Bluetooth: btusb: re-definition for board_id in struct qca_version
Subsystems (2)
PATCH v3 1/1 Bluetooth: btusb: re-definition for board_id in struct qca_version
As qc btsoc will using big-endian for boardID, so align host with it.
--- drivers/bluetooth/btusb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/bluetooth/btusb.c +2 -2
@@ -2883,7 +2883,7 @@ struct qca_version {__le32 rom_version;__le32 patch_version;__le32 ram_version; -__le16 board_id; +__u8 board_id[2 ];__le16 flag;__u8 reserved[4 ]; } __packed;
@@ -3072,7 +3072,7 @@ static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size,u16 flag =le16_to_cpu (ver->flag);if (((flag >>8 ) &0xff ) ==QCA_FLAG_MULTI_NVM ) { -u16 board_id =le16_to_cpu (ver->board_id); +u16 board_id = (ver->board_id[0 ] <<8 ) + ver->board_id[1 ];const char *variant;switch (le32_to_cpu (ver->ram_version)) {
Signature · 1 line
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Marcel Holtmann
maintainerHi Tim,
Quoted 21 lines
As qc btsoc will using big-endian for boardID, so align host with it.
Signed-off-by Tim Jiang <[email protected]>---
drivers/bluetooth/btusb.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)drivers/bluetooth/btusb.c +1
-1@@ -2883,7 +2883,7 @@ struct qca_version {__le32 rom_version;__le32 patch_version;__le32 ram_version; -__le16 board_id; +__u8 board_id[2 ];__le16 flag;__u8 reserved[4 ]; } __packed;
drivers/bluetooth/btusb.c static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size, · line 3078
Quoted 8 lines
drivers/bluetooth/btusb.c +1
-1@@ -3072,7 +3072,7 @@ static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size,u16 flag =le16_to_cpu (ver->flag);if (((flag >>8 ) &0xff ) ==QCA_FLAG_MULTI_NVM ) { -u16 board_id =le16_to_cpu (ver->board_id); +u16 board_id = (ver->board_id[0 ] <<8 ) + ver->board_id[1 ];const char *variant;switch (le32_to_cpu (ver->ram_version)) {
explain to me why I would merge this. The commit message is sparse even after I asked to explain things.
I am also not merging this handwaving endian handling. Define it is be16 or le16 and clearly state what it is. If Qualcomm screwed up the memory layout of their NVM, then say that.
Regards
Marcel
Hi Marcel:
the following is the explanation from qc btsoc team:
The board ID should be split into two bytes.
The 1st byte is chip ID, and the 2nd byte is platform ID.
For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID. Currently we have several platforms, and platform IDs are continuously added. We would not distinguish different chips if we get these mixed up. Platform ID:
• 0x00 is for Mobile • 0x01 is for X86( ID # from 257) • 0x02 is for Automotive(ID# from 513 ) • 0x03 is for Consumer electronic( ID# from 769)
…
regards.
tim
Quoted 43 lines · Marcel Holtmann
Hi Tim,
Quoted 29 lines
As qc btsoc will using big-endian for boardID, so align host with it.
Signed-off-by Tim Jiang <[email protected]>---
drivers/bluetooth/btusb.c| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)drivers/bluetooth/btusb.c +2
-2@@ -2883,7 +2883,7 @@ struct qca_version {__le32 rom_version;__le32 patch_version;__le32 ram_version; -__le16 board_id; +__u8 board_id[2 ];__le16 flag;__u8 reserved[4 ]; } __packed;@@ -3072,7 +3072,7 @@ static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size, u16 flag = le16_to_cpu(ver->flag);if (((flag >>8 ) &0xff ) ==QCA_FLAG_MULTI_NVM ) { -u16 board_id =le16_to_cpu (ver->board_id); +u16 board_id = (ver->board_id[0 ] <<8 ) + ver->board_id[1 ];const char *variant;Quoted 1 line
switch (le32_to_cpu(ver->ram_version)) {explain to me why I would merge this. The commit message is sparse even after I asked to explain things.
I am also not merging this handwaving endian handling. Define it is be16 or le16 and clearly state what it is. If Qualcomm screwed up the memory layout of their NVM, then say that.
Regards
Marcel
Marcel Holtmann
maintainerHi Tim,
Quoted 8 lines
the following is the explanation from qc btsoc team:
The board ID should be split into two bytes.
The 1st byte is chip ID, and the 2nd byte is platform ID.
For example, board ID0x010A,0x01is platform ID.0x0Ais chip ID. Currently we have several platforms, and platform IDs are continuously added. We would not distinguish different chips if we get these mixed up. Platform ID:
Quoted 5 lines
• 0x00 is for Mobile • 0x01 is for X86( ID # from 257) • 0x02 is for Automotive(ID# from 513 ) • 0x03 is for Consumer electronic( ID# from 769)…
then use u8 chip_id and u8 platform_id in the data structure and add description like above when you combine chip_id and platform_id into board_id.
Regards
Marcel