add pam to busybox

hi all
i tryed to add pam tp busybox.
i make pam with build=i386-linux --host=arm-none-linux-gnueabi and enable pam at busybox config file
when i build the busybox i see this error

LINK busybox_unstripped

Trying libraries: crypt m pam pam_misc
Failed: -Wl,--start-group -lcrypt -lm -lpam -lpam_misc -Wl,--end-group
.....
skipping incompatible /Linux-PAM-0.80/libpam/libpam.a when searching for
-lpam /CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/./../../../arm-none-linux-gnueabi/bin/ld:
cannot find -lpam
skipping incompatible /Linux-PAM-0.80/libpam/libpam.so when searching for
-lpam /CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/./../../../arm-none-linux-gnueabi/bin/ld:
cannot find -lpam
collect2: ld returned 1 exit status
make[1]: *** [busybox_unstripped] Error 1
make[1]: Leaving directory

how can i fixed this error?

View this message in context: http://old.nabble.com/add-pam-to-busybox-tp32325731p32325731.html
Sent from the Buildroot (busybox) mailing list archive at Nabble.com.

Hello,

Le Sun, 28 Aug 2011 22:34:09 -0700 (PDT),
brro1 <[email protected]> a ?crit :

I guess your pam is improperly configured, compiled or installed.

I would recommend to add the necessary pam packages to the Buildroot packages and then make Busybox depend on it.

Regards,

Thomas

Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com