Skip to contentSkip to conversation

PROBLEM: IM Kernel Failure 12/11/07

DISCUSSION [email protected] 3 participants 3 messages Nov 14, 2007

lore
Share & tools
lore
#0 lore raw

This is the 5th attempt to email you! I keep being Greylisted! I've extracted the minimal info from a zip which may be failing.

I've had to send it from my personal Tiscali account.

Regards
Martin

[1.] One line summary of the problem:

System crashed the night of Monday Nov 12 at 22:01

[2.] Full description of the problem/report:

	There is a cronjob at that time

	00 22 * * * . /usr/local/bin/backup_RCP_CVSROOT.sh > 

/usr/local/bin/cvs_backup.log 2>&1

[3.] Keywords (i.e., modules, networking, kernel):

kernel

[4.] Kernel version (from /proc/version):

Linux version 2.4.9-e.38smp ([email protected]) (gcc
version 2.96 20000731 (Red Hat Linux 7.2 2.96-124.7.2)) #1 SMP Wed Feb 11 00:09:01 EST 2004

[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)

NO OOPS'ES !

vi ./usr/src/linux-2.4.9-e.3/Documentation/oops-tracing.txt

will investigate ... not ... intuitive at first read!

[6.] A small shell script or example program which triggers the problem (if possible)

	N/A

[7.] Environment

Er ... a Dell box I think!

[7.1.] Software (add the output of the ver_linux script here)

[root@pleco /]# sh ./usr/src/linux-2.4.9-e.3/scripts/ver_linux

If some fields are empty or look unusual you may have an old version.

Compare to the current minimal requirements in Documentation/Changes.

Linux pleco.investmaster.com 2.4.9-e.38smp #1 SMP Wed Feb 11 00:09:01 EST 2004 i686 unknown

Gnu C                  2.96
Gnu make               3.79.1
binutils               2.11.90.0.8
util-linux             2.11f
mount                  2.11g
modutils               2.4.13
e2fsprogs              1.26
reiserfsprogs          3.x.0j
PPP                    2.4.1
isdn4k-utils           3.1pre1
Linux C Library        2.2.4
Dynamic linker (ldd)   2.2.4
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.3.3
Sh-utils               2.0.11
Modules Loaded         soundcore ide-tape lp parport sr_mod ide-cd 

cdrom sg esm autofs nfs lockd sunrpc ppp_async ppp_generic slhc tg3 ipchains st usb-ohci usbcore ext3 jbd aic7xxx sd_mod scsi_mod

[7.2.] Processor information (from vi /proc/cpuinfo):

processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4757.91

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02

processor : 2
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02

processor : 3
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 9
cpu MHz : 2386.846
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02

[7.3.] Module information (from vi /proc/modules):

soundcore               7940   0 (autoclean)
ide-tape               61120   0 (autoclean)
lp                      8192   0 (autoclean)
parport                38144   0 (autoclean) [lp]
sr_mod                 17560   0 (autoclean) (unused)
ide-cd                 35296   0 (autoclean)
cdrom                  35520   0 (autoclean) [sr_mod ide-cd]
sg                     35076   0 (autoclean)
esm                    84239   1
autofs                 13796   0 (autoclean) (unused)
nfs                    98592   2 (autoclean)
lockd                  61184   1 (autoclean) [nfs]
sunrpc                 84432   1 (autoclean) [nfs lockd]
ppp_async               8480   1
ppp_generic            26664   3 [ppp_async]
slhc                    6776   0 [ppp_generic]
tg3                    50528   1
ipchains               47760   0
st                     30548   0
usb-ohci               23456   0 (unused)
usbcore                68864   1 [usb-ohci]
ext3                   70944   4
jbd                    55444   4 [ext3]
aic7xxx               127200   5
sd_mod                 13920   5
scsi_mod              126812   5 [sr_mod sg st aic7xxx sd_mod]

[7.4.] Loaded driver and hardware information (vi /proc/ioports, vi /proc/iomem)

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
08b0-08bf : ServerWorks CSB5 IDE Controller
08c0-08c7 : ServerWorks CSB5 IDE Controller
08c8-08cb : ServerWorks CSB5 IDE Controller
08d0-08d7 : ServerWorks CSB5 IDE Controller
08d8-08db : ServerWorks CSB5 IDE Controller
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #05
a800-a8ff : Adaptec 7899P (#2)

    a800-a8fe : aic7xxx
  ac00-acff : Adaptec 7899P
    ac00-acfe : aic7xxx

d800-d8ff : Adaptec 7899A (#2)
d800-d8fe : aic7xxx
dc00-dcff : Adaptec 7899A
dc00-dcfe : aic7xxx
e800-e8ff : ATI Technologies Inc Rage XL
ec80-ecbf : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
ec80-ec87 : serial(set)
ece8-ecef : PCI device 1028:000c (Dell Computer Corporation) ecf4-ecf7 : PCI device 1028:000d (Dell Computer Corporation) ecf8-ecff : PCI device 1028:000c (Dell Computer Corporation)

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: ServerWorks: Unknown device 0014 (rev 33)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:00.1 Host bridge: ServerWorks: Unknown device 0014
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:00.2 Host bridge: ServerWorks: Unknown device 0014
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:04.0 Class ff00: Dell Computer Corporation: Unknown device 000c
Subsystem: Dell Computer Corporation: Unknown device 000c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32, cache line size 10
Interrupt: pin A routed to IRQ 19
Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at ecf8 [size=8]
Region 2: I/O ports at ece8 [size=8]
Expansion ROM at fe000000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.1 Class ff00: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
Subsystem: Dell Computer Corporation PowerEdge Expandable RAID
Controller 3/Di
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe102000 (32-bit, non-prefetchable)
[size=4K]

        Region 1: I/O ports at ec80 [size=64]
        Region 2: Memory at feb00000 (32-bit, prefetchable) 

[size=512K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.2 Class ff00: Dell Computer Corporation: Unknown device 000d
Subsystem: Dell Computer Corporation: Unknown device 000d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Interrupt: pin C routed to IRQ 27
Region 0: I/O ports at ecf4 [size=4]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev
27) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (2000ns min), cache line size 10
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) 
[size=16M]
        Region 1: I/O ports at e800 [size=256]
        Region 2: Memory at fe101000 (32-bit, non-prefetchable) 

[size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
Subsystem: ServerWorks CSB5 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort+ >SERR- <PERR-

        Latency: 32

00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog- if 82 [Master PriP])
Subsystem: ServerWorks CSB5 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 64
        Region 0: I/O ports at 08c0 [size=8]
        Region 1: I/O ports at 08c8 [size=4]
        Region 2: I/O ports at 08d0 [size=8]
        Region 3: I/O ports at 08d8 [size=4]
        Region 4: I/O ports at 08b0 [size=16]

00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev
05) (prog-if 10 [OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (20000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at fe100000 (32-bit, non-prefetchable) 

[size=4K]

00:0f.3 ISA bridge: ServerWorks: Unknown device 0225
Subsystem: ServerWorks: Unknown device 0230
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 0

00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort+ >SERR- <PERR-

Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort+ >SERR- <PERR-

Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort+ >SERR- <PERR-

Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort+ >SERR- <PERR-

Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

01:08.0 SCSI storage controller: Adaptec 7899A (rev 01)
Subsystem: Adaptec: Unknown device f620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (10000ns min, 6250ns max), cache line size 10
        Interrupt: pin A routed to IRQ 20
        BIST result: 00
        Region 0: I/O ports at dc00 [size=256]
        Region 1: Memory at fcf01000 (64-bit, non-prefetchable) 
[size=4K]
        Expansion ROM at fce00000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,

D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:08.1 SCSI storage controller: Adaptec 7899A (rev 01)
Subsystem: Adaptec: Unknown device f620
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (10000ns min, 6250ns max), cache line size 10
        Interrupt: pin B routed to IRQ 21
        BIST result: 00
        Region 0: I/O ports at d800 [size=256]
        Region 1: Memory at fcf00000 (64-bit, non-prefetchable) 
[size=4K]
        Expansion ROM at fce00000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,

D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

03:06.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a7 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (16000ns min), cache line size 10
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at fcd10000 (64-bit, non-prefetchable) 

[size=64K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-

                Address: 3ccb5f8345104190  Data: 2bd9

03:08.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a7 (rev 02)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

        Latency: 64 (16000ns min), cache line size 10
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at fcd00000 (64-bit, non-prefetchable) 

[size=64K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-

                Address: 5cbcd7d402670c00  Data: e809

04:08.0 PCI bridge: Intel Corporation: Unknown device 0309 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fca00000-fcbfffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:06.0 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin A routed to IRQ 30
BIST result: 00
Region 0: I/O ports at ac00 [size=256]
Region 1: Memory at fcaff000 (64-bit, non-prefetchable)
[size=4K]

        Expansion ROM at fcb00000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,

D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:06.1 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin B routed to IRQ 31
BIST result: 00
Region 0: I/O ports at a800 [size=256]
Region 1: Memory at fcafe000 (64-bit, non-prefetchable)
[size=4K]

        Expansion ROM at fcb00000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,

D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[7.6.] SCSI information (from vi /proc/scsi/scsi)

Attached devices:
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: BNCHMARK Model: DLT1 Rev: 5538
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 02 Lun: 00
Vendor: MAXTOR Model: ATLAS10K4_73SCA Rev: DFM0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: PE/PV Model: 1x5 SCSI BP Rev: 1.1
Type: Processor ANSI SCSI revision: 02

[7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant):

I dread to think!

[X.] Other notes, patches, fixes, workarounds:

extract from msgNov12.lis (attached)

[root@pleco sysconfig]# grep "Nov 12" /var/log/messages > msgNov12.
lis

Line no.

437 Nov 12 04:02:01 pleco syslogd 1.4.1: restart.

1282 Nov 12 11:42:05 pleco sshd(pam_unix)[18121]: session opened for
user oracle by (uid=0)
1373 Nov 12 12:36:03 pleco pam_rhosts_auth[18283]: allowed to
jnijjar@bloater as wmfo
1374 Nov 12 12:36:03 pleco rsh(pam_unix)[18283]: session opened for
user wmfo by (uid=0)
1375 Nov 12 12:36:03 pleco rsh(pam_unix)[18283]: session closed for
user wmfo
1376 Nov 12 12:36:03 pleco pam_rhosts_auth[18285]: allowed to
jnijjar@bloater as wmfo
1377 Nov 12 12:36:03 pleco rsh(pam_unix)[18285]: session opened for
user wmfo by (uid=0)
1378 Nov 12 12:36:03 pleco rsh(pam_unix)[18285]: session closed for
user wmfo
1379 Nov 12 12:36:03 pleco pam_rhosts_auth[18287]: allowed to
jnijjar@bloater as wmfo
1380 Nov 12 12:36:03 pleco rsh(pam_unix)[18287]: session opened for
user wmfo by (uid=0)
1381 Nov 12 12:36:03 pleco pam_rhosts_auth[18288]: allowed to
jnijjar@bloater as wmfo
1382 Nov 12 12:36:03 pleco rsh(pam_unix)[18288]: session opened for
user wmfo by (uid=0)
1383 Nov 12 12:36:03 pleco pam_rhosts_auth[18289]: allowed to
jnijjar@bloater as wmfo
1384 Nov 12 12:36:03 pleco rsh(pam_unix)[18289]: session opened for
user wmfo by (uid=0)
1385 Nov 12 12:36:03 pleco rsh(pam_unix)[18289]: session closed for
user wmfo
1386 Nov 12 12:36:03 pleco pam_rhosts_auth[18292]: allowed to
jnijjar@bloater as wmfo
1387 Nov 12 12:36:03 pleco rsh(pam_unix)[18292]: session opened for
user wmfo by (uid=0)
1388 Nov 12 12:36:03 pleco rsh(pam_unix)[18292]: session closed for
user wmfo
1389 Nov 12 12:36:03 pleco pam_rhosts_auth[18295]: allowed to
jnijjar@bloater as wmfo
1390 Nov 12 12:36:04 pleco rsh(pam_unix)[18295]: session opened for
user wmfo by (uid=0)
1391 Nov 12 12:36:06 pleco rsh(pam_unix)[18295]: session closed for
user wmfo
1392 Nov 12 12:36:06 pleco pam_rhosts_auth[18362]: allowed to
jnijjar@bloater as wmfo
1393 Nov 12 12:36:06 pleco rsh(pam_unix)[18362]: session opened for
user wmfo by (uid=0)
1394 Nov 12 12:36:09 pleco rsh(pam_unix)[18362]: session closed for
user wmfo
1395 Nov 12 12:36:09 pleco pam_rhosts_auth[18417]: allowed to
jnijjar@bloater as wmfo
1396 Nov 12 12:36:09 pleco rsh(pam_unix)[18417]: session opened for
user wmfo by (uid=0)
1397 Nov 12 12:36:22 pleco rsh(pam_unix)[18417]: session closed for
user wmfo
1398 Nov 12 12:36:22 pleco pam_rhosts_auth[18510]: allowed to
jnijjar@bloater as wmfo
1399 Nov 12 12:36:22 pleco rsh(pam_unix)[18510]: session opened for
user wmfo by (uid=0)
1400 Nov 12 12:36:22 pleco rsh(pam_unix)[18510]: session closed for
user wmfo
1401 Nov 12 12:36:22 pleco pam_rhosts_auth[18513]: allowed to
jnijjar@bloater as wmfo
1402 Nov 12 12:36:22 pleco rsh(pam_unix)[18513]: session opened for
user wmfo by (uid=0)
1403 Nov 12 12:36:22 pleco pam_rhosts_auth[18514]: allowed to
jnijjar@bloater as wmfo
1404 Nov 12 12:36:22 pleco rsh(pam_unix)[18514]: session opened for
user wmfo by (uid=0)

1549 Nov 12 13:55:02 pleco login(pam_unix)[18605]: authentication
failure; logname= uid=0 euid=0 tty=pts/2 ruser= rhost=portwrinkle user=cvsadmin
1550 Nov 12 13:55:04 pleco login[18605]: FAILED LOGIN 1 FROM
portwrinkle FOR cvsadmin, Authentication failure
1551 Nov 12 13:55:16 pleco login[18605]: FAILED LOGIN 2 FROM
portwrinkle FOR cvsadmin, Authentication failure
1552 Nov 12 13:56:32 pleco login(pam_unix)[18609]: session opened
for user cvsadmin by (uid=0)
1553 Nov 12 13:56:32 pleco -- cvsadmin[18609]: LOGIN ON pts/2 BY
cvsadmin FROM portwrinkle

1788 Nov 12 15:59:30 pleco su(pam_unix)[18908]: session opened for
user root by oracle(uid=502)
1789 Nov 12 16:00:21 pleco su(pam_unix)[18908]: session closed for
user root
1790 Nov 12 16:00:44 pleco su(pam_unix)[18978]: session opened for
user root by oracle(uid=502)
1809 Nov 12 16:04:32 pleco su(pam_unix)[19029]: session opened for
user oracle by oracle(uid=0)
1810 Nov 12 16:04:32 pleco su(pam_unix)[19029]: session closed for
user oracle

1811	Nov  12	16:04:32  pleco	vncserver: vncserver shutdown failed
1812	Nov  12	16:04:42  pleco	su(pam_unix)[19051]: session opened for 
user oracle by oracle(uid=0)
1813	Nov  12	16:04:42  pleco	su: A VNC server is already running as :1
1814	Nov  12	16:04:42  pleco	su(pam_unix)[19051]: session closed for 
user oracle
1815	Nov  12	16:04:43  pleco	vncserver: vncserver start failed
1816	Nov  12	16:04:54  pleco	su(pam_unix)[19073]: session opened for 
user oracle by oracle(uid=0)
1817	Nov  12	16:04:54  pleco	su(pam_unix)[19073]: session closed for 
user oracle
1818	Nov  12	16:04:54  pleco	vncserver: vncserver shutdown failed
1819	Nov  12	16:04:55  pleco	su(pam_unix)[18978]: session closed for 

user root
1820 Nov 12 16:05:10 pleco su(pam_unix)[19082]: session opened for
user root by oracle(uid=502)
1821 Nov 12 16:05:14 pleco su(pam_unix)[19124]: session opened for
user oracle by oracle(uid=0)
1822 Nov 12 16:05:14 pleco su(pam_unix)[19124]: session closed for
user oracle

1823	Nov  12	16:05:14  pleco	vncserver: vncserver shutdown failed
1824	Nov  12	16:05:19  pleco	su(pam_unix)[19146]: session opened for 
user oracle by oracle(uid=0)
1825	Nov  12	16:05:20  pleco	su: A VNC server is already running as :1
1826	Nov  12	16:05:20  pleco	su(pam_unix)[19146]: session closed for 
user oracle
1827	Nov  12	16:05:20  pleco	vncserver: vncserver start failed
1828	Nov  12	16:05:26  pleco	su(pam_unix)[19082]: session closed for 

user root
1829 Nov 12 16:05:28 pleco sshd(pam_unix)[18121]: session closed for
user oracle

2014 Nov 12 17:29:37 pleco sshd(pam_unix)[19263]: session opened for
user oracle by (uid=0)

2059 Nov 12 17:47:10 pleco su(pam_unix)[19329]: session opened for
user root by oracle(uid=502)
2060 Nov 12 17:48:21 pleco su(pam_unix)[19329]: session closed for
user root

2071	Nov  12	17:52:02  pleco	gnome-name-server[19450]: starting
2072	Nov  12	17:52:02  pleco	gnome-name-server[19450]: name server 

starting
2077 Nov 12 17:52:04 pleco gconfd (oracle-19457): starting (version
1.0.4), pid 19457 user 'oracle'
2078 Nov 12 17:52:04 pleco gconfd (oracle-19457): Successfully
registered `OAFIID:gconfd:19991118'
2079 Nov 12 17:52:04 pleco gconfd (oracle-19457): Unable to open
saved state file '/usr/oracle/.gconfd/saved_state': No such file or directory
2080 Nov 12 17:52:04 pleco xinetd[19469]: warning: can't get client
address: Transport endpoint is not connected
2089 Nov 12 17:57:04 pleco gconfd (oracle-19457): 1 items remain in
the cache after cleaning already-synced items older than 300 seconds

2198 Nov 12 18:46:45 pleco su(pam_unix)[19650]: session opened for
user root by oracle(uid=502)
2199 Nov 12 18:46:54 pleco su(pam_unix)[19650]: session closed for
user root
2200 Nov 12 18:47:34 pleco sshd(pam_unix)[19263]: session closed for
user oracle

2247 Nov 12 19:06:54 pleco sshd(pam_unix)[19997]: session opened for
user oracle by (uid=0)

2272 Nov 12 19:13:26 pleco su(pam_unix)[20050]: session opened for
user root by oracle(uid=502)
2273 Nov 12 19:13:34 pleco su(pam_unix)[20092]: session opened for
user oracle by oracle(uid=0)
2274 Nov 12 19:13:34 pleco gnome-name-server[19450]: input condition
is: 0x11, exiting
2275 Nov 12 19:13:34 pleco su(pam_unix)[20092]: session closed for
user oracle

2276	Nov  12	19:13:34  pleco	vncserver: vncserver shutdown succeeded
2277	Nov  12	19:14:03  pleco	su(pam_unix)[20132]: session opened for 
user oracle by oracle(uid=0)
2278	Nov  12	19:14:06  pleco	su:	
2279	Nov  12	19:14:06  pleco	su: New 'X' desktop is pleco.investmaster.
com:2
2280	Nov  12	19:14:06  pleco	su:	
2281	Nov  12	19:14:06  pleco	su: Starting ap	plications specified in 
/usr/oracle/.vnc/xstartup
2282	Nov  12	19:14:06  pleco	su: Log file is/usr/oracle/.vnc/pleco.
investmaster.com:2.log
2283	Nov  12	19:14:06  pleco	su:	
2284	Nov  12	19:14:06  pleco	su(pam_unix)[20	132]: session closed for 
user oracle
2285	Nov  12	19:14:06  pleco	vncserver: vncserver startup succeeded
2286	Nov  12	19:14:09  pleco	gnome-name-server[20198]: starting
2287	Nov  12	19:14:09  pleco	gnome-name-server[20198]: name server 

starting
2288 Nov 12 19:14:12 pleco su(pam_unix)[20050]: session closed for
user root
2289 Nov 12 19:14:25 pleco su(pam_unix)[20325]: session opened for
user root by oracle(uid=502)
2290 Nov 12 19:14:33 pleco su(pam_unix)[20325]: session closed for
user root
2291 Nov 12 19:14:38 pleco sshd(pam_unix)[19997]: session closed for
user oracle
2292 Nov 12 19:17:04 pleco gconfd (oracle-19457): 1 items remain in
the cache after cleaning already-synced items older than 300 seconds

2639 Nov 12 22:01:37 pleco kernel: Unable to handle kernel paging
request at virtual address 1aaf2008

2640	Nov  12	22:01:37  pleco	kernel: printing eip:
2641	Nov  12	22:01:37  pleco	kernel: c01315df
2642	Nov  12	22:01:37  pleco	kernel: *pde = 0
2643	Nov  12	22:01:37  pleco	kernel: Oops: 00
2644	Nov  12	22:01:37  pleco	kernel: Kernel 2.4.9-e.38smp
2645	Nov  12	22:01:37  pleco	kernel: CPU: 0
2646	Nov  12	22:01:37  pleco	kernel: EIP: 0010:
[do_generic_file_read+463/1680]    Tainted: P
2647	Nov  12	22:01:37  pleco	kernel: EIP: 0010:[<c01315df>]    
Tainted: P
2648	Nov  12	22:01:37  pleco	kernel: EFLAGS:	10206
2649	Nov  12	22:01:37  pleco	kernel: EIP isat do_generic_file_read 

[kernel] 0x1cf
2650 Nov 12 22:01:37 pleco kernel: eax: 1aaf2000 ebx: 00000001
ecx: 00000013 edx: f77d5378
2651 Nov 12 22:01:37 pleco kernel: esi: 00000000 edi: e43e8d38
ebp: 00000000 esp: e2525ef8

2652	Nov  12	22:01:37  pleco	kernel: ds: 0018   es: 0018   ss: 0018
2653	Nov  12	22:01:37  pleco	kernel: Processtar (pid: 20836, 

stackpage=e2525000)
2654 Nov 12 22:01:37 pleco kernel: Stack: 00001000 f77d537c 00000001
00000000 00000000 e43e8c80 00000322 e43e8c80
2655 Nov 12 22:01:37 pleco kernel: 00000004 00008001 00000000
0806f528 00000000 00001600 c0131c27 cc263bc0
2656 Nov 12 22:01:37 pleco kernel: cc263be0 e2525f48 c0131aa0
00000000 00000000 00001600 0806f528 00000000
2657 Nov 12 22:01:37 pleco kernel: Call Trace:
[generic_file_new_read+103/128] generic_file_new_read [kernel] 0x67 (0xe2525f30)
2658 Nov 12 22:01:37 pleco kernel: Call Trace: [<c0131c27>]
generic_file_new_read [kernel] 0x67 (0xe2525f30)
2659 Nov 12 22:01:37 pleco kernel: [file_read_actor+0/256]
file_read_actor [kernel] 0x0 (0xe2525f40)
2660 Nov 12 22:01:37 pleco kernel: [<c0131aa0>] file_read_actor
[kernel] 0x0 (0xe2525f40)
2661 Nov 12 22:01:38 pleco kernel: [generic_file_read+27/32]
generic_file_read [kernel] 0x1b (0xe2525f64)
2662 Nov 12 22:01:38 pleco kernel: [<c0131bbb>] generic_file_read
[kernel] 0x1b (0xe2525f64)
2663 Nov 12 22:01:38 pleco kernel: [sys_red+150/288] sys_read
[kernel] 0x96 (0xe2525f7c)
2664 Nov 12 22:01:38 pleco kernel: [<c0145cd6>] sys_read [kernel]
0x96 (0xe2525f7c)
2665 Nov 12 22:01:38 pleco kernel: [sys_open+149/224] sys_open
[kernel] 0x95 (0xe2525fa4)
2666 Nov 12 22:01:38 pleco kernel: [<c01456e5>] sys_open [kernel]
0x95 (0xe2525fa4)
2667 Nov 12 22:01:38 pleco kernel: [system_call+51/56] system_call
[kernel] 0x33 (0xe2525fc0)
2668 Nov 12 22:01:38 pleco kernel: [<c01073e3>] system_call [kernel]
0x33 (0xe2525fc0)

2669	Nov  12	22:01:38  pleco	kernel:	
2670	Nov  12	22:01:38  pleco	kernel:	
2671	Nov  12	22:01:38  pleco	kernel: Code: 3	9 78 08 75 f4 39 68 0c 75 

ef 89 c6 85 f6 0f 84 8d 02 00 00

	Nov  13	14:36:33  pleco syslogd 1.4.1: restart.	

Martin Peter Clarke - Oracle DBA
Investmaster Group Ltd
5 Granville Road
Leicester
LE1 7RU

Direct Line: +44 (0)116 224 5033

Mob: +44 (0)7776 306523

Switchboard: +44 (0)116 233 5050
Fax: +44 (0)116 255 0822

__________________________________________________
Get an exclusive discount on Norton 360 from Tiscali
http://www.tiscali.co.uk/products/securepc

#1 lore raw
Quoted 2 lines · On Nov 14, 2007 7:59 AM, [email protected]…

This is the 5th attempt to email you! I keep being Greylisted! I've extracted the minimal info from a zip which may be failing.

Yeah, don't send .zip files to the list.

Quoted 4 lines

[5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt)

NO OOPS'ES !

There is, actually. See below.

Quoted 2 lines

Linux pleco.investmaster.com 2.4.9-e.38smp #1 SMP Wed Feb 11 00:09:01 EST 2004 i686 unknown

This is a somewhat ancient kernel. That said, has it been running fine until recently? If so, you may want to investigate hardware issues (failing power supply, bad RAM). Regardless, you may want to check if updated kernels are available for that distribution. (RedHat Enterprise Edition?)

Quoted 35 lines

2639 Nov 12 22:01:37 pleco kernel: Unable to handle kernel paging
request at virtual address 1aaf2008

2640    Nov  12 22:01:37  pleco kernel: printing eip:
2641    Nov  12 22:01:37  pleco kernel: c01315df
2642    Nov  12 22:01:37  pleco kernel: *pde = 0
2643    Nov  12 22:01:37  pleco kernel: Oops: 00
2644    Nov  12 22:01:37  pleco kernel: Kernel 2.4.9-e.38smp
2645    Nov  12 22:01:37  pleco kernel: CPU: 0
2646    Nov  12 22:01:37  pleco kernel: EIP: 0010:
[do_generic_file_read+463/1680]    Tainted: P
2647    Nov  12 22:01:37  pleco kernel: EIP: 0010:[<c01315df>]
Tainted: P
2648    Nov  12 22:01:37  pleco kernel: EFLAGS: 10206
2649    Nov  12 22:01:37  pleco kernel: EIP isat do_generic_file_read

[kernel] 0x1cf
2650 Nov 12 22:01:37 pleco kernel: eax: 1aaf2000 ebx: 00000001
ecx: 00000013 edx: f77d5378
2651 Nov 12 22:01:37 pleco kernel: esi: 00000000 edi: e43e8d38
ebp: 00000000 esp: e2525ef8

2652    Nov  12 22:01:37  pleco kernel: ds: 0018   es: 0018   ss: 0018
2653    Nov  12 22:01:37  pleco kernel: Processtar (pid: 20836,

stackpage=e2525000)
2654 Nov 12 22:01:37 pleco kernel: Stack: 00001000 f77d537c 00000001
00000000 00000000 e43e8c80 00000322 e43e8c80
2655 Nov 12 22:01:37 pleco kernel: 00000004 00008001 00000000
0806f528 00000000 00001600 c0131c27 cc263bc0
2656 Nov 12 22:01:37 pleco kernel: cc263be0 e2525f48 c0131aa0
00000000 00000000 00001600 0806f528 00000000
2657 Nov 12 22:01:37 pleco kernel: Call Trace:
[generic_file_new_read+103/128] generic_file_new_read [kernel] 0x67 (0xe2525f30)
2658 Nov 12 22:01:37 pleco kernel: Call Trace: [<c0131c27>]
generic_file_new_read [kernel] 0x67 (0xe2525f30)
2659 Nov 12 22:01:37 pleco kernel: [file_read_actor+0/256]
file_read_actor [kernel] 0x0 (0xe2525f40)

Quoted 8 lines

2660 Nov 12 22:01:37 pleco kernel: [<c0131aa0>] file_read_actor
[kernel] 0x0 (0xe2525f40)
2661 Nov 12 22:01:38 pleco kernel: [generic_file_read+27/32]
generic_file_read [kernel] 0x1b (0xe2525f64)
2662 Nov 12 22:01:38 pleco kernel: [<c0131bbb>] generic_file_read
[kernel] 0x1b (0xe2525f64)
2663 Nov 12 22:01:38 pleco kernel: [sys_red+150/288] sys_read
[kernel] 0x96 (0xe2525f7c)

"sys_red"?

Quoted 10 lines

2664 Nov 12 22:01:38 pleco kernel: [<c0145cd6>] sys_read [kernel]
0x96 (0xe2525f7c)
2665 Nov 12 22:01:38 pleco kernel: [sys_open+149/224] sys_open
[kernel] 0x95 (0xe2525fa4)
2666 Nov 12 22:01:38 pleco kernel: [<c01456e5>] sys_open [kernel]
0x95 (0xe2525fa4)
2667 Nov 12 22:01:38 pleco kernel: [system_call+51/56] system_call
[kernel] 0x33 (0xe2525fc0)
2668 Nov 12 22:01:38 pleco kernel: [<c01073e3>] system_call [kernel]
0x33 (0xe2525fc0)

Quoted 4 lines
2669    Nov  12 22:01:38  pleco kernel:
2670    Nov  12 22:01:38  pleco kernel:
2671    Nov  12 22:01:38  pleco kernel: Code: 3 9 78 08 75 f4 39 68 0c 75

ef 89 c6 85 f6 0f 84 8d 02 00 00

And there's the oops, which'll have to be interpreted by someone with better kernel skills than I have, I'm afraid.

Ray