Skip to contentSkip to conversation

drm/bridge: sii902x: Enable I/O and core VCC supplies if present

PATCH In review Alex G. 2 participants 2 messages Jan 15, 2021 – Jan 17, 2021 Stable branch

lore
Share & tools
lore

Alex G.

author
#0 lore raw

PATCH 1/1 drm/bridge: sii902x: Enable I/O and core VCC supplies if present

Please consider adding the following fixes to v5.10:

* cc5f7e2fcbe3 drm/bridge: sii902x: Enable I/O and core VCC supplies if present
* 4c1e054322da dt-bindings: display: sii902x: Add supply bindings
* 91b5e26731c5 drm/bridge: sii902x: Refactor init code into separate function

The STM32MP discovery board is a popular ARM platform, containing a GPU and attached display. The display will fail to be initialized if any of the DRM bridges fail initialization. The sii9022 bridge only worked correctly if the firmware enabled the power supplies on boot. This was the case if u-boot was used.

I would like this board to work correctly with v5.10, without needing to make assumptions about the firmware.

Thanks,
Alex

#1 lore raw
Quoted 8 lines · Alex G.

Please consider adding the following fixes to v5.10:

* cc5f7e2fcbe3 drm/bridge: sii902x: Enable I/O and core VCC supplies if present
* 4c1e054322da dt-bindings: display: sii902x: Add supply bindings
* 91b5e26731c5 drm/bridge: sii902x: Refactor init code into separate function

Quoted 8 lines

The STM32MP discovery board is a popular ARM platform, containing a GPU and attached display. The display will fail to be initialized if any of the DRM bridges fail initialization. The sii9022 bridge only worked correctly if the firmware enabled the power supplies on boot. This was the case if u-boot was used.

I would like this board to work correctly with v5.10, without needing to make assumptions about the firmware.

All now queued up, thanks.

greg k-h