek will come at a later time. There are still missing bits regarding the clock support and power management controller.

Thanks !
Eugen

The following changes since commit
61ba1244b548463dbfb3c5285b6b22e7c772c5bd:

Prepare v2019.10 (2019-10-07 17:14:02 -0400)

are available in the git repository at:

https://gitlab.denx.de/u-boot/custodians/u-boot-atmel.git
tags/u-boot-atmel-2020.01-a

for you to fetch changes up to 0cf837f34bd9de2c9cb2cb100f1e5f7e59826ac1:

configs: sam9x60ek: enable onewire support (2019-10-08 09:16:11
+0300)

----------------------------------------------------------------

First set of u-boot-atmel features and fixes for 2020.01 cycle

----------------------------------------------------------------

Eugen Hristev (17):

ARM: at91: sfr: convert to Kconfig

ARM: at91: sfr: implement DDR input buffers open function

board: laird: wb50n: use configure_ddrcfg_input_buffers

ARM: at91: mpddrc: add lpddr2 initialization procedure

board: atmel: sama5d2_wlsom1_ek: add SPL support

ARM: dts: at91: sama5d2: add seq for qspi1

ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspi

board: atmel: sama5d2_wlsom1_ek: add qspi support and qspi boot
config
board: atmel: sama5d27_wlsom1_ek: start green led in SPL

ARM: dts: at91: sama5d27_wlsom1: add hlcdc node

board: atmel: common: remove year from print message

configs: sama5d27_wlsom1_ek: add CONFIG_SPL_AT91_MCK_BYPASS

board: atmel: sama5d27_wlsom1_ek: fix SPL OFFS on SPI

ARM: dts: at91: sam9x60: add onewire node

ARM: dts: at91: sam9x60ek: add onewire support

board: atmel: sam9x60ek: add support for PDA detection

configs: sam9x60ek: enable onewire support

Nicolas Ferre (4):

ARM: at91: Add the chip ID for SAMA5D2 LPDDR2 SiP

board: atmel: add sama5d27_wlsom1_ek board

net: macb: Add sam9x60-macb compatibility string

ARM: dts: at91: sam9x60: Add macb0 Ethernet controller

Sandeep Sheriker Mallikarjun (5):

mmc: atmel_sdhci: Add sam9x60-sdhci compatibility string

ARM: at91: Add sam9x60 soc

ARM: dts: Add dts files for sam9x60ek

board: atmel: Add sam9x60ek board

configs: Add sam9x60ek_mmc_defconfig

Tudor Ambarus (7):

ARM: at91: Rename sama5_sfr.h to at91_sfr.h

ARM: at91: Add SFR definitions

board: sam9x60ek: Add NAND flash support

configs: Add sam9x60ek_nandflash_defconfig

configs: sam9x60ek: Add QSPI_BOOT defines

ARM: dts: at91: sam9x60ek: Enable qspi node

configs: Add sam9x60ek_qspiflash_defconfig

  arch/arm/dts/Makefile                              |   5 + 
  arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi   |  54 ++++ 
  arch/arm/dts/at91-sama5d27_wlsom1_ek.dts           | 148 ++++++++++ 
  arch/arm/dts/sam9x60.dtsi                          | 304 
+++++++++++++++++++++
  arch/arm/dts/sam9x60ek-u-boot.dtsi                 | 132 +++++++++ 
  arch/arm/dts/sam9x60ek.dts                         |  72 +++++ 
  arch/arm/dts/sama5d2.dtsi                          |   1 + 
  arch/arm/dts/sama5d27_wlsom1.dtsi                  |  78 ++++++ 
  arch/arm/mach-at91/Kconfig                         |  37 ++- 
  arch/arm/mach-at91/Makefile                        |   5 +- 
  arch/arm/mach-at91/arm926ejs/Makefile              |   1 + 
  arch/arm/mach-at91/arm926ejs/sam9x60_devices.c     | 125 +++++++++ 
  arch/arm/mach-at91/armv7/sama5d2_devices.c         |   8 + 
  arch/arm/mach-at91/armv7/sama5d4_devices.c         |   2 +- 
  arch/arm/mach-at91/atmel_sfr.c                     |  16 +- 
  arch/arm/mach-at91/include/mach/at91_common.h      |   3 + 
  .../include/mach/{sama5_sfr.h => at91_sfr.h}       |  52 +++- 

arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 23 ++

  arch/arm/mach-at91/include/mach/hardware.h         |   2 + 
  arch/arm/mach-at91/include/mach/sam9x60.h          | 169 ++++++++++++ 
  arch/arm/mach-at91/include/mach/sama5d2.h          |   4 + 
  arch/arm/mach-at91/mpddrc.c                        | 162 +++++++++++ 
  board/atmel/common/video_display.c                 |   2 +- 
  board/atmel/sam9x60ek/Kconfig                      |  12 + 
  board/atmel/sam9x60ek/MAINTAINERS                  |   9 + 
  board/atmel/sam9x60ek/Makefile                     |   7 + 
  board/atmel/sam9x60ek/sam9x60ek.c                  | 125 +++++++++ 
  board/atmel/sama5d27_wlsom1_ek/Kconfig             |  15 + 
  board/atmel/sama5d27_wlsom1_ek/MAINTAINERS         |   8 + 
  board/atmel/sama5d27_wlsom1_ek/Makefile            |   7 + 
  .../atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c  | 252 
+++++++++++++++++
  board/laird/wb50n/wb50n.c                          |   6 +- 
  configs/sam9x60ek_mmc_defconfig                    |  56 ++++ 
  configs/sam9x60ek_nandflash_defconfig              |  57 ++++ 
  configs/sam9x60ek_qspiflash_defconfig              |  79 ++++++ 
  configs/sama5d27_wlsom1_ek_mmc_defconfig           | 102 +++++++ 
  configs/sama5d27_wlsom1_ek_qspiflash_defconfig     | 117 ++++++++ 
  drivers/clk/at91/clk-utmi.c                        |   2 +- 
  drivers/mmc/atmel_sdhci.c                          |   1 + 
  drivers/net/macb.c                                 |   1 + 
  include/configs/sam9x60ek.h                        |  95 +++++++ 
  include/configs/sama5d27_wlsom1_ek.h               |  46 ++++ 
  42 files changed, 2386 insertions(+), 16 deletions(-) 

create mode 100644 arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi

create mode 100644 arch/arm/dts/at91-sama5d27_wlsom1_ek.dts

create mode 100644 arch/arm/dts/sam9x60.dtsi

create mode 100644 arch/arm/dts/sam9x60ek-u-boot.dtsi

create mode 100644 arch/arm/dts/sam9x60ek.dts

create mode 100644 arch/arm/dts/sama5d27_wlsom1.dtsi

create mode 100644 arch/arm/mach-at91/arm926ejs/sam9x60_devices.c

rename arch/arm/mach-at91/include/mach/{sama5_sfr.h => at91_sfr.h}
(53%)
create mode 100644 arch/arm/mach-at91/include/mach/sam9x60.h

create mode 100644 board/atmel/sam9x60ek/Kconfig

create mode 100644 board/atmel/sam9x60ek/MAINTAINERS

create mode 100644 board/atmel/sam9x60ek/Makefile

create mode 100644 board/atmel/sam9x60ek/sam9x60ek.c

create mode 100644 board/atmel/sama5d27_wlsom1_ek/Kconfig

create mode 100644 board/atmel/sama5d27_wlsom1_ek/MAINTAINERS

create mode 100644 board/atmel/sama5d27_wlsom1_ek/Makefile

create mode 100644 board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c

create mode 100644 configs/sam9x60ek_mmc_defconfig

create mode 100644 configs/sam9x60ek_nandflash_defconfig

create mode 100644 configs/sam9x60ek_qspiflash_defconfig

create mode 100644 configs/sama5d27_wlsom1_ek_mmc_defconfig

create mode 100644 configs/sama5d27_wlsom1_ek_qspiflash_defconfig

create mode 100644 include/configs/sam9x60ek.h

create mode 100644 include/configs/sama5d27_wlsom1_ek.h

#1 lore raw
Quoted 37 lines · Eugen.Hristev at microchip.com

Hello Tom,

Please pull tag u-boot-atmel-2020.01-a , the first set of new features for the 2020.01 release

The feature set includes support for two new boards from Microchip AT91:
The sama5d27_wlsom1_ek , an evaluation kit which includes the SAMA5D2 SOC packaged in a 256 MB LPDDR2 SIP, on a SOM including wireless, which is placed on evaluation kit with sd-card, ethernet, LCD, Camera sensor, QSPI, etc
The sam9x60ek, an evaluation kit for the new SoC based on ARM926j , the SAM9X60 . The evaluation kit includes NAND flash, QSPI, Ethernet, Audio, Camera sensor connector, etc.
The full support for sam9x60ek will come at a later time. There are still missing bits regarding the clock support and power management controller.

Thanks !
Eugen

The following changes since commit
61ba1244b548463dbfb3c5285b6b22e7c772c5bd:

   Prepare v2019.10 (2019-10-07 17:14:02 -0400) 

are available in the git repository at:

https://gitlab.denx.de/u-boot/custodians/u-boot-atmel.git
tags/u-boot-atmel-2020.01-a

Quoted 8 lines

for you to fetch changes up to 0cf837f34bd9de2c9cb2cb100f1e5f7e59826ac1:

   configs: sam9x60ek: enable onewire support (2019-10-08 09:16:11 

+0300)

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191009/2f721a85/attachment.sig>