: route plugin: unneeded ttable levels propagation
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1169>
======================================================================
Reported By: Andrew Assigned To: perex ====================================================================== Project: ALSA - lib Issue ID: 1169 Category: 1_pcm - digital audio Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 06-08-2005 07:51 CEST Last Modified: 06-17-2005 14:58 CEST
======================================================================
Summary: route plugin: unneeded ttable levels propagation
Description:
v.1.0.9a is in use. All 1.0.9rcX have the same effect.
To replicate stereo to all eight channles I use this fragment in my .asoundrc file:
pcm.!default {
type plug
slave {
pcm "2x4"
format S32_LE
}
}pcm.2x4 {
type route
slave.pcm surround71
slave.channels 8
ttable.0.0 0.03
ttable.1.1 0.03
ttable.0.2 1
ttable.1.3 1
ttable.0.4 1
ttable.1.5 1
ttable.0.6 1
ttable.1.7 1
} All works fine except for levels are reduced for ALL channles rather channels 0 and 1 only (the aim is to balance headphone output channels 0-1 with external amplifier(s) channels 2-7 levels).
Terratec Aureon 7.1 Space is in use.
I have selected "major" level as such situation is very error-prone:
unexpected high level output is possible which is danger for ears.
======================================================================
----------------------------------------------------------------------
Andrew - 06-16-05 19:24
----------------------------------------------------------------------
Perex,
'aplay -v -D2x4 41.wav' doesn't work:
Playing WAVE '41.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: set_params:882: Sample format non available
'aplay -v -Dplug:2x4 41.wav' output is below ("0.1" level for ch.0,1 is used).
I have tried 'aplay -Dplug:front <somefile>' and 'aplay -Dplug:rear <somefile>' without any problems - they work the same way level as with level "1" in ttable.
(I don't think there are some mixer mismatches as I was able to create own config file for qamix :-)
=============== 'aplay -v -Dplug:2x4 41.wav' output ========== Playing WAVE '41.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16buffer_size : 8192period_size : 2048period_time : 46439tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 2048xfer_align : 2048start_threshold : 8192stop_threshold : 8192silence_threshold: 0silence_size : 0
boundary : 1073741824
Slave: Route conversion PCM
Transformation table:
0 <- 0*0.1
1 <- 1*0.1
2 <- 0
3 <- 1
4 <- 0
5 <- 1
6 <- 0
7 <- 1
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S32_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 32buffer_size : 8192period_size : 2048period_time : 46439tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 2048xfer_align : 2048start_threshold : 8192stop_threshold : 8192silence_threshold: 0silence_size : 0
boundary : 1073741824
Slave: Hardware PCM card 0 'Terratec Aureon 7.1-Space' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S32_LE
subformat : STD
channels : 8
rate : 44100
exact rate : 44100 (44100/1)
msbits : 24buffer_size : 8192period_size : 2048period_time : 46439tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 2048xfer_align : 2048start_threshold : 8192stop_threshold : 8192silence_threshold: 0silence_size : 0
boundary : 1073741824
----------------------------------------------------------------------
tiwai - 06-17-05 14:58
----------------------------------------------------------------------
The ttable output looks OK to me. But you stillget the same volumes (multiplied with 0.1) on all channels, right?
Issue History
Date Modified Username Field Change
======================================================================
06-08-05 07:51 Andrew New Issue 06-16-05 15:04 perex Status new => assigned 06-16-05 15:04 perex Assigned To => perex 06-16-05 15:34 perex Project ALSA - driver => ALSA - lib 06-16-05 15:35 perex Category PCI - ice1724 => 1_pcm - digital audio 06-16-05 15:44 perex Note Added: 0005061 06-16-05 19:24 Andrew Note Added: 0005063 06-17-05 14:58 tiwai Note Added: 0005074
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click