Skip to contentSkip to conversation

88E1111S PHY with TSEC1 on MPC8540

U-Boot-Users Rangaraju 1 participant 1 message Mar 19, 2006

lore
Share & tools
lore

Rangaraju

author
#0 lore raw

Hi,

I am using 88E1111S PHY with TSEC1 on MPC8540The whole config for Ethernet config i used below mentioned.
If i look at the Tx function it says packets transmitted ..but unable to get same pkts on ethereal. Link detection is good.
Please help me in this regard what am i missing in u-boot.

Kind Regards,
Rangaraju.

#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_MPC85XX_TSEC1 1
#undef CONFIG_MPC85XX_TSEC1
#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0"
#define CONFIG_MPC85XX_TSEC2 1
#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1"
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 16
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
#define CONFIG_ETHPRIME "TSEC1"

the o/p on console says the PHY detected as

Net: TSEC1: PHY is Marvell 88E1111S (1410cc2)
TSEC1
Hit any key to stop autoboot: 0
8540ES=> ping 10.10.10.22
Speed: 100, full duplex
Using TSEC1 device
sending ARP for 0a0a0a16
ARP broadcast 1
Tx
ARP broadcast 2
Tx
ping failed; host 10.10.10.22 is not alive

--
View this message in context: http://www.nabble.com/88E1111S-PHY-with-TSEC1-on-MPC8540-t1307688.html#a3484188
Sent from the Uboot - Users forum at Nabble.com.