Skip to contentSkip to conversation

Failed to open demux device /dev/dvb/adapter0/demux0 for filter

linux-dvb [email protected] 1 participant 1 message Jul 4, 2008 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

While recording (in mythtv) with a dvb-t usb stick, I'm getting error messages like the following about once per second:

PIDInfo(0): Failed to open demux device /dev/dvb/adapter0/demux0 for filter on pid 0x44c

The stick in question is from Yakumo, I read that there is an identical stick from Freecom. It is recognized as:

14aa:0221 AVerMedia (again) or C&E

The recordings are fine. One thing that seems strange about the stick is that a scan takes many times longer than with my other dvb-t usb sticks (2040:7070 Hauppauge), though as a newbie I don't really know what to expect here.

Any ideas what the problem could be or what I should check?

Thanks,

George

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb