Skip to contentSkip to conversation

nvme-fabrics: reject I/O to offline device

PATCH Superseded Victor Gladkov 4 participants 9 messages Sep 29, 2020 – Nov 20, 2020 NVMe

v9 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

PATCH v9 1/1 nvme-fabrics: reject I/O to offline device

Commands get stuck while Host NVMe-oF controller is in reconnect state. NVMe controller enters into reconnect state when it loses connection with the target. It tries to reconnect every 10 seconds
(default) until successful reconnection or until reconnect time-out is reached. The default reconnect time out is 10 minutes.

Applications are expecting commands to complete with success or error within a certain timeout (30 seconds by default). The NVMe host is enforcing that timeout while it is connected, never the less, during reconnection, the timeout is not enforced and commands may get stuck for a long period or even forever.

To fix this long delay due to the default timeout we introduce new session parameter "fast_io_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).

We add a new controller NVME_CTRL_FAILFAST_EXPIRED and respective delayed work that updates the NVME_CTRL_FAILFAST_EXPIRED flag.

When the controller is entering the CONNECTING state, we schedule the delayed_work based on failfast timeout value. If the transition is out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires then set "NVME_CTRL_FAILFAST_EXPIRED" flag to true.

We also update nvmf_fail_nonready_command() and
nvme_available_path() functions with check the
"NVME_CTRL_FAILFAST_EXPIRED" controller flag.

For multipath (function nvme_available_path()):
The path will not be considered available if "NVME_CTRL_FAILFAST_EXPIRED" controller flag is set and the controller in NVME_CTRL_CONNECTING state. This prevents commands from getting stuck
when available paths have tried to reconnect for too long.

Signed-off-by Victor Gladkov <victor.gladkov at kioxia.com>
Signed-off-by Chaitanya Kulkarni <chaitanya.kulkarni at wdc.com>
Reviewed-by Hannes Reinecke <hare at suse.de>

---
Changes from V8:

1. Added multipath behavior description as requested by Sagi Grimberg

    (Fri Sep 18 16:38:58 EDT 2020)

Changes from V7:

1. Expanded the patch description as requested by James Smart

    (Thu Aug 13 11:00:25 EDT 2020)

Changes from V6:

1. Changed according to Hannes Reinecke review:
in nvme_start_failfast_work() and nvme_stop_failfast_work() procedures.

Changes from V5:

1. Drop the "off" string option for fast_io_fail_tmo.

Changes from V4:

1. Remove subsysnqn from dev_info just keep "failfast expired" in nvme_failfast_work().
2. Remove excess lock in nvme_failfast_work().
3. Change "timeout disabled" value to -1, '0' is to fail I/O right away now.
4. Add "off" string for fast_io_fail_tmo option as a -1 equivalent.

Changes from V3:

1. BUG_FIX: Fix a bug in nvme_start_failfast_work() amd

    nvme_stop_failfast_work() when accessing ctrl->opts as it will fail
    for PCIe transport when is called nvme_change_ctrl_state()
    from nvme_reset_work(), since we don't set the ctrl->opts for
    PCIe transport.

2. Line wrap in nvme_start_failfast_work(), nvme_parse_option() and for macro NVMF_ALLOWED_OPTS definition.
3. Just like all the state change code add a switch for newly added state handling outside of the state machine in nvme_state_change().
4. nvme_available_path() add /* fallthru */ after if..break inside switch which is under list_for_each_entry_rcu().
5. Align newly added member nvmf_ctrl_options fast_io_fail_tmp.
6. Fix the tabs before if in nvme_available_path() and line wrap for the same.
7. In nvme_failfast_work() use state != NVME_CTRL_CONNECTING

    instead of == to get rid of the parentheses and avoid char > 80.

8. Get rid of the ";" at the end of the comment for @fast_io_fail_tmp.
9. Change the commit log style to match the one we have in the NVMe repo.

Changes from V2:

1. Several coding style and small fixes.
2. Fix the comment for NVMF_DEF_FAIL_FAST_TMO.
3. Don't call functionality from the state machine.
4. Rename fast_fail_tmo -> fast_io_fail_tmo to match SCSI semantics.

Changes from V1:

1. Add a new session parameter called "fast_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect', and its default value is 30 seconds. A value of 0 means no timeout (similar to current behavior).
2. Add a controller flag of "failfast_expired".
3. Add dedicated delayed_work that update the "failfast_expired" controller flag.
4. When entering CONNECTING, schedule the delayed_work based on failfast timeout value. If transition out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires: set "failfast_expired" flag to true.
5. Update nvmf_fail_nonready_command() with check the "failfast_expired" controller flag.

---
 drivers/nvme/host/core.c      | 49
++++++++++++++++++++++++++++++++++++++++++-
 drivers/nvme/host/fabrics.c   | 25 +++++++++++++++++++---
 drivers/nvme/host/fabrics.h   |  5 +++++
 drivers/nvme/host/multipath.c |  5 ++++-
 drivers/nvme/host/nvme.h      |  3 +++
 5 files changed, 82 insertions(+), 5 deletions(-)
drivers/nvme/host/core.c index renamed from drivers/nvme/host/core.c +0 -0

f3c037f..ca990bb 100644

drivers/nvme/host/core.c +0 -0
@@ -137,6 +137,37 @@ int nvme_try_sched_reset(struct nvme_ctrl *ctrl)  }

EXPORT_SYMBOL_GPL(nvme_try_sched_reset);

+static void nvme_failfast_work(struct work_struct *work) {
+ struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
+ struct nvme_ctrl, failfast_work);
+
+ if (ctrl->state != NVME_CTRL_CONNECTING)
+ return;
+
+ set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+ dev_info(ctrl->device, "failfast expired\n");
+ nvme_kick_requeue_lists(ctrl);
+}
+
+static inline void nvme_start_failfast_work(struct nvme_ctrl *ctrl) {
+ if (!ctrl->opts || ctrl->opts->fast_io_fail_tmo == -1)
+ return;
+
+ schedule_delayed_work(&ctrl->failfast_work,
+ ctrl->opts->fast_io_fail_tmo * HZ); }
+
+static inline void nvme_stop_failfast_work(struct nvme_ctrl *ctrl) {
+ if (!ctrl->opts)
+ return;
+
+ cancel_delayed_work_sync(&ctrl->failfast_work);
+ clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags); }
+
int nvme_reset_ctrl(struct nvme_ctrl *ctrl) {
if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING)) @@ -387,8
+418,21 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
}

spin_unlock_irqrestore(&ctrl->lock, flags);
- if (changed && ctrl->state == NVME_CTRL_LIVE)
+ if (changed) {
+ switch (ctrl->state) {
+ case NVME_CTRL_LIVE:
+ if (old_state == NVME_CTRL_CONNECTING)
+ nvme_stop_failfast_work(ctrl);
nvme_kick_requeue_lists(ctrl);
+ break;
+ case NVME_CTRL_CONNECTING:
+ if (old_state == NVME_CTRL_RESETTING)
+ nvme_start_failfast_work(ctrl);
+ break;
+ default:
+ break;
+ }
+ }
return changed;
}
EXPORT_SYMBOL_GPL(nvme_change_ctrl_state);
@@ -4045,6 +4089,7 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl) {
nvme_mpath_stop(ctrl);
nvme_stop_keep_alive(ctrl);
+ nvme_stop_failfast_work(ctrl);
flush_work(&ctrl->async_event_work); cancel_work_sync(&ctrl->fw_act_work);
}
@@ -4111,6 +4156,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
int ret;

ctrl->state = NVME_CTRL_NEW;
+ clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
spin_lock_init(&ctrl->lock); mutex_init(&ctrl->scan_lock); INIT_LIST_HEAD(&ctrl->namespaces);
@@ -4125,6 +4171,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
init_waitqueue_head(&ctrl->state_wq);

INIT_DELAYED_WORK(&ctrl->ka_work, nvme_keep_alive_work);
+ INIT_DELAYED_WORK(&ctrl->failfast_work, nvme_failfast_work);
memset(&ctrl->ka_cmd, 0, sizeof(ctrl->ka_cmd)); ctrl->ka_cmd.common.opcode = nvme_admin_keep_alive;

drivers/nvme/host/fabrics.c index renamed from drivers/nvme/host/fabrics.c +0 -0

2a6c819..4afe173 100644

drivers/nvme/host/fabrics.c +0 -0
@@ -549,6 +549,7 @@ blk_status_t nvmf_fail_nonready_command(struct

nvme_ctrl *ctrl, {
if (ctrl->state != NVME_CTRL_DELETING &&
ctrl->state != NVME_CTRL_DEAD &&
+ !test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags) &&
!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
return BLK_STS_RESOURCE;

@@ -612,6 +613,7 @@ bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
{ NVMF_OPT_NR_WRITE_QUEUES, "nr_write_queues=%d" },
{ NVMF_OPT_NR_POLL_QUEUES, "nr_poll_queues=%d" },
{ NVMF_OPT_TOS, "tos=%d" },
+ { NVMF_OPT_FAIL_FAST_TMO, "fast_io_fail_tmo=%d" },
{ NVMF_OPT_ERR, NULL }
};

@@ -631,6 +633,7 @@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
opts->reconnect_delay = NVMF_DEF_RECONNECT_DELAY;
opts->kato = NVME_DEFAULT_KATO;
opts->duplicate_connect = false;
+ opts->fast_io_fail_tmo = NVMF_DEF_FAIL_FAST_TMO;
opts->hdr_digest = false;
opts->data_digest = false;
opts->tos = -1; /* < 0 == use transport default */ @@ -751,6 +754,17
@@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
pr_warn("ctrl_loss_tmo < 0 will reconnect
forever\n");
ctrl_loss_tmo = token;
break;
+ case NVMF_OPT_FAIL_FAST_TMO:
+ if (match_int(args, &token)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (token >= 0)
+ pr_warn("I/O will fail on reconnect controller after"
+ " %d sec\n", token);
+ opts->fast_io_fail_tmo = token;
+ break;
case NVMF_OPT_HOSTNQN:
if (opts->host) {
pr_err("hostnqn already user-assigned: %s\n", @@ -
881,11 +895,16 @@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
opts->nr_poll_queues = 0;
opts->duplicate_connect = true;
}
- if (ctrl_loss_tmo < 0)
+ if (ctrl_loss_tmo < 0) {
opts->max_reconnects = -1;
- else
+ } else {
opts->max_reconnects = DIV_ROUND_UP(ctrl_loss_tmo,
opts->reconnect_delay);
+ if (ctrl_loss_tmo < opts->fast_io_fail_tmo)
+ pr_warn("failfast tmo (%d) larger than controller "
+ "loss tmo (%d)\n",
+ opts->fast_io_fail_tmo, ctrl_loss_tmo);
+ }

if (!opts->host) {
kref_get(&nvmf_default_host->ref);
@@ -985,7 +1004,7 @@ void nvmf_free_options(struct nvmf_ctrl_options *opts)
#define NVMF_ALLOWED_OPTS (NVMF_OPT_QUEUE_SIZE |
NVMF_OPT_NR_IO_QUEUES | \
NVMF_OPT_KATO | NVMF_OPT_HOSTNQN | \
NVMF_OPT_HOST_ID | NVMF_OPT_DUP_CONNECT
|\
- NVMF_OPT_DISABLE_SQFLOW)
+ NVMF_OPT_DISABLE_SQFLOW |
NVMF_OPT_FAIL_FAST_TMO)

static struct nvme_ctrl *
nvmf_create_ctrl(struct device *dev, const char *buf) diff --git
a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h index a0ec40a..05a1158 100644

drivers/nvme/host/fabrics.h +2 -0
@@ -15,6 +15,8 @@
 #define NVMF_DEF_RECONNECT_DELAY	10
 /* default to 600 seconds of reconnect attempts before giving up */
 #define NVMF_DEF_CTRL_LOSS_TMO		600
+/* default is -1: the fail fast mechanism is disable  */
+#define NVMF_DEF_FAIL_FAST_TMO		-1
 
 /*
  * Define a host as seen by the target.  We allocate one at boot, but also @@ -

56,6 +58,7 @@ enum {
NVMF_OPT_NR_WRITE_QUEUES = 1 << 17,
NVMF_OPT_NR_POLL_QUEUES = 1 << 18,
NVMF_OPT_TOS = 1 << 19,
+ NVMF_OPT_FAIL_FAST_TMO = 1 << 20,
};

/**
@@ -89,6 +92,7 @@ enum {
* @nr_write_queues: number of queues for write I/O
* @nr_poll_queues: number of queues for polling I/O
* @tos: type of service
+ * @fast_io_fail_tmo: Fast I/O fail timeout in seconds */
struct nvmf_ctrl_options {
unsigned mask;
@@ -111,6 +115,7 @@ struct nvmf_ctrl_options {
unsigned int nr_write_queues;
unsigned int nr_poll_queues;
int tos;
+ int fast_io_fail_tmo;
};

/*

drivers/nvme/host/multipath.c +0 -0
index 54603bd..d8b7f45 100644
@@ -278,9 +278,12 @@ static bool nvme_available_path(struct

nvme_ns_head *head)

list_for_each_entry_rcu(ns, &head->list, siblings) {
switch (ns->ctrl->state) {
+ case NVME_CTRL_CONNECTING:
+ if (test_bit(NVME_CTRL_FAILFAST_EXPIRED,
+ &ns->ctrl->flags))
+ break;
case NVME_CTRL_LIVE:
case NVME_CTRL_RESETTING:
- case NVME_CTRL_CONNECTING:
/* fallthru */
return true;
default:

drivers/nvme/host/nvme.h index renamed from drivers/nvme/host/nvme.h +0 -0

2e04a36..9112886 100644

drivers/nvme/host/nvme.h +3 -0
@@ -256,6 +256,7 @@ struct nvme_ctrl {
 	struct work_struct scan_work;
 	struct work_struct async_event_work;
 	struct delayed_work ka_work;
+	struct delayed_work failfast_work;
 	struct nvme_command ka_cmd;
 	struct work_struct fw_act_work;
 	unsigned long events;
@@ -290,6 +291,8 @@ struct nvme_ctrl {
 	u16 icdoff;
 	u16 maxcmd;
 	int nr_reconnects;
+	unsigned long flags;
+#define NVME_CTRL_FAILFAST_EXPIRED	0
 	struct nvmf_ctrl_options *opts;
 
 	struct page *discard_page;

--
1.8.3.1

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

maintainer Reviewed-by on v9 1/1
#1 lore raw

Overall I am fine with this version.

Quoted 371 lines · Victor Gladkov

Commands get stuck while Host NVMe-oF controller is in reconnect state. NVMe controller enters into reconnect state when it loses connection with the target. It tries to reconnect every 10 seconds
(default) until successful reconnection or until reconnect time-out is reached. The default reconnect time out is 10 minutes.

Applications are expecting commands to complete with success or error within a certain timeout (30 seconds by default). The NVMe host is enforcing that timeout while it is connected, never the less, during reconnection, the timeout is not enforced and commands may get stuck for a long period or even forever.

To fix this long delay due to the default timeout we introduce new session parameter "fast_io_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).

We add a new controller NVME_CTRL_FAILFAST_EXPIRED and respective delayed work that updates the NVME_CTRL_FAILFAST_EXPIRED flag.

When the controller is entering the CONNECTING state, we schedule the delayed_work based on failfast timeout value. If the transition is out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires then set "NVME_CTRL_FAILFAST_EXPIRED" flag to true.

We also update nvmf_fail_nonready_command() and
nvme_available_path() functions with check the
"NVME_CTRL_FAILFAST_EXPIRED" controller flag.

For multipath (function nvme_available_path()):
The path will not be considered available if "NVME_CTRL_FAILFAST_EXPIRED" controller flag is set and the controller in NVME_CTRL_CONNECTING state. This prevents commands from getting stuck
when available paths have tried to reconnect for too long.

Signed-off-by Victor Gladkov <victor.gladkov at kioxia.com>
Signed-off-by Chaitanya Kulkarni <chaitanya.kulkarni at wdc.com>
Reviewed-by Hannes Reinecke <hare at suse.de>

---
Changes from V8:

1. Added multipath behavior description as requested by Sagi Grimberg

     (Fri Sep 18 16:38:58 EDT 2020)

Changes from V7:

1. Expanded the patch description as requested by James Smart

     (Thu Aug 13 11:00:25 EDT 2020)

Changes from V6:

1. Changed according to Hannes Reinecke review:
in nvme_start_failfast_work() and nvme_stop_failfast_work() procedures.

Changes from V5:

1. Drop the "off" string option for fast_io_fail_tmo.

Changes from V4:

1. Remove subsysnqn from dev_info just keep "failfast expired" in nvme_failfast_work().
2. Remove excess lock in nvme_failfast_work().
3. Change "timeout disabled" value to -1, '0' is to fail I/O right away now.
4. Add "off" string for fast_io_fail_tmo option as a -1 equivalent.

Changes from V3:

1. BUG_FIX: Fix a bug in nvme_start_failfast_work() amd

     nvme_stop_failfast_work() when accessing ctrl->opts as it will fail
     for PCIe transport when is called nvme_change_ctrl_state()
     from nvme_reset_work(), since we don't set the ctrl->opts for
     PCIe transport.

2. Line wrap in nvme_start_failfast_work(), nvme_parse_option() and for macro NVMF_ALLOWED_OPTS definition.
3. Just like all the state change code add a switch for newly added state handling outside of the state machine in nvme_state_change().
4. nvme_available_path() add /* fallthru */ after if..break inside switch which is under list_for_each_entry_rcu().
5. Align newly added member nvmf_ctrl_options fast_io_fail_tmp.
6. Fix the tabs before if in nvme_available_path() and line wrap for the same.
7. In nvme_failfast_work() use state != NVME_CTRL_CONNECTING

     instead of == to get rid of the parentheses and avoid char > 80.

8. Get rid of the ";" at the end of the comment for @fast_io_fail_tmp.
9. Change the commit log style to match the one we have in the NVMe repo.

Changes from V2:

1. Several coding style and small fixes.
2. Fix the comment for NVMF_DEF_FAIL_FAST_TMO.
3. Don't call functionality from the state machine.
4. Rename fast_fail_tmo -> fast_io_fail_tmo to match SCSI semantics.

Changes from V1:

1. Add a new session parameter called "fast_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect', and its default value is 30 seconds. A value of 0 means no timeout (similar to current behavior).
2. Add a controller flag of "failfast_expired".
3. Add dedicated delayed_work that update the "failfast_expired" controller flag.
4. When entering CONNECTING, schedule the delayed_work based on failfast timeout value. If transition out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires: set "failfast_expired" flag to true.
5. Update nvmf_fail_nonready_command() with check the "failfast_expired" controller flag.

---
  drivers/nvme/host/core.c      | 49
++++++++++++++++++++++++++++++++++++++++++-
  drivers/nvme/host/fabrics.c   | 25 +++++++++++++++++++---
  drivers/nvme/host/fabrics.h   |  5 +++++
  drivers/nvme/host/multipath.c |  5 ++++-
  drivers/nvme/host/nvme.h      |  3 +++
  5 files changed, 82 insertions(+), 5 deletions(-)
drivers/nvme/host/core.c index renamed from drivers/nvme/host/core.c +0 -0

f3c037f..ca990bb 100644

drivers/nvme/host/core.c +43 -1
@@ -137,6 +137,37 @@ int nvme_try_sched_reset(struct nvme_ctrl *ctrl)  }
 EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
 
+static void nvme_failfast_work(struct work_struct *work) {
+	struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
+			struct nvme_ctrl, failfast_work);
+
+	if (ctrl->state != NVME_CTRL_CONNECTING)
+		return;
+
+	set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+	dev_info(ctrl->device, "failfast expired\n");
+	nvme_kick_requeue_lists(ctrl);
+}
+
+static inline void nvme_start_failfast_work(struct nvme_ctrl *ctrl) {
+	if (!ctrl->opts || ctrl->opts->fast_io_fail_tmo == -1)
+		return;
+
+	schedule_delayed_work(&ctrl->failfast_work,
+			      ctrl->opts->fast_io_fail_tmo * HZ); }
+
+static inline void nvme_stop_failfast_work(struct nvme_ctrl *ctrl) {
+	if (!ctrl->opts)
+		return;
+
+	cancel_delayed_work_sync(&ctrl->failfast_work);
+	clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags); }
+
  int nvme_reset_ctrl(struct nvme_ctrl *ctrl)  {
  	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING)) @@ -387,8
+418,21 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
  	}
 
  	spin_unlock_irqrestore(&ctrl->lock, flags);
-	if (changed && ctrl->state == NVME_CTRL_LIVE)
+	if (changed) {
+		switch (ctrl->state) {
+			case NVME_CTRL_LIVE:
+				if (old_state == NVME_CTRL_CONNECTING)
+					nvme_stop_failfast_work(ctrl);
   				nvme_kick_requeue_lists(ctrl);
+				break;
+			case NVME_CTRL_CONNECTING:
+				if (old_state == NVME_CTRL_RESETTING)
+					nvme_start_failfast_work(ctrl);
+				break;
+			default:
+				break;
+		}
+	}
  	return changed;
  }
  EXPORT_SYMBOL_GPL(nvme_change_ctrl_state);
@@ -4045,6 +4089,7 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)  {
  	nvme_mpath_stop(ctrl);
  	nvme_stop_keep_alive(ctrl);
+	nvme_stop_failfast_work(ctrl);
  	flush_work(&ctrl->async_event_work);
  	cancel_work_sync(&ctrl->fw_act_work);
  }
@@ -4111,6 +4156,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct
 device *dev,
  	int ret;
 
  	ctrl->state = NVME_CTRL_NEW;
+	clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
  	spin_lock_init(&ctrl->lock);
  	mutex_init(&ctrl->scan_lock);
  	INIT_LIST_HEAD(&ctrl->namespaces);
drivers/nvme/host/core.c +1 -0
@@ -4125,6 +4171,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct
 device *dev,
  	init_waitqueue_head(&ctrl->state_wq);
 
  	INIT_DELAYED_WORK(&ctrl->ka_work, nvme_keep_alive_work);
+	INIT_DELAYED_WORK(&ctrl->failfast_work, nvme_failfast_work);
  	memset(&ctrl->ka_cmd, 0, sizeof(ctrl->ka_cmd));
  	ctrl->ka_cmd.common.opcode = nvme_admin_keep_alive;
drivers/nvme/host/fabrics.c index renamed from drivers/nvme/host/fabrics.c +0 -0

2a6c819..4afe173 100644

drivers/nvme/host/fabrics.c +3 -0
@@ -549,6 +549,7 @@ blk_status_t nvmf_fail_nonready_command(struct
 nvme_ctrl *ctrl,  {
  	if (ctrl->state != NVME_CTRL_DELETING &&
  	    ctrl->state != NVME_CTRL_DEAD &&
+	    !test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags) &&
  	    !blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
  		return BLK_STS_RESOURCE;
 
@@ -612,6 +613,7 @@ bool __nvmf_check_ready(struct nvme_ctrl *ctrl,
 struct request *rq,
  	{ NVMF_OPT_NR_WRITE_QUEUES,	"nr_write_queues=%d"	},
  	{ NVMF_OPT_NR_POLL_QUEUES,	"nr_poll_queues=%d"	},
  	{ NVMF_OPT_TOS,			"tos=%d"		},
+	{ NVMF_OPT_FAIL_FAST_TMO,	"fast_io_fail_tmo=%d"	},
  	{ NVMF_OPT_ERR,			NULL			}
  };
@@ -631,6 +633,7 @@ static int nvmf_parse_options(struct
 nvmf_ctrl_options *opts,
  	opts->reconnect_delay = NVMF_DEF_RECONNECT_DELAY;
  	opts->kato = NVME_DEFAULT_KATO;
  	opts->duplicate_connect = false;
+	opts->fast_io_fail_tmo = NVMF_DEF_FAIL_FAST_TMO;
  	opts->hdr_digest = false;
  	opts->data_digest = false;

opts->tos = -1; /* < 0 == use transport default */ @@ -751,6 +754,17
@@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
pr_warn("ctrl_loss_tmo < 0 will reconnect
forever\n");
ctrl_loss_tmo = token;
break;

drivers/nvme/host/fabrics.c +11 -0
+		case NVMF_OPT_FAIL_FAST_TMO:
+			if (match_int(args, &token)) {
+				ret = -EINVAL;
+				goto out;
+			}
+
+			if (token >= 0)
+				pr_warn("I/O will fail on reconnect controller after"
+					" %d sec\n", token);
+			opts->fast_io_fail_tmo = token;
+			break;
  		case NVMF_OPT_HOSTNQN:
  			if (opts->host) {
  				pr_err("hostnqn already user-assigned: %s\n", @@ -

881,11 +895,16 @@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
opts->nr_poll_queues = 0; opts->duplicate_connect = true;
}

drivers/nvme/host/fabrics.c +8 -3
-	if (ctrl_loss_tmo < 0)
+	if (ctrl_loss_tmo < 0) {
  		opts->max_reconnects = -1;
-	else
+	} else {
  		opts->max_reconnects = DIV_ROUND_UP(ctrl_loss_tmo,
  						opts->reconnect_delay);
+		if (ctrl_loss_tmo < opts->fast_io_fail_tmo)
+			pr_warn("failfast tmo (%d) larger than controller "
+				"loss tmo (%d)\n",
+				opts->fast_io_fail_tmo, ctrl_loss_tmo);
+	}
 
  	if (!opts->host) {
  		kref_get(&nvmf_default_host->ref);
@@ -985,7 +1004,7 @@ void nvmf_free_options(struct nvmf_ctrl_options
 *opts)
  #define NVMF_ALLOWED_OPTS	(NVMF_OPT_QUEUE_SIZE |
 NVMF_OPT_NR_IO_QUEUES | \
  				 NVMF_OPT_KATO | NVMF_OPT_HOSTNQN | \
  				 NVMF_OPT_HOST_ID | NVMF_OPT_DUP_CONNECT
 |\
-				 NVMF_OPT_DISABLE_SQFLOW)
+				 NVMF_OPT_DISABLE_SQFLOW |

NVMF_OPT_FAIL_FAST_TMO)

static struct nvme_ctrl *
nvmf_create_ctrl(struct device *dev, const char *buf) diff --git
a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h index a0ec40a..05a1158 100644

drivers/nvme/host/fabrics.h +2 -0
@@ -15,6 +15,8 @@
  #define NVMF_DEF_RECONNECT_DELAY	10
  /* default to 600 seconds of reconnect attempts before giving up */
  #define NVMF_DEF_CTRL_LOSS_TMO		600
+/* default is -1: the fail fast mechanism is disable  */
+#define NVMF_DEF_FAIL_FAST_TMO		-1
 
  /*
   * Define a host as seen by the target.  We allocate one at boot, but also @@ -

56,6 +58,7 @@ enum {
NVMF_OPT_NR_WRITE_QUEUES = 1 << 17,
NVMF_OPT_NR_POLL_QUEUES = 1 << 18,
NVMF_OPT_TOS = 1 << 19,

drivers/nvme/host/fabrics.h +3 -0
+	NVMF_OPT_FAIL_FAST_TMO	= 1 << 20,
  };
 
  /**
@@ -89,6 +92,7 @@ enum {
   * @nr_write_queues: number of queues for write I/O
   * @nr_poll_queues: number of queues for polling I/O
   * @tos: type of service
+ * @fast_io_fail_tmo: Fast I/O fail timeout in seconds
   */
  struct nvmf_ctrl_options {
  	unsigned		mask;
@@ -111,6 +115,7 @@ struct nvmf_ctrl_options {
  	unsigned int		nr_write_queues;
  	unsigned int		nr_poll_queues;
  	int			tos;
+	int			fast_io_fail_tmo;
  };
 
  /*
drivers/nvme/host/multipath.c +4 -1
index 54603bd..d8b7f45 100644
@@ -278,9 +278,12 @@ static bool nvme_available_path(struct
 nvme_ns_head *head)
 
  	list_for_each_entry_rcu(ns, &head->list, siblings) {
  		switch (ns->ctrl->state) {
+		case NVME_CTRL_CONNECTING:
+			if (test_bit(NVME_CTRL_FAILFAST_EXPIRED,
+				     &ns->ctrl->flags))
+				break;
  		case NVME_CTRL_LIVE:
  		case NVME_CTRL_RESETTING:
-		case NVME_CTRL_CONNECTING:
  			/* fallthru */
  			return true;

default:

drivers/nvme/host/nvme.h index renamed from drivers/nvme/host/nvme.h +0 -0

2e04a36..9112886 100644

drivers/nvme/host/nvme.h +3 -1
@@ -256,6 +256,7 @@ struct nvme_ctrl {
  	struct work_struct scan_work;
  	struct work_struct async_event_work;
  	struct delayed_work ka_work;
+	struct delayed_work failfast_work;
  	struct nvme_command ka_cmd;
  	struct work_struct fw_act_work;
  	unsigned long events;
@@ -290,6 +291,8 @@ struct nvme_ctrl {
  	u16 icdoff;
  	u16 maxcmd;
  	int nr_reconnects;
+	unsigned long flags;
+#define NVME_CTRL_FAILFAST_EXPIRED	0
  	struct nvmf_ctrl_options *opts;
 
  	struct page *discard_page;
--

1.8.3.1

Quoted 5 lines

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

#2 lore raw
In reply to Victor Gladkov
Quoted 149 lines · Victor Gladkov

Commands get stuck while Host NVMe-oF controller is in reconnect state. NVMe controller enters into reconnect state when it loses connection with the target. It tries to reconnect every 10 seconds
(default) until successful reconnection or until reconnect time-out is reached. The default reconnect time out is 10 minutes.

Applications are expecting commands to complete with success or error within a certain timeout (30 seconds by default). The NVMe host is enforcing that timeout while it is connected, never the less, during reconnection, the timeout is not enforced and commands may get stuck for a long period or even forever.

To fix this long delay due to the default timeout we introduce new session parameter "fast_io_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).

We add a new controller NVME_CTRL_FAILFAST_EXPIRED and respective delayed work that updates the NVME_CTRL_FAILFAST_EXPIRED flag.

When the controller is entering the CONNECTING state, we schedule the delayed_work based on failfast timeout value. If the transition is out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires then set "NVME_CTRL_FAILFAST_EXPIRED" flag to true.

We also update nvmf_fail_nonready_command() and
nvme_available_path() functions with check the
"NVME_CTRL_FAILFAST_EXPIRED" controller flag.

For multipath (function nvme_available_path()):
The path will not be considered available if "NVME_CTRL_FAILFAST_EXPIRED" controller flag is set and the controller in NVME_CTRL_CONNECTING state. This prevents commands from getting stuck
when available paths have tried to reconnect for too long.

Signed-off-by Victor Gladkov <victor.gladkov at kioxia.com>
Signed-off-by Chaitanya Kulkarni <chaitanya.kulkarni at wdc.com>
Reviewed-by Hannes Reinecke <hare at suse.de>

---
Changes from V8:

1. Added multipath behavior description as requested by Sagi Grimberg

     (Fri Sep 18 16:38:58 EDT 2020)

Changes from V7:

1. Expanded the patch description as requested by James Smart

     (Thu Aug 13 11:00:25 EDT 2020)

Changes from V6:

1. Changed according to Hannes Reinecke review:
in nvme_start_failfast_work() and nvme_stop_failfast_work() procedures.

Changes from V5:

1. Drop the "off" string option for fast_io_fail_tmo.

Changes from V4:

1. Remove subsysnqn from dev_info just keep "failfast expired" in nvme_failfast_work().
2. Remove excess lock in nvme_failfast_work().
3. Change "timeout disabled" value to -1, '0' is to fail I/O right away now.
4. Add "off" string for fast_io_fail_tmo option as a -1 equivalent.

Changes from V3:

1. BUG_FIX: Fix a bug in nvme_start_failfast_work() amd

     nvme_stop_failfast_work() when accessing ctrl->opts as it will fail
     for PCIe transport when is called nvme_change_ctrl_state()
     from nvme_reset_work(), since we don't set the ctrl->opts for
     PCIe transport.

2. Line wrap in nvme_start_failfast_work(), nvme_parse_option() and for macro NVMF_ALLOWED_OPTS definition.
3. Just like all the state change code add a switch for newly added state handling outside of the state machine in nvme_state_change().
4. nvme_available_path() add /* fallthru */ after if..break inside switch which is under list_for_each_entry_rcu().
5. Align newly added member nvmf_ctrl_options fast_io_fail_tmp.
6. Fix the tabs before if in nvme_available_path() and line wrap for the same.
7. In nvme_failfast_work() use state != NVME_CTRL_CONNECTING

     instead of == to get rid of the parentheses and avoid char > 80.

8. Get rid of the ";" at the end of the comment for @fast_io_fail_tmp.
9. Change the commit log style to match the one we have in the NVMe repo.

Changes from V2:

1. Several coding style and small fixes.
2. Fix the comment for NVMF_DEF_FAIL_FAST_TMO.
3. Don't call functionality from the state machine.
4. Rename fast_fail_tmo -> fast_io_fail_tmo to match SCSI semantics.

Changes from V1:

1. Add a new session parameter called "fast_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect', and its default value is 30 seconds. A value of 0 means no timeout (similar to current behavior).
2. Add a controller flag of "failfast_expired".
3. Add dedicated delayed_work that update the "failfast_expired" controller flag.
4. When entering CONNECTING, schedule the delayed_work based on failfast timeout value. If transition out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires: set "failfast_expired" flag to true.
5. Update nvmf_fail_nonready_command() with check the "failfast_expired" controller flag.

---
  drivers/nvme/host/core.c      | 49
++++++++++++++++++++++++++++++++++++++++++-
  drivers/nvme/host/fabrics.c   | 25 +++++++++++++++++++---
  drivers/nvme/host/fabrics.h   |  5 +++++
  drivers/nvme/host/multipath.c |  5 ++++-
  drivers/nvme/host/nvme.h      |  3 +++
  5 files changed, 82 insertions(+), 5 deletions(-)
drivers/nvme/host/core.c index renamed from drivers/nvme/host/core.c +0 -0

f3c037f..ca990bb 100644

drivers/nvme/host/core.c +16 -0
@@ -137,6 +137,37 @@ int nvme_try_sched_reset(struct nvme_ctrl *ctrl)  }
 EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
 
+static void nvme_failfast_work(struct work_struct *work) {
+	struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
+			struct nvme_ctrl, failfast_work);
+
+	if (ctrl->state != NVME_CTRL_CONNECTING)
+		return;
+
+	set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+	dev_info(ctrl->device, "failfast expired\n");
+	nvme_kick_requeue_lists(ctrl);
+}
+
+static inline void nvme_start_failfast_work(struct nvme_ctrl *ctrl) {
+	if (!ctrl->opts || ctrl->opts->fast_io_fail_tmo == -1)
+		return;
+

drivers/nvme/host/core.c int nvme_try_sched_reset(struct nvme_ctrl *ctrl) } · line 164

Quoted 10 lines
drivers/nvme/host/core.c +10 -0
+	schedule_delayed_work(&ctrl->failfast_work,
+			      ctrl->opts->fast_io_fail_tmo * HZ); }
+
+static inline void nvme_stop_failfast_work(struct nvme_ctrl *ctrl) {
+	if (!ctrl->opts)
+		return;
+
+	cancel_delayed_work_sync(&ctrl->failfast_work);
+	clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags); }
+

Formatting; closing brace needs to go on a separate line.

Quoted 104 lines
drivers/nvme/host/core.c +17 -1
  int nvme_reset_ctrl(struct nvme_ctrl *ctrl)  {
  	if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING)) @@ -387,8
+418,21 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
  	}
 
  	spin_unlock_irqrestore(&ctrl->lock, flags);
-	if (changed && ctrl->state == NVME_CTRL_LIVE)
+	if (changed) {
+		switch (ctrl->state) {
+			case NVME_CTRL_LIVE:
+				if (old_state == NVME_CTRL_CONNECTING)
+					nvme_stop_failfast_work(ctrl);
   				nvme_kick_requeue_lists(ctrl);
+				break;
+			case NVME_CTRL_CONNECTING:
+				if (old_state == NVME_CTRL_RESETTING)
+					nvme_start_failfast_work(ctrl);
+				break;
+			default:
+				break;
+		}
+	}
  	return changed;
  }
  EXPORT_SYMBOL_GPL(nvme_change_ctrl_state);
@@ -4045,6 +4089,7 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)  {
  	nvme_mpath_stop(ctrl);
  	nvme_stop_keep_alive(ctrl);
+	nvme_stop_failfast_work(ctrl);
  	flush_work(&ctrl->async_event_work);
  	cancel_work_sync(&ctrl->fw_act_work);
  }
@@ -4111,6 +4156,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct
 device *dev,
  	int ret;
 
  	ctrl->state = NVME_CTRL_NEW;
+	clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
  	spin_lock_init(&ctrl->lock);
  	mutex_init(&ctrl->scan_lock);
  	INIT_LIST_HEAD(&ctrl->namespaces);
drivers/nvme/host/core.c +1 -0
@@ -4125,6 +4171,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct
 device *dev,
  	init_waitqueue_head(&ctrl->state_wq);
 
  	INIT_DELAYED_WORK(&ctrl->ka_work, nvme_keep_alive_work);
+	INIT_DELAYED_WORK(&ctrl->failfast_work, nvme_failfast_work);
  	memset(&ctrl->ka_cmd, 0, sizeof(ctrl->ka_cmd));
  	ctrl->ka_cmd.common.opcode = nvme_admin_keep_alive;
drivers/nvme/host/fabrics.c index renamed from drivers/nvme/host/fabrics.c +0 -0

2a6c819..4afe173 100644

drivers/nvme/host/fabrics.c +3 -0
@@ -549,6 +549,7 @@ blk_status_t nvmf_fail_nonready_command(struct
 nvme_ctrl *ctrl,  {
  	if (ctrl->state != NVME_CTRL_DELETING &&
  	    ctrl->state != NVME_CTRL_DEAD &&
+	    !test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags) &&
  	    !blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
  		return BLK_STS_RESOURCE;
 
@@ -612,6 +613,7 @@ bool __nvmf_check_ready(struct nvme_ctrl *ctrl,
 struct request *rq,
  	{ NVMF_OPT_NR_WRITE_QUEUES,	"nr_write_queues=%d"	},
  	{ NVMF_OPT_NR_POLL_QUEUES,	"nr_poll_queues=%d"	},
  	{ NVMF_OPT_TOS,			"tos=%d"		},
+	{ NVMF_OPT_FAIL_FAST_TMO,	"fast_io_fail_tmo=%d"	},
  	{ NVMF_OPT_ERR,			NULL			}
  };
@@ -631,6 +633,7 @@ static int nvmf_parse_options(struct
 nvmf_ctrl_options *opts,
  	opts->reconnect_delay = NVMF_DEF_RECONNECT_DELAY;
  	opts->kato = NVME_DEFAULT_KATO;
  	opts->duplicate_connect = false;
+	opts->fast_io_fail_tmo = NVMF_DEF_FAIL_FAST_TMO;
  	opts->hdr_digest = false;
  	opts->data_digest = false;

opts->tos = -1; /* < 0 == use transport default */ @@ -751,6 +754,17
@@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
pr_warn("ctrl_loss_tmo < 0 will reconnect
forever\n");
ctrl_loss_tmo = token;
break;

drivers/nvme/host/fabrics.c +11 -0
+		case NVMF_OPT_FAIL_FAST_TMO:
+			if (match_int(args, &token)) {
+				ret = -EINVAL;
+				goto out;
+			}
+
+			if (token >= 0)
+				pr_warn("I/O will fail on reconnect controller after"
+					" %d sec\n", token);
+			opts->fast_io_fail_tmo = token;
+			break;
  		case NVMF_OPT_HOSTNQN:
  			if (opts->host) {
  				pr_err("hostnqn already user-assigned: %s\n", @@ -

881,11 +895,16 @@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts,
opts->nr_poll_queues = 0; opts->duplicate_connect = true;
}

drivers/nvme/host/fabrics.c

Quoted 5 lines
drivers/nvme/host/fabrics.c +2 -2
-	if (ctrl_loss_tmo < 0)
+	if (ctrl_loss_tmo < 0) {
  		opts->max_reconnects = -1;
-	else
+	} else {

Formatting: no need for braces around single-line statements.

drivers/nvme/host/fabrics.c

Quoted 7 lines

opts->max_reconnects = DIV_ROUND_UP(ctrl_loss_tmo,
opts->reconnect_delay);

drivers/nvme/host/fabrics.c +5 -0
+		if (ctrl_loss_tmo < opts->fast_io_fail_tmo)
+			pr_warn("failfast tmo (%d) larger than controller "
+				"loss tmo (%d)\n",
+				opts->fast_io_fail_tmo, ctrl_loss_tmo);
+	}

If we already check for that condition, shouldn't we disable fast_io_fail_tmo in that situation to clarify things?

Quoted 21 lines
  	if (!opts->host) {
  		kref_get(&nvmf_default_host->ref);
drivers/nvme/host/fabrics.c +1 -1
@@ -985,7 +1004,7 @@ void nvmf_free_options(struct nvmf_ctrl_options
 *opts)
  #define NVMF_ALLOWED_OPTS	(NVMF_OPT_QUEUE_SIZE |
 NVMF_OPT_NR_IO_QUEUES | \
  				 NVMF_OPT_KATO | NVMF_OPT_HOSTNQN | \
  				 NVMF_OPT_HOST_ID | NVMF_OPT_DUP_CONNECT
 |\
-				 NVMF_OPT_DISABLE_SQFLOW)
+				 NVMF_OPT_DISABLE_SQFLOW |

NVMF_OPT_FAIL_FAST_TMO)

static struct nvme_ctrl *
nvmf_create_ctrl(struct device *dev, const char *buf) diff --git
a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h index a0ec40a..05a1158 100644

drivers/nvme/host/fabrics.h line 20

Quoted 6 lines
drivers/nvme/host/fabrics.h +2 -0
@@ -15,6 +15,8 @@
  #define NVMF_DEF_RECONNECT_DELAY	10
  /* default to 600 seconds of reconnect attempts before giving up */
  #define NVMF_DEF_CTRL_LOSS_TMO		600
+/* default is -1: the fail fast mechanism is disable  */
+#define NVMF_DEF_FAIL_FAST_TMO		-1
 

disabled

Quoted 31 lines
drivers/nvme/host/fabrics.h +0 -0
  /*
   * Define a host as seen by the target.  We allocate one at boot, but also @@ -

56,6 +58,7 @@ enum {
NVMF_OPT_NR_WRITE_QUEUES = 1 << 17,
NVMF_OPT_NR_POLL_QUEUES = 1 << 18,
NVMF_OPT_TOS = 1 << 19,

drivers/nvme/host/fabrics.h +3 -0
+	NVMF_OPT_FAIL_FAST_TMO	= 1 << 20,
  };
 
  /**
@@ -89,6 +92,7 @@ enum {
   * @nr_write_queues: number of queues for write I/O
   * @nr_poll_queues: number of queues for polling I/O
   * @tos: type of service
+ * @fast_io_fail_tmo: Fast I/O fail timeout in seconds
   */
  struct nvmf_ctrl_options {
  	unsigned		mask;
@@ -111,6 +115,7 @@ struct nvmf_ctrl_options {
  	unsigned int		nr_write_queues;
  	unsigned int		nr_poll_queues;
  	int			tos;
+	int			fast_io_fail_tmo;
  };
 
  /*
drivers/nvme/host/multipath.c +0 -0
index 54603bd..d8b7f45 100644

drivers/nvme/host/multipath.c static bool nvme_available_path(struct · line 285

Quoted 8 lines
drivers/nvme/host/multipath.c +4 -0
@@ -278,9 +278,12 @@ static bool nvme_available_path(struct
 nvme_ns_head *head)
 
  	list_for_each_entry_rcu(ns, &head->list, siblings) {
  		switch (ns->ctrl->state) {
+		case NVME_CTRL_CONNECTING:
+			if (test_bit(NVME_CTRL_FAILFAST_EXPIRED,
+				     &ns->ctrl->flags))
+				break;

No. We shouldn't select this path, but that doesn't mean that all other paths in this list can't be selected, either; they might be coming from different controllers.
Please use 'continue' here.

Quoted 28 lines
drivers/nvme/host/multipath.c +0 -1
  		case NVME_CTRL_LIVE:
  		case NVME_CTRL_RESETTING:
-		case NVME_CTRL_CONNECTING:
  			/* fallthru */
  			return true;

default:

drivers/nvme/host/nvme.h index renamed from drivers/nvme/host/nvme.h +0 -0

2e04a36..9112886 100644

drivers/nvme/host/nvme.h +3 -1
@@ -256,6 +256,7 @@ struct nvme_ctrl {
  	struct work_struct scan_work;
  	struct work_struct async_event_work;
  	struct delayed_work ka_work;
+	struct delayed_work failfast_work;
  	struct nvme_command ka_cmd;
  	struct work_struct fw_act_work;
  	unsigned long events;
@@ -290,6 +291,8 @@ struct nvme_ctrl {
  	u16 icdoff;
  	u16 maxcmd;
  	int nr_reconnects;
+	unsigned long flags;
+#define NVME_CTRL_FAILFAST_EXPIRED	0
  	struct nvmf_ctrl_options *opts;
 
  	struct page *discard_page;
--
Quoted 2 lines

1.8.3.1

Otherwise looks good.

Cheers,

Hannes

Signature · 9 lines
Dr. Hannes Reinecke                Kernel Storage Architect
[email protected]                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
#4 lore raw
In reply to Victor Gladkov
Quoted 117 lines · Victor Gladkov

Commands get stuck while Host NVMe-oF controller is in reconnect state. NVMe controller enters into reconnect state when it loses connection with the target. It tries to reconnect every 10 seconds
(default) until successful reconnection or until reconnect time-out is reached. The default reconnect time out is 10 minutes.

Applications are expecting commands to complete with success or error within a certain timeout (30 seconds by default). The NVMe host is enforcing that timeout while it is connected, never the less, during reconnection, the timeout is not enforced and commands may get stuck for a long period or even forever.

To fix this long delay due to the default timeout we introduce new session parameter "fast_io_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).

We add a new controller NVME_CTRL_FAILFAST_EXPIRED and respective delayed work that updates the NVME_CTRL_FAILFAST_EXPIRED flag.

When the controller is entering the CONNECTING state, we schedule the delayed_work based on failfast timeout value. If the transition is out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires then set "NVME_CTRL_FAILFAST_EXPIRED" flag to true.

We also update nvmf_fail_nonready_command() and
nvme_available_path() functions with check the
"NVME_CTRL_FAILFAST_EXPIRED" controller flag.

For multipath (function nvme_available_path()):
The path will not be considered available if "NVME_CTRL_FAILFAST_EXPIRED" controller flag is set and the controller in NVME_CTRL_CONNECTING state. This prevents commands from getting stuck
when available paths have tried to reconnect for too long.

Signed-off-by Victor Gladkov <victor.gladkov at kioxia.com>
Signed-off-by Chaitanya Kulkarni <chaitanya.kulkarni at wdc.com>
Reviewed-by Hannes Reinecke <hare at suse.de>

---
Changes from V8:

1. Added multipath behavior description as requested by Sagi Grimberg

     (Fri Sep 18 16:38:58 EDT 2020)

Changes from V7:

1. Expanded the patch description as requested by James Smart

     (Thu Aug 13 11:00:25 EDT 2020)

Changes from V6:

1. Changed according to Hannes Reinecke review:
in nvme_start_failfast_work() and nvme_stop_failfast_work() procedures.

Changes from V5:

1. Drop the "off" string option for fast_io_fail_tmo.

Changes from V4:

1. Remove subsysnqn from dev_info just keep "failfast expired" in nvme_failfast_work().
2. Remove excess lock in nvme_failfast_work().
3. Change "timeout disabled" value to -1, '0' is to fail I/O right away now.
4. Add "off" string for fast_io_fail_tmo option as a -1 equivalent.

Changes from V3:

1. BUG_FIX: Fix a bug in nvme_start_failfast_work() amd

     nvme_stop_failfast_work() when accessing ctrl->opts as it will fail
     for PCIe transport when is called nvme_change_ctrl_state()
     from nvme_reset_work(), since we don't set the ctrl->opts for
     PCIe transport.

2. Line wrap in nvme_start_failfast_work(), nvme_parse_option() and for macro NVMF_ALLOWED_OPTS definition.
3. Just like all the state change code add a switch for newly added state handling outside of the state machine in nvme_state_change().
4. nvme_available_path() add /* fallthru */ after if..break inside switch which is under list_for_each_entry_rcu().
5. Align newly added member nvmf_ctrl_options fast_io_fail_tmp.
6. Fix the tabs before if in nvme_available_path() and line wrap for the same.
7. In nvme_failfast_work() use state != NVME_CTRL_CONNECTING

     instead of == to get rid of the parentheses and avoid char > 80.

8. Get rid of the ";" at the end of the comment for @fast_io_fail_tmp.
9. Change the commit log style to match the one we have in the NVMe repo.

Changes from V2:

1. Several coding style and small fixes.
2. Fix the comment for NVMF_DEF_FAIL_FAST_TMO.
3. Don't call functionality from the state machine.
4. Rename fast_fail_tmo -> fast_io_fail_tmo to match SCSI semantics.

Changes from V1:

1. Add a new session parameter called "fast_fail_tmo". The timeout is measured in seconds from the controller reconnect, any command beyond that timeout is rejected. The new parameter value may be passed during 'connect', and its default value is 30 seconds. A value of 0 means no timeout (similar to current behavior).
2. Add a controller flag of "failfast_expired".
3. Add dedicated delayed_work that update the "failfast_expired" controller flag.
4. When entering CONNECTING, schedule the delayed_work based on failfast timeout value. If transition out of CONNECTING, terminate delayed work item and ensure failfast_expired is false. If delayed work item expires: set "failfast_expired" flag to true.
5. Update nvmf_fail_nonready_command() with check the "failfast_expired" controller flag.

Quoted 9 lines
---
  drivers/nvme/host/core.c      | 49
++++++++++++++++++++++++++++++++++++++++++-
  drivers/nvme/host/fabrics.c   | 25 +++++++++++++++++++---
  drivers/nvme/host/fabrics.h   |  5 +++++
  drivers/nvme/host/multipath.c |  5 ++++-
  drivers/nvme/host/nvme.h      |  3 +++
  5 files changed, 82 insertions(+), 5 deletions(-)

I did some more experiments with this, and found that there are some issues with ANA handling.
If reconnect works, but the ANA state indicates that we still can't sent I/O (eg by still being in transitioning), we hit the 'requeueing I/O' state despite fast_io_fail_tmo being set. Not sure if that's the expected outcome. For that it might be better to move the FAILFAST_EXPIRED bit into the namespace, as then we could selectively clear the bit in nvme_failfast_work():

@@ -151,12 +151,16 @@ EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
static void nvme_failfast_work(struct work_struct *work) {
struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
struct nvme_ctrl, failfast_work);
+ struct nvme_ns *ns;

- if (ctrl->state != NVME_CTRL_CONNECTING)
- return;
-
-

-       set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+       down_read(&ctrl->namespaces_rwsem);
+       list_for_each_entry(ns, &ctrl->namespaces, list) {

+ if (ctrl->state != NVME_CTRL_LIVE ||
+ (ns->ana_state != NVME_ANA_OPTIMIZED &&
+ ns->ana_state != NVME_ANA_NONOPTIMIZED))
+ set_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
+ }

+       up_read(&ctrl->namespaces_rwsem);
        dev_info(ctrl->device, "failfast expired\n");

...and we could leave the failfast worker running even after the controller transitioned to LIVE. Cf the attached patch for details.

Cheers,

Hannes

Signature · 4 lines
Dr. Hannes Reinecke		           Kernel Storage Architect
[email protected]			                  +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer

From a9bfa1edc7566bdaac8d330cd813fe2c0d0728cb Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <[email protected]>
Date: Thu, 1 Oct 2020 10:52:27 +0200
Subject: [PATCH] nvme: move FAILFAST_EXPIRED bit into namespace

Rather than having the FAILFAST_EXPIRED bit being a flag on the controller move it into the namespace. This allows the failfast mechanism to cover ANA states, too, which might indicate that I/O isn't possible despite the controller being LIVE.

---
 drivers/nvme/host/core.c      | 26 ++++++++++++++++----------
 drivers/nvme/host/fabrics.c   |  4 +++-
 drivers/nvme/host/multipath.c | 11 ++++++-----
 drivers/nvme/host/nvme.h      |  3 +--
 4 files changed, 26 insertions(+), 18 deletions(-)
drivers/nvme/host/core.c +16 -10
index 0d571aa3cc97..b458508b0c91 100644
@@ -151,12 +151,16 @@ EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
 static void nvme_failfast_work(struct work_struct *work) {
 	struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
 			struct nvme_ctrl, failfast_work);
+	struct nvme_ns *ns;
 
-	if (ctrl->state != NVME_CTRL_CONNECTING)
-		return;
-
-
-	set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+	down_read(&ctrl->namespaces_rwsem);
+	list_for_each_entry(ns, &ctrl->namespaces, list) {
+		if (ctrl->state != NVME_CTRL_LIVE ||
+		    (ns->ana_state != NVME_ANA_OPTIMIZED &&
+		     ns->ana_state != NVME_ANA_NONOPTIMIZED))
+			set_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
+	}
+	up_read(&ctrl->namespaces_rwsem);
 	dev_info(ctrl->device, "failfast expired\n");
 	nvme_kick_requeue_lists(ctrl);
 }
@@ -172,11 +176,16 @@ static inline void nvme_start_failfast_work(struct nvme_ctrl *ctrl)
 
 static inline void nvme_stop_failfast_work(struct nvme_ctrl *ctrl)
 {
+	struct nvme_ns *ns;
+
 	if (!ctrl->opts)
 		return;
 
 	cancel_delayed_work_sync(&ctrl->failfast_work);
-	clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+	down_read(&ctrl->namespaces_rwsem);
+	list_for_each_entry(ns, &ctrl->namespaces, list)
+		clear_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
+	up_read(&ctrl->namespaces_rwsem);
 }
 
 int nvme_reset_ctrl(struct nvme_ctrl *ctrl)
@@ -391,11 +400,9 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 	switch (new_state) {
 	case NVME_CTRL_LIVE:
 		switch (old_state) {
-		case NVME_CTRL_CONNECTING:
-			nvme_stop_failfast_work(ctrl);
-			fallthrough;
 		case NVME_CTRL_NEW:
 		case NVME_CTRL_RESETTING:
+		case NVME_CTRL_CONNECTING:
 			changed = true;
 			fallthrough;
 		default:
@@ -4482,7 +4489,6 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
 	int ret;
 
 	ctrl->state = NVME_CTRL_NEW;
-	clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
 	spin_lock_init(&ctrl->lock);
 	mutex_init(&ctrl->scan_lock);
 	INIT_LIST_HEAD(&ctrl->namespaces);
drivers/nvme/host/fabrics.c +3 -1
index 6404cbf41c96..d706fb5c3b19 100644
@@ -547,9 +547,11 @@ static struct nvmf_transport_ops *nvmf_lookup_transport(
 blk_status_t nvmf_fail_nonready_command(struct nvme_ctrl *ctrl,
 		struct request *rq)
 {
+	struct nvme_ns *ns = rq->rq_disk->private_data;
+
 	if (ctrl->state != NVME_CTRL_DELETING_NOIO &&
 	    ctrl->state != NVME_CTRL_DEAD &&
-	    !test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags) &&
+	    !test_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags) &&
 	    !blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
 		return BLK_STS_RESOURCE;
 
drivers/nvme/host/multipath.c +6 -5
index 0e08ca6e0264..2738f08b2a07 100644
@@ -155,9 +155,8 @@ static bool nvme_path_is_disabled(struct nvme_ns *ns)
 	    ns->ctrl->state != NVME_CTRL_DELETING)
 		return true;
 	if (test_bit(NVME_NS_ANA_PENDING, &ns->flags) ||
-	    test_bit(NVME_NS_REMOVING, &ns->flags))
-		return true;
-	if (test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ns->ctrl->flags))
+	    test_bit(NVME_NS_REMOVING, &ns->flags) ||
+	    test_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags))
 		return true;
 	return false;
 }
@@ -281,7 +280,7 @@ static bool nvme_available_path(struct nvme_ns_head *head)
 	struct nvme_ns *ns;
 
 	list_for_each_entry_rcu(ns, &head->list, siblings) {
-		if (test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ns->ctrl->flags))
+		if (test_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags))
 			continue;
 		switch (ns->ctrl->state) {
 		case NVME_CTRL_LIVE:
@@ -490,8 +489,10 @@ static void nvme_update_ns_ana_state(struct nvme_ana_group_desc *desc,
 	ns->ana_state = desc->state;
 	clear_bit(NVME_NS_ANA_PENDING, &ns->flags);
 
-	if (nvme_state_is_live(ns->ana_state))
+	if (nvme_state_is_live(ns->ana_state)) {
+		clear_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
 		nvme_mpath_set_live(ns);
+	}
 }
 
 static int nvme_update_ana_state(struct nvme_ctrl *ctrl,
drivers/nvme/host/nvme.h +1 -2
index 37be7d16ab15..3163aa9fcf6d 100644
@@ -338,8 +338,6 @@ struct nvme_ctrl {
 	u16 icdoff;
 	u16 maxcmd;
 	int nr_reconnects;
-	unsigned long flags;
-#define NVME_CTRL_FAILFAST_EXPIRED	0
 	struct nvmf_ctrl_options *opts;
 
 	struct page *discard_page;
@@ -451,6 +449,7 @@ struct nvme_ns {
 #define NVME_NS_REMOVING	0
 #define NVME_NS_DEAD     	1
 #define NVME_NS_ANA_PENDING	2
+#define NVME_NS_FAILFAST_EXPIRED 3
 
 	struct nvme_fault_inject fault_inject;
 
Signature · 1 line
2.16.4

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

#5 lore raw
Quoted 48 lines

-----Original Message-----
From: Hannes Reinecke [mailto:[email protected]]
Sent: Thursday, 01 October, 2020 11:55

Quoted 9 lines
---
  drivers/nvme/host/core.c      | 49
++++++++++++++++++++++++++++++++++++++++++-
  drivers/nvme/host/fabrics.c   | 25 +++++++++++++++++++---
  drivers/nvme/host/fabrics.h   |  5 +++++
  drivers/nvme/host/multipath.c |  5 ++++-
  drivers/nvme/host/nvme.h      |  3 +++
  5 files changed, 82 insertions(+), 5 deletions(-)

I did some more experiments with this, and found that there are some issues with ANA handling.
If reconnect works, but the ANA state indicates that we still can't sent I/O (eg by still being in transitioning), we hit the 'requeueing I/O'
state despite fast_io_fail_tmo being set. Not sure if that's the expected outcome.
For that it might be better to move the FAILFAST_EXPIRED bit into the namespace, as then we could selectively clear the bit in nvme_failfast_work():

drivers/nvme/host/core.c +9 -5
@@ -151,12 +151,16 @@ EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
  static void nvme_failfast_work(struct work_struct *work) {
         struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
                         struct nvme_ctrl, failfast_work);
+       struct nvme_ns *ns;
 
-       if (ctrl->state != NVME_CTRL_CONNECTING)
-               return;
-
-
-       set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+       down_read(&ctrl->namespaces_rwsem);
+       list_for_each_entry(ns, &ctrl->namespaces, list) {
+               if (ctrl->state != NVME_CTRL_LIVE ||
+                   (ns->ana_state != NVME_ANA_OPTIMIZED &&
+                    ns->ana_state != NVME_ANA_NONOPTIMIZED))
+                       set_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
+       }
+       up_read(&ctrl->namespaces_rwsem);
         dev_info(ctrl->device, "failfast expired\n");
 

...and we could leave the failfast worker running even after the controller transitioned to LIVE.
Cf the attached patch for details.

Quoted 4 lines

Cheers,

Hannes
--

I'm not sure what makes sense to move the FAILFAST_EXPIRED bit into the namespace, Because the failfast mechanism characterizes the controller as a whole.

Any comments on this?

Regards,
Victor

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

#6 lore raw
Quoted 48 lines · Victor Gladkov
Quoted 48 lines

-----Original Message-----
From: Hannes Reinecke [mailto:[email protected]]
Sent: Thursday, 01 October, 2020 11:55

Quoted 9 lines
---
   drivers/nvme/host/core.c      | 49
++++++++++++++++++++++++++++++++++++++++++-
   drivers/nvme/host/fabrics.c   | 25 +++++++++++++++++++---
   drivers/nvme/host/fabrics.h   |  5 +++++
   drivers/nvme/host/multipath.c |  5 ++++-
   drivers/nvme/host/nvme.h      |  3 +++
   5 files changed, 82 insertions(+), 5 deletions(-)

I did some more experiments with this, and found that there are some issues with ANA handling.
If reconnect works, but the ANA state indicates that we still can't sent I/O (eg by still being in transitioning), we hit the 'requeueing I/O'
state despite fast_io_fail_tmo being set. Not sure if that's the expected outcome.
For that it might be better to move the FAILFAST_EXPIRED bit into the namespace, as then we could selectively clear the bit in nvme_failfast_work():

drivers/nvme/host/core.c +9 -5
@@ -151,12 +151,16 @@ EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
   static void nvme_failfast_work(struct work_struct *work) {
          struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
                          struct nvme_ctrl, failfast_work);
+       struct nvme_ns *ns;
 
-       if (ctrl->state != NVME_CTRL_CONNECTING)
-               return;
-
-
-       set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+       down_read(&ctrl->namespaces_rwsem);
+       list_for_each_entry(ns, &ctrl->namespaces, list) {
+               if (ctrl->state != NVME_CTRL_LIVE ||
+                   (ns->ana_state != NVME_ANA_OPTIMIZED &&
+                    ns->ana_state != NVME_ANA_NONOPTIMIZED))
+                       set_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
+       }
+       up_read(&ctrl->namespaces_rwsem);
          dev_info(ctrl->device, "failfast expired\n");
 

...and we could leave the failfast worker running even after the controller transitioned to LIVE.
Cf the attached patch for details.

Quoted 8 lines
Quoted 4 lines

Cheers,

Hannes
--

I'm not sure what makes sense to move the FAILFAST_EXPIRED bit into the namespace, Because the failfast mechanism characterizes the controller as a whole.

Oh, yes, I'm aware of that. But the problem here is with multipath; how do we handle the situation where all controllers have the 'failfast_expired' bit set? Should I/O be terminated (which I think it should, given that failfast is supposed to terminate the I/O)?
Or should I/O continue to run (as it does with your original patch)?

Cheers,

Hannes

Signature · 9 lines
Dr. Hannes Reinecke                Kernel Storage Architect
[email protected]                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
maintainer
#7 lore raw
Quoted 34 lines
Quoted 26 lines
Quoted 26 lines
drivers/nvme/host/core.c +9 -5
@@ -151,12 +151,16 @@ EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
    static void nvme_failfast_work(struct work_struct *work) {
           struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
                           struct nvme_ctrl, failfast_work);
+       struct nvme_ns *ns;
 
-       if (ctrl->state != NVME_CTRL_CONNECTING)
-               return;
-
-
-       set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+       down_read(&ctrl->namespaces_rwsem);
+       list_for_each_entry(ns, &ctrl->namespaces, list) {
+               if (ctrl->state != NVME_CTRL_LIVE ||
+                   (ns->ana_state != NVME_ANA_OPTIMIZED &&
+                    ns->ana_state != NVME_ANA_NONOPTIMIZED))
+                       set_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
+       }
+       up_read(&ctrl->namespaces_rwsem);
           dev_info(ctrl->device, "failfast expired\n");
 

...and we could leave the failfast worker running even after the controller transitioned to LIVE.
Cf the attached patch for details.

Quoted 8 lines
Quoted 4 lines

Cheers,

Hannes

I'm not sure what makes sense to move the FAILFAST_EXPIRED bit into the namespace, Because the failfast mechanism characterizes the controller as a whole.

Quoted 3 lines

Oh, yes, I'm aware of that. But the problem here is with multipath; how do we handle the situation where all controllers have the 'failfast_expired' bit set? Should I/O be terminated (which I think it should, given that failfast is supposed to terminate the I/O)?
Or should I/O continue to run (as it does with your original patch)?

I do agree that fast_io_fail_tmo _is_ a controller attribute and should remain as such.

I do see what is your point Hannes, however I also think it's problematic that the host may fail arbitrary I/O if the controller happens to enter ANA inaccessible state (or have state transition timeout) for a period that happens to be longer than what the user happen to set (without communicating any of this to the controller).

IFF we want to address this (I'm still not sure), we probably want to activate failfast timeout in ANA state transition (and clear it when we exit it). Then we can modify nvme_available_path() to take NVME_CTRL_FAILFAST_EXPIRED into account.

Anyways, I think that this can be an incremental patch because it doesn't change the behavior today with respect to ANA states (or transition between them) e.g. queue the outstanding I/O.

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme

Reviewed-by
#8 lore raw
Quoted 47 lines · Sagi Grimberg
Quoted 34 lines
Quoted 26 lines
Quoted 26 lines
drivers/nvme/host/core.c +9 -5
@@ -151,12 +151,16 @@ EXPORT_SYMBOL_GPL(nvme_try_sched_reset);
    static void nvme_failfast_work(struct work_struct *work) {
           struct nvme_ctrl *ctrl = container_of(to_delayed_work(work),
                           struct nvme_ctrl, failfast_work);
+       struct nvme_ns *ns;
 
-       if (ctrl->state != NVME_CTRL_CONNECTING)
-               return;
-
-
-       set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags);
+       down_read(&ctrl->namespaces_rwsem);
+       list_for_each_entry(ns, &ctrl->namespaces, list) {
+               if (ctrl->state != NVME_CTRL_LIVE ||
+                   (ns->ana_state != NVME_ANA_OPTIMIZED &&
+                    ns->ana_state != NVME_ANA_NONOPTIMIZED))
+                       set_bit(NVME_NS_FAILFAST_EXPIRED, &ns->flags);
+       }
+       up_read(&ctrl->namespaces_rwsem);
           dev_info(ctrl->device, "failfast expired\n");
 

...and we could leave the failfast worker running even after the controller transitioned to LIVE.
Cf the attached patch for details.

Quoted 8 lines
Quoted 4 lines

Cheers,

Hannes

I'm not sure what makes sense to move the FAILFAST_EXPIRED bit into the namespace, Because the failfast mechanism characterizes the controller as a whole.

Quoted 3 lines

Oh, yes, I'm aware of that. But the problem here is with multipath; how do we handle the situation where all controllers have the 'failfast_expired' bit set? Should I/O be terminated (which I think it should, given that failfast is supposed to terminate the I/O)?
Or should I/O continue to run (as it does with your original patch)?

I do agree that fast_io_fail_tmo _is_ a controller attribute and should remain as such.

I do see what is your point Hannes, however I also think it's problematic that the host may fail arbitrary I/O if the controller happens to enter ANA inaccessible state (or have state transition timeout) for a period that happens to be longer than what the user happen to set (without communicating any of this to the controller).

Quoted 9 lines

IFF we want to address this (I'm still not sure), we probably want to activate failfast timeout in ANA state transition (and clear it when we exit it). Then we can modify nvme_available_path() to take NVME_CTRL_FAILFAST_EXPIRED into account.

Anyways, I think that this can be an incremental patch because it doesn't change the behavior today with respect to ANA states (or transition between them) e.g. queue the outstanding I/O.

Okay then.
You can add:

Cheers,

Hannes

Signature · 9 lines
Dr. Hannes Reinecke                Kernel Storage Architect
[email protected]                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer

_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme