Skip to contentSkip to conversation

: alsa 1.0.9rc4 + intel 82801FB/.../ = No sound (Benq 52-101)

ALSA - driver 0001134 [email protected] 1 participant 1 message Jun 1, 2005

lore
Share & tools
lore
#0 lore raw

The following issue has been UPDATED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1134>
======================================================================

Reported By:                liangalei
Assigned To:                perex
======================================================================
Project:                    ALSA - driver
Issue ID:                   1134
Category:                   PCI - intel8x0
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
Distribution:               Fedora Core 3
Kernel Version:             2.6.11-1.14
======================================================================
Date Submitted:             05-28-2005 08:49 CEST
Last Modified:              06-01-2005 17:04 CEST

======================================================================
Summary: alsa 1.0.9rc4 + intel 82801FB/.../ = No sound (Benq
52-101)
Description:
My notebook is Benq 52-101, update FC3 to kernel 2.6.11-1.14_FC3

alsamixer report: Card=intel ICH6, chip=Conexant id 3 (Question, Conexant just support modem's AC-97 or else provide whole sound ? )

alsaconf: can find "Intel Corp 82801FB/.../ ICH6 family AC'97 Audio", and will contine to "Have a lot fun".

I have ever, update linux kernel from 2.6.9 to 2.6.11(yum update, no recompiling), and alsa driver from 0.9.0/1.0.8/1.0.9rc3/4.

Recomipling ALsa driver/lib/oss/tools/util.., with drive, ever try ----- ./configure --with-cards=azx (error: no this card) ----- ./configure ; make; make install (no error report), not run ./snddevices

No sound ! So much days, so much test..... (if i915GM chipset + Conexant chip...(see below lspci), will be powered by alsa-1.0.9rc4 ? --- if still not, I will just wait for new alsa-driver.)

thanks
======================================================================

----------------------------------------------------------------------
liangalei - 05-28-05 09:17
----------------------------------------------------------------------
[root@room-1109 ~]# /sbin/lsmod | grep snd

snd_intel8x0           34752  2
snd_ac97_codec         78588  1 snd_intel8x0
snd_mixer_oss          19072  1
snd_pcm                99848  2 snd_intel8x0,snd_ac97_codec
snd_timer              33668  1 snd_pcm
snd                    59396  7
snd_intel8x0,snd_ac97_codec,snd_mixer_oss,snd_pcm,snd_timer
soundcore              10785  2 snd
snd_page_alloc         10244  2 snd_intel8x0,snd_pcm

[root@room-1109 ~]#

----------------------------------------------------------------------
liangalei - 05-30-05 03:29
----------------------------------------------------------------------
hinted by https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1078
I have a look at my /proc/asound, it looks like following, ----- Is it strange? I see many "off" ---- but I cannot turn-ONs them, by either alsamixer or aumix, because in alsamixer jack-bars, them can not be seen !

[lal@lal ~]$ cat /proc/asound/card0/codec97#0/ac97#0-0 0-0/0: Conexant id 31

Revision : 0x00
Compat. Class : 0x00
Subsys. Vendor ID: 0x0000
Subsys. ID : 0x0000

Capabilities     :
DAC resolution   : 18-bit
ADC resolution   : 18-bit
3D enhancement   : No 3D Stereo Enhancement

Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off

3D enhancement   : off
Loudness         : off
Mono output      : MIX
Mic select       : Mic1

ADC/DAC loopback : off
Extended ID : codec=0 rev=2 AMAP LDAC SDAC CDAC DSA=0 SPDIF
Extended status : PRL SPCV LDAC SDAC CDAC SPDIF=10/11
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
Extended modem ID: codec=0 LIN1
Modem status : PRA(GPIO) PRB(res) PRC(ADC1) PRD(DAC1) PRE(ADC2)
PRF(DAC2) PRG(HADC) PRH(HDAC)
Line1 rate : 48000Hz
[lal@lal ~]$

----------------------------------------------------------------------
tiwai - 06-01-05 16:58
----------------------------------------------------------------------
I suspect it's not a Conexant codec. The driver seems to fail detection of the codec.

This kind of problems is often related with ACPI. Try to tune the ACPI boot setting.

Issue History
Date Modified Username Field Change
======================================================================

05-28-05 08:49 liangalei      New Issue                                    
05-28-05 08:49 liangalei      Distribution              => Fedora Core 3   
05-28-05 08:49 liangalei      Kernel Version            => 2.6.11-1.14     
05-28-05 09:17 liangalei      Note Added: 0004759                          
05-28-05 09:18 liangalei      Issue Monitored: liangalei                    
05-30-05 03:29 liangalei      Note Added: 0004795                          
06-01-05 16:58 tiwai          Note Added: 0004863                          
06-01-05 17:04 tiwai          Category                 0_compilation problem_!!!

=> PCI - intel8x0
======================================================================

-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005