Skip to contentSkip to conversation

A question about "Initialize GOT pointer"

U-Boot XR SU 3 participants 4 messages Oct 26, 2009 – Oct 27, 2009

lore
Share & tools
lore

XR SU

author
#0 lore raw

hi,all:
here is a question, who can tell me? thanks.
?
in uboot file : cpu/mips/start.S
?
/* Initialize GOT pointer.?*/
??????? bal???? 1f
??????? nop
??????? .word?? _GLOBAL_OFFSET_TABLE_
??????? 1:
??????? move??? gp, ra
??????? lw????? t1, 0(ra)
??????? move??? gp, t1
?
I do't know why code "move??? gp, ra"? needed? ?what happened if we remove these code? ?
?
?
?
?

      ___________________________________________________________ 

?????????????????
http://card.mail.cn.yahoo.com/

#1 lore raw

I am not familiar with mips instruction.but i think it mean:
pg=ra
t1=0(ra)
then move t1 to gp.
so u cannot remove it .

2009/10/26 XR SU <[email protected]>

Quoted 33 lines

hi,all:
here is a question, who can tell me? thanks.

in uboot file : cpu/mips/start.S

/* Initialize GOT pointer. */
bal 1f
nop
.word _GLOBAL_OFFSET_TABLE_
1:
move gp, ra
lw t1, 0(ra)
move gp, t1

I do't know why code "move gp, ra" needed? what happened if we remove
these code?

     ___________________________________________________________

?????????????????
http://card.mail.cn.yahoo.com/

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 1 line
JUST DO IT,NOTHING IS IMPOSSIBLE
#2 lore raw
In reply to XR SU
Quoted 14 lines · XR SU

hi,all:
here is a question, who can tell me? thanks.

in uboot file : cpu/mips/start.S

/* Initialize GOT pointer.?*/
??????? bal???? 1f
??????? nop
??????? .word?? _GLOBAL_OFFSET_TABLE_
??????? 1:
??????? move??? gp, ra
??????? lw????? t1, 0(ra)
??????? move??? gp, t1

Quoted 1 line

I do't know why code "move??? gp, ra"? needed? ?what happened if we remove these code?

You're using old code. That was fixed about two years ago.

See http://git.denx.de/?p=u-boot.git;a=commitdiff;h=16664f72850846e645616da1c0fa5afcd6d15f15

#3 lore raw

Sorry,i thought the code is like this(intel asm):

mov ax, 40h
mov ds, ax

ax as an temp registor

2009/10/26 Andrew Dyer <[email protected]>

Quoted 27 lines · XR SU
Quoted 14 lines

hi,all:
here is a question, who can tell me? thanks.

in uboot file : cpu/mips/start.S

/* Initialize GOT pointer. */
bal 1f
nop
.word _GLOBAL_OFFSET_TABLE_
1:
move gp, ra
lw t1, 0(ra)
move gp, t1

Quoted 1 line

I do't know why code "move gp, ra" needed? what happened if we

remove these code?

You're using old code. That was fixed about two years ago.

See
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=16664f72850846e645616da1c0fa5afcd6d15f15
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 1 line
JUST DO IT,NOTHING IS IMPOSSIBLE