mmc fix for clock-off PXA255/270
PATCH 1/1 mmc fix for clock-off PXA255/270
It solves the problems with clock-off in the PXA255/270 MMC/SD hardware. This solution was testes with our devices and works good. Kernel 2.6.24.4 (but should work with >=2.6.19).
host/pxamci.c renamed from x/work/navi_os/mmc/host/pxamci.c +13 -1
@@ -26,6 +26,7 @@#include <linux/clk.h> #include <linux/err.h> #include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> #include <asm/dma.h> #include <asm/io.h>
@@ -67,6 +68,8 @@unsigned int dma_dir; }; +static int local_cmd =-1 ; +static void pxamci_stop_clock (struct pxamci_host *host) {if (readl (host->base +MMC_STAT ) &STAT_CLK_EN ) {
@@ -84,6 +87,7 @@if (v &STAT_CLK_EN )dev_err (mmc_dev (host->mmc),"unable to stop clock\n" ); + local_cmd =-1 ; } }
@@ -232,6 +235,14 @@ v = w2; } + local_cmd = cmd->opcode; +if ((local_cmd ==MMC_GO_IDLE_STATE ) || + (local_cmd ==MMC_GO_INACTIVE_STATE ) || + (local_cmd ==MMC_SEND_STATUS ) || + (local_cmd ==MMC_STOP_TRANSMISSION ) || + (local_cmd ==MMC_SET_BLOCKLEN ) + )pxamci_stop_clock (host); +if (stat &STAT_TIME_OUT_RESPONSE ) { cmd->error = -ETIMEDOUT ; }else if (stat &STAT_RES_CRC_ERR && cmd->flags &MMC_RSP_CRC ) {
@@ -290,7 +301,7 @@ host->data =NULL ;if (host->mrq->stop) { -pxamci_stop_clock (host); +//pxamci_stop_clock(host); pxamci_start_cmd (host, host->mrq->stop, host->cmdat); }else {pxamci_finish_request (host, host->mrq);