Skip to contentSkip to conversation

cfi_flash.c

U-Boot-Users claudio123 2 participants 2 messages Mar 1, 2006

lore
Share & tools
lore

claudio123

author
#0 lore raw

I am looking for a flash driver that would work with both the new flash part (J3D)supported by cfi_flash.c and the old flash (28F256J3C), or better yet a driver that would support the flash parts supported by new cfi_flash .c as well as the old parts supported by flash.c and flash64.c
--
View this message in context: http://www.nabble.com/cfi_flash.c-t1203253.html#a3176526
Sent from the Uboot - Users forum at Nabble.com.

#1 lore raw
Quoted 5 lines · In message <[email protected]> you wrote:

I am looking for a flash driver that would work with both the new flash part (J3D)supported by cfi_flash.c and the old flash (28F256J3C), or better yet a driver that would support the flash parts supported by new cfi_flash .c as well as the old parts supported by flash.c and flash64.c

You should be a bit more specific. Which "flash.c"? There are nearly 200 files by that name in the U-Boot tree!

In general, you should use the CFI driver and fix any problems / add any code that might be missing there.

Best regards,

Wolfgang Denk

Signature · 6 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
They weren't that important. They were merely at the top. The  people
who  really  run organizations are usually found several levels down,
where it's still possible to get things done.
                                      - Terry Pratchett, _Small Gods_