Skip to contentSkip to conversation

ARM: OMAP: fix workqueue changes

PATCH In review Kyungmin Park 3 participants 3 messages Dec 22, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: OMAP: fix workqueue changes

[PATCH] ARM: OMAP: fix workqueue changes

--

drivers/mmc/omap.c +3 -3
index 1852268..f46aed7 100644
@@ -582,9 +582,9 @@ static void mmc_omap_switch_timer(unsigned long arg)
 	schedule_work(&host->switch_work);
 }
 
-static void mmc_omap_switch_handler(void *data)
+static void mmc_omap_switch_handler(struct work_struct *work)
 {
-	struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, switch_work);
 	struct mmc_card *card;
 	static int complained = 0;
 	int cards = 0, cover_open;
@@ -1122,7 +1122,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, host);
 
 	if (host->switch_pin >= 0) {
-		INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host);
+		INIT_WORK(&host->switch_work, mmc_omap_switch_handler);
 		init_timer(&host->switch_timer);
 		host->switch_timer.function = mmc_omap_switch_timer;
 		host->switch_timer.data = (unsigned long) host;
drivers/spi/omap2_mcspi.c +4 -4
index 634aca1..b8d0ec0 100644
@@ -634,7 +634,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
 	if (!cs) {
-		cs = kzalloc(sizeof *cs, SLAB_KERNEL);
+		cs = kzalloc(sizeof *cs, GFP_KERNEL);
 		if (!cs)
 			return -ENOMEM;
 		spi->controller_state = cs;
@@ -669,9 +669,9 @@ static void omap2_mcspi_cleanup(const struct spi_device *spi)
 }
 
 
-static void omap2_mcspi_work(void * arg)
+static void omap2_mcspi_work(struct work_struct *work)
 {
-	struct omap2_mcspi	*mcspi = (struct omap2_mcspi *) arg;
+	struct omap2_mcspi	*mcspi = container_of(work, struct omap2_mcspi, work);
 	unsigned long		flags;
 
 	spin_lock_irqsave(&mcspi->lock, flags);
@@ -820,7 +820,7 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
 	
 	mcspi->base = io_p2v(r->start);
 
-	INIT_WORK(&mcspi->work, omap2_mcspi_work, mcspi);
+	INIT_WORK(&mcspi->work, omap2_mcspi_work);
 
 	spin_lock_init(&mcspi->lock);
 	INIT_LIST_HEAD(&mcspi->msg_queue);
#1 lore raw
Quoted 1 line · Kyungmin Park

[PATCH] ARM: OMAP: fix workqueue changes

This kind of patch needs to get submitted upstream ASAP, since that's where the breakage is coming from ... as an MMC patch, I think that means it should goto Pierre Ossman.

Quoted 63 lines

--

drivers/mmc/omap.c +3 -3
index 1852268..f46aed7 100644
@@ -582,9 +582,9 @@ static void mmc_omap_switch_timer(unsigned long arg)
 	schedule_work(&host->switch_work);
 }
 
-static void mmc_omap_switch_handler(void *data)
+static void mmc_omap_switch_handler(struct work_struct *work)
 {
-	struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, switch_work);
 	struct mmc_card *card;
 	static int complained = 0;
 	int cards = 0, cover_open;
@@ -1122,7 +1122,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, host);
 
 	if (host->switch_pin >= 0) {
-		INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host);
+		INIT_WORK(&host->switch_work, mmc_omap_switch_handler);
 		init_timer(&host->switch_timer);
 		host->switch_timer.function = mmc_omap_switch_timer;
 		host->switch_timer.data = (unsigned long) host;
drivers/spi/omap2_mcspi.c +4 -4
index 634aca1..b8d0ec0 100644
@@ -634,7 +634,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 	mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
 	if (!cs) {
-		cs = kzalloc(sizeof *cs, SLAB_KERNEL);
+		cs = kzalloc(sizeof *cs, GFP_KERNEL);
 		if (!cs)
 			return -ENOMEM;
 		spi->controller_state = cs;
@@ -669,9 +669,9 @@ static void omap2_mcspi_cleanup(const struct spi_device *spi)
 }
 
 
-static void omap2_mcspi_work(void * arg)
+static void omap2_mcspi_work(struct work_struct *work)
 {
-	struct omap2_mcspi	*mcspi = (struct omap2_mcspi *) arg;
+	struct omap2_mcspi	*mcspi = container_of(work, struct omap2_mcspi, work);
 	unsigned long		flags;
 
 	spin_lock_irqsave(&mcspi->lock, flags);
@@ -820,7 +820,7 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
 
 	mcspi->base = io_p2v(r->start);
 
-	INIT_WORK(&mcspi->work, omap2_mcspi_work, mcspi);
+	INIT_WORK(&mcspi->work, omap2_mcspi_work);
 
 	spin_lock_init(&mcspi->lock);
 	INIT_LIST_HEAD(&mcspi->msg_queue);
#2 lore raw
Quoted 6 lines · David Brownell
Quoted 1 line · Kyungmin Park

[PATCH] ARM: OMAP: fix workqueue changes

This kind of patch needs to get submitted upstream ASAP, since that's where the breakage is coming from ... as an MMC patch, I think that means it should goto Pierre Ossman.

Pushing today to linux-omap. Kyungmin, please send it to Pierre also. BTW, the patch was missing the last linefeed at the end to apply.

Regards,

Tony