BUG: 2.2.0-pre2 on 5500 (and maybe 6500)
Hi !
This bugreport applies to a PMac 5500/225, and maybe a 6500, because they share a common motherboard.
I'm booting 2.2.0-pre2 kernel with BootX.
ftp://ftp.linuxppc.org/linuxppc/linuxppc-pre-R5/RedHat.installer/vmlinux-2.2.0-pre2
No-video problem:
First I'm booting with the "no video" box checked. I get a much too dark picture, I can only see a few shades from the logo. I can't see the login prompt. The last kernel I checked (2.1.127) didn't have this problem.
Possible bug: palette not initialised.
Then I tried without the "no video" box. Now I get no video at all. This is a problem I have since the first Kernel I've seen (2.1.24). Is there a problem with my video-chip ? I've got an ATI chip, ATY264GT-B.
Audio problem:
You'll see in the kernel messages that there is an error during the initialisation of AWACS. Now audio seems to be limited to 8kHz/mono.
BTW: Where has this "woop" sound gone to ? I prefer it much over a simple beep...
I'll try test-kernels, but please reduce them of all options (network, filesystem) that are not needed to test video/audio.
I've got the usual dmesg and a dump of the OF-tree. Anybody interested in seeing this ? It's around 3k.
Jens
P.S.: Patch ? I'd like to, but I have not much information about the hardware. What about starting a project to document all devices in a Mac ?P.P.S: BootX vs. OF: I'm normally booting with OF, but to test kernels I'm using BootX. It's a very nice program...
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to [email protected] ]]
Quoted 3 lines · Jens Ch. Restemeier
This bugreport applies to a PMac 5500/225, and maybe a 6500, because they share a common motherboard.
I'm booting 2.2.0-pre2 kernel with BootX.
Well, the all-important question is does this show up with a vger kernel? (2.1.130)
---
Tom Rini (TR1265)
http://dobbstown.yeti.edu/
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to [email protected] ]]
Quoted 2 lines · Jens Ch. Restemeier
P.S.: Patch ? I'd like to, but I have not much information about the hardware. What about starting a project to document all devices in a Mac
I'll second that. There may be legal issue (NDAs?) involved in having linuxppc share some hardware info, but I hope I am wrong.
Ian K. Erickson iPEG, the Internet Productivity Group Systems Administator W 422 Riverside, Suite 628 [email protected] Spokane, WA 99204 http://www.ipeg.com (509)462-iPEG
4F6E65204F5320746F2072756C65207468656D20616C6C2C204F6E65204F5320746 F2066696E64207468656D2CDA4F6E65204F5320746F206272696E67207468656D20 616C6C20616E6420696E20746865206461726B6E6573732062696E64207468656D
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to [email protected] ]]
Quoted 9 lines · Tom Rini
Quoted 3 lines · Jens Ch. Restemeier
This bugreport applies to a PMac 5500/225, and maybe a 6500, because they share a common motherboard.
I'm booting 2.2.0-pre2 kernel with BootX.Well, the all-important question is does this show up with a vger kernel? (2.1.130)
I built my 2.1.127 kernel with the sources from either ftp.linuxppc.org or samba (can't remeber). I'd try with vger, but I can't do CVS from my Mac. The latest snapshot of vger I've seen around was AGES old.
The 2.2.0 kernel was downloaded as a binary.
Jens
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to [email protected] ]]