Skip to contentSkip to conversation

QoS and arp packets.

LARTC George Alexandru Dragoi 2 participants 2 messages Nov 5, 2004 – Nov 30, 2004

lore
Share & tools
lore
#0 lore raw

Hello list,

I'm having problems with HTB on a machine. I noticed that after a while the machine seems off-line after i start the htb script. After some debugging i realised the problem stays in the arp packets send by the machine, which are delayed or dropped. Because of that i had to remove the default class. Is there a way to match arp packets ? because i want to add them to the class destinated for the machine itself.

Thanks in advance.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · George Alexandru Dragoi

Hello list,

I'm having problems with HTB on a machine. I noticed that after a while the machine seems off-line after i start the htb script. After some debugging i realised the problem stays in the arp packets send by the machine, which are delayed or dropped. Because of that i had to remove the default class. Is there a way to match arp packets ? because i want to add them to the class destinated for the machine itself.

Someone recently posted this - but you may not need it if you can make your rules specifically mark/shape protocol IP or TCP etc.

Andy.

Quoted 11 lines

I'm using this because it works:
# Example that matches ARP (a big "thank you" to Martin Brown for this!):

# dst MAC is 6 bytes at -14
# src MAC is 6 bytes at -8
# the ARP protocol is 2 bytes at -2
# the "0806" comes from linux/include/linux/if_ether.h
tc filter add dev eth1 parent 1: protocol ip prio 5 u32 \
   match u16 0x0806 0xffff at -2 flowid 1:50

gypsy

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/