TQM866M CPU glitch
Quoted 32 lines
X-EYOU-SPAMVALUE:100
X-EYOU-DEALDRC:
X-Auth-Info: zjvJMUdItuLN4XakZSaDhHT7x1SrUScONjZbUp+td5M=
X-Auth-Info: zjvJMUdItuLN4XakZSaDhHT7x1SrUScONjZbUp+td5M=
cc: u-boot-users at lists.sourceforge.net
from: wolfgang denk <[email protected]>
Date: Fri, 21 Apr 2006 00:08:06 +0200
Sender: wd at denx.deHello,
Quoted 4 lines · in message <[email protected]> you wrote:
I have a TQM866M board here, and it seems that the ID that this board is using is not checked for in
cpu/mpc8xx/cpu.c- not sure if this patch is usable - but it fixes the problem of indentifying the right CPU for meAny chance that you use old code?
This is supposed to be solved by this commit:
commit
7b4fd36b0322ec98836a8459d9be80e2777fdc05
tree92deb9ddf1153c64ff1ced9392816e60b4ecaa03
parent0a112d8696dcffdf87a7066e2dade1eacbdd80d9
author Wolfgang Denk <[email protected]> Sat, 18 Mar 2006 23:31:12 +0100 committer Wolfgang Denk <[email protected]> Sat, 18 Mar 2006 23:31:12 +0100Add support for MPC859/866 Rev. A.0Quoted 2 lines
A different issue is that I can't get the ehternet to work, the error on network access is:
Quoted 7 lines
Works fine here.
Did you set the jumpers on the board correctly? See the FAQ:
http://www.denx.de/wiki/view/DULG/EthernetProblemsOnTQM8xxLBest regards,
thanks - just pulled the current git tree and the CPU shows up correctly now - and as the above URL suggest - it was the jumpers - we actually did consult the manual regarding jumpers - but we meesed up some how any way :)
thx !
hofrat