hwmon: (tmp513) Fix build issue by selecting CONFIG_REGMAP_I2C
PATCH 1/1 hwmon: (tmp513) Fix build issue by selecting CONFIG_REGMAP_I2C
Thanks for the review, Guenter.
---
This driver requires REGMAP_I2C to build. Select it by default in Kconfig. Reported at gentoo bugzilla: https://bugs.gentoo.org/710790
Reported-by Phil Stracchino <[email protected]>
Signed-off-by Mike Pagano <[email protected]>
--- drivers/hwmon/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/hwmon/Kconfig +1 -0
@@ -1769,6 +1769,7 @@ config SENSORS_TMP421 config SENSORS_TMP513 tristate "Texas Instruments TMP513 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for Texas Instruments TMP512, and TMP513 temperature and power supply sensor chips.
Signature · 1 line
2.24.1
Guenter Roeck
maintainerQuoted 2 lines · Mike Pagano
Thanks for the review, Guenter.
---
Please have a look into Documentation/process/submitting-patches.rst.
This is not a resubmit, and above comments should come after ---, not before it. On top of that, it is corrupted (tabs replaced with spaces).
Guenter
Quoted 26 lines
This driver requires
REGMAP_I2Cto build. Select it by default inKconfig. Reported at gentoo bugzilla: https://bugs.gentoo.org/710790Reported-by Phil Stracchino <[email protected]>Signed-off-by Mike Pagano <[email protected]>--- drivers/hwmon/Kconfig | 1 + 1 file changed, 1 insertion(+)drivers/hwmon/Kconfig +1
-0@@ -1769,6 +1769,7 @@ config SENSORS_TMP421 config SENSORS_TMP513 tristate "Texas Instruments TMP513 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for Texas Instruments TMP512, and TMP513 temperature and power supply sensor chips.Signature · 1 line
2.24.1